Did you use an DSi or an 2DS/3DS please ? And is this the correct NAND if you use an DSi ?
Thank you.
Homebrew [DS(i)/3DS] TWiLight Menu++ - GUI for DS(i) games, and DS(i) Menu replacement
- Thread starter RocketRobz
- Start date
- Views 4,204,438
- Replies 16,042
- Likes 256
Did you use an DSi or an 2DS/3DS please ? And is this the correct NAND if you use an DSi ?
Thank you.
Dsi xl , Yes I did the nand backup, except when I started hiyacfw helper it said "Error No $ GBA footer found". I think that was the message. So I went into hiyacfw helper's Nand mode and put the "eMMC CID" and the "Console ID". Then gives this error.Did you use an DSi or an 2DS/3DS please ? And is this the correct NAND if you use an DSi ?
Thank you.
From where did you get the Console ID and CID please ?
And did you used the FWTool 2.0 for the NAND Backup ?
Thank you.
From where did you get the Console ID and CID please ?
And did you used the FWTool 2.0 for the NAND Backup ?
Thank you.
Attachments
Did you installed UNLAUNCH like in this Guide
https://dsi.cfw.guide/installing-unlaunch-legacy
described ? Did you made your NAND Backup BEFORE or AFTER that Installation please ?
Did you try to make another NAND Backup ?
Thank you.
I did it before and after, and I've backed it up 5 times.
Your regular SD Card (please not an microSD with Adapter at this Point for the Moment) is formatted with FAT32 and not to big ? (>32 GB)
Where is your NAND Backup stored for the HiyaCFW Helper please ? On the PC´s HDD ?
Thank you.
Yes it's on PC, and I'm sorry, I'm using Samsung's microsd adapter. I already formatted using FAT32.
Ok,can you try an normal SD Card (2 -32 GB in size) please ?
And does the Folder with NAND Backup contains these Files (the BIOSxxx one are not needed) ?
Thank you.
Ok,can you try an normal SD Card (2 -32 GB in size) please ?
And does the Folder with NAND Backup contains these Files (the BIOSxxx one are not needed) ?
View attachment 191147
Thank you.
See if I have any common sd, and in the folder there are no such files.
Please try it again (with an regular SD Card is possible please) and look of
THIS MESSAGE apears please !!!
I came back, I'm sorry, I only have one 1gb and another 32mb.
1 GB is ok,the NAND Backup takes approximately 240 MB.
And please run the HiyaCFW Helper as Administrator !!
(right Click on the HiyaCFW_Helper.exe File and choose "Run as Admin" please).
Thank you.
I am backing up.1 GB is ok,the NAND Backup takes approximately 240 MB.
And please run the HiyaCFW Helper as Administrator !!
(right Click on the HiyaCFW_Helper.exe File and choose "Run as Admin" please).
Thank you.
--------------------- MERGED ---------------------------
ready
Attachments
Ok,then please copy from the Folder nds\ the Folder "FW58Bxxxxxxx" with the TWO Files nand.bin and nand.bin.sha1 to your Pc HDD please.
If possible NOT on the System Drive C: please.
Please empty or format your SD Card now.
The TWiLight Menu needs approximately 141MB of free Space.
Then start the HiyaCFW Helper as Administrator,choose the NAND Folder/choose the SD Card Drive Letter please and we will see now.
Good Luck.
Last edited by Alexander1970,
Ok,then please copy from the Folder nds\ the Folder "FW58Bxxxxxxx" with the TWO Files nand.bin and nand.bin.sha1 to your Pc HDD please.
If possible NOT on the System Drive C: please.
Please empty or format your SD Card now.
The TWiLight Menu needs approximately 141MB of free Space.
Then start the HiyaCFW Helper as Administrator,choose the NAND Folder/choose the SD Card Drive Letter please and we will see now.
Good Luck.
Omg
--------------------- MERGED ---------------------------
Ok,then please copy from the Folder nds\ the Folder "FW58Bxxxxxxx" with the TWO Files nand.bin and nand.bin.sha1 to your Pc HDD please.
If possible NOT on the System Drive C: please.
Please empty or format your SD Card now.
The TWiLight Menu needs approximately 141MB of free Space.
Then start the HiyaCFW Helper as Administrator,choose the NAND Folder/choose the SD Card Drive Letter please and we will see now.
Good Luck.
;---;
Attachments
Did the HiyaCFW Helper worked now ?
And the Error Message comes up on the Boot Up ?
A little more Information would help in this Case please.
Thank you.
the installation of hiyacfw helper finished and said to remove the sd card and put it on nintendo ds, i put and started hiyacfw by unlaunch. Then I put to appear the message of nintendo and hit start, then that message appeared.Did the HiyaCFW Helper worked now ?
And the Error Message comes up on the Boot Up ?
A little more Information would help in this Case please.
Thank you.
Ok,you can copy the Content of this SD Card now to the microSD one.
You can also try the HiyaCFW Helper on the microSD Card now too.
If the DSi does not recognize it,you can use the 32GB (or was it really an 32MB one ???) Regular SD Card.
With them the Error Measage should not appear (except all is set correct in UNLAUNCH).
Ok,you can copy the Content of this SD Card now to the microSD one.
You can also try the HiyaCFW Helper on the microSD Card now too.
If the DSi does not recognize it,you can use the 32GB (or was it really an 32MB one ???) Regular SD Card.
With them the Error Measage should not appear (except all is set correct in UNLAUNCH).
Definitely, hiyacfw does not work with SD adapter. I will have to buy an SD to use hiyacfw.Yes it really is a 32mb SD.
Similar threads
-
Xdqwerty
what are you looking at? -
Psionic Roshambo
-
realtimesave
-
-
-
-
@
RedColoredStars:
There is an actual trailer with footage too. lol. Going to watch it tonight. Grabbed it from... a place. -
-
@
SylverReZ:
@Psionic Roshambo, JonTron's back yet again until he disappears into the void for another 6 or so months.+1 -
-
-
-
-
-
-
-
-
-
-
-
-
@
Xdqwerty:
@realtimesave, hey there buddy chum pal friend buddy pal chum bud friend fella bruther amigo pal buddy friend chummy chum chum pal
-
@
Xdqwerty:
@realtimesave, hey there buddy chum pal friend buddy pal chum bud friend fella bruther amigo pal buddy friend chummy chum chum pal
-
-
-
-
-
