Homebrew RELEASE Awoo Installer - A No-Bullshit NSP/NSZ/XCI/XCZ Installer Based on Tinfoil

blawar · Dec 9, 2019

hippy dave said:
They're not "corrupted forever". They work fine and have signatures that match them. They can't be restored from the converted nsp to the original xci, but how often do you want to do that? They can't be verified as the unmodified Nintendo files, because they're modified, but if you've converted them with 4nxci yourself then you know they're fine. If you're downloading someone else's conversion then make sure you trust your source.

The reason is preservation, and safety. We do not want to restore them now, but in the future, we will likely want to. XCI’s specifically are not as prolific as NSP and are at greater risk for being lost in the future. If we needed to pull a rare or lost XCI off of a switch, and it was forever corrupted by 4nxci or @duckbill007 , then that would be a truly said thing.

always modify NCA’s in the least way possible, if not at all.

hippy dave · Dec 9, 2019

blawar said:
The reason is preservation, and safety. We do not want to restore them now, but in the future, we will likely want to. XCI’s specifically are not as prolific as NSP and are at greater risk for being lost in the future. If we needed to pull a rare or lost XCI off of a switch, and it was forever corrupted by 4nxci or @duckbill007 , then that would be a truly said thing.

always modify NCA’s in the least way possible, if not at all.

This feels like a stretch at best (throw all that responsibility at one tagged user, nice touch), but it's just hilarious in the context of you threatening recently to start watermarking all released game nsps because of a personal grudge. You're so full of shit it's comedy gold.

yikkyon · Dec 10, 2019

NSZ files seem to be corrupted when installed but NSP files are perfectly fine. I have tried other NSZs and the same game with NSPs. I have also tried putting the NSZ in the SD and installing it from there. It's only NSZ files that corrupt and kicks me out to the HOME screen. Any thoughts?

linuxares · Dec 10, 2019

@blawar and @hippy dave I see where you both are coming from.

@blawar can't you develop a dumper that can convert xci to proper NSPs? Yes by all means XCIs are proper dumps and converted nsps aren't proper as from the e-shop. Never the less they still work.

Huntereb · Dec 10, 2019

yikkyon said:
NSZ files seem to be corrupted when installed but NSP files are perfectly fine. I have tried other NSZs and the same game with NSPs. I have also tried putting the NSZ in the SD and installing it from there. It's only NSZ files that corrupt and kicks me out to the HOME screen. Any thoughts?

We are aware of this issue and it will be resolved for 1.2.2. In the mean time, use 1.1.0 for nsz installs.

I'll be doing a proper test of everything for 1.2.2, sorry for the inconvenience.

blawar · Dec 10, 2019

linuxares said:
@blawar and @hippy dave I see where you both are coming from.

@blawar can't you develop a dumper that can convert xci to proper NSPs? Yes by all means XCIs are proper dumps and converted nsps aren't proper as from the e-shop. Never the less they still work.

Yes, I plan to add this to Tinfoil. However it will not work with 4NXCI converted XCI's as they destroy info that makes the conversion back to XCI impossible.

linuxares · Dec 10, 2019

blawar said:
Yes, I plan to add this to Tinfoil. However it will not work with 4NXCI converted XCI's as they destroy info that makes the conversion back to XCI impossible.

But can you push that to 4nxci then?

hippy dave · Dec 10, 2019

linuxares said:
But can you push that to 4nxci then?

Nah it's a difference in approach, 4nxci chooses one method of conversion, which isn't compatible with the other method used by other apps.

spotanjo3 · Dec 10, 2019

hippy dave said:
Nah it's a difference in approach, 4nxci chooses one method of conversion, which isn't compatible with the other method used by other apps.

By the way.. good job! Excuse me but... Can I replace background of yours ? I don't like her on the background.

Soojai · Dec 10, 2019

I'm not sure what I'm doing wrong here. I'm running current version of Atmosphere and Hekate to boot. I put Awoo in the switch folder. It launches just fine. I then choose to install a game and it installs immediately. Says the game is installed. I got to the main menu and the game isn't there.

Vanth88 · Dec 10, 2019

Maybe this has been answered before and I apologize if it has but is awoo only supposed to connect once per connection to ns usbloader?

What happens is when I install a game or whatever it disconnects from ns after and when I attemp to click on LAN install it doesn't list anything until I disconnect NS and connect it again. I don't know if this is intentional or something on my end. I used NS USB .9 Windows 10 alternative. The only options I have enabled for NS are allow XCI installation and on Awoo I have Disable Anime and that's it.

BitOSalt · Dec 10, 2019

Good Afternoon everyone

I was hoping someone might know whats up with my Awoo. Everytime I attempt to install an nsp through ns-usbloader, Im met with a message "performrequest:93:". It doesnt seem to matter what game I attempt it with. Im on an updated Atmosphere and Hekate if that accounts for anything. Any insight would be greatly appreciated! In the mean time I'll keep screwing around trying to fix it myself

HookedBehemoth · Dec 10, 2019

Soojai said:
I'm not sure what I'm doing wrong here. I'm running current version of Atmosphere and Hekate to boot. I put Awoo in the switch folder. It launches just fine. I then choose to install a game and it installs immediately. Says the game is installed. I got to the main menu and the game isn't there.

Found and fixed that. Only happened with sd card installs.

shivoooooo · Dec 11, 2019

@Huntereb I recommend putting this information as an index, because many new people will ask the same thing, over and over again

azoreseuropa said:
By the way.. good job! Excuse me but... Can I replace background of yours ? I don't like her on the background.

Yes!
Custom backgrounds

A custom backround image can be placed in /switch/Awoo-Installer as "background.png", 1280x720!

duckbill007 · Dec 11, 2019

blawar said:
and it was forever corrupted by 4nxci or @duckbill007 ,

What do you mean files corrupted by me? I am not corrupting any files. I just told that 4nxci do resign and that I never had any issue with that after install. And do have issues with xci installed by tinfoil especially after FW upgrade.

I have no idea about what wrong what patches exist or not. I am user and see following: "corrupted nsp" from 4nxci works, "not corrupted" from tinfoil not.

As for me as user "corrupted" that works will be better.

Also, all this is done "on the fly" while installing and as far as I understand you can not restore original bit-by-bit identical XCI from installed game on the system. And in this case - what the difference how severe they are corrupted?

spotanjo3 · Dec 11, 2019

shivoooooo said:
@Huntereb I recommend putting this information as an index, because many new people will ask the same thing, over and over again

Yes!
Custom backgrounds

A custom backround image can be placed in /switch/Awoo-Installer as "background.png", 1280x720!

Thank you!!!!

blawar · Dec 11, 2019

duckbill007 said:
What do you mean files corrupted by me? I am not corrupting any files. I just told that 4nxci do resign and that I never had any issue with that after install. And do have issues with xci installed by tinfoil especially after FW upgrade.

I have no idea about what wrong what patches exist or not. I am user and see following: "corrupted nsp" from 4nxci works, "not corrupted" from tinfoil not.

As for me as user "corrupted" that works will be better.

Also, all this is done "on the fly" while installing and as far as I understand you can not restore original bit-by-bit identical XCI from installed game on the system. And in this case - what the difference how severe they are corrupted?

Your understanding is incorrect, Tinfoil installed XCI's can be converted back to XCI's -- 4NXCI converted NSP's cannot.

When you updated, you were missing ACID patches, hence why I told you that your issue was a user issue.

duckbill007 · Dec 13, 2019

blawar said:
Tinfoil installed XCI's can be converted back to XCI

How can it be done if only secure partition is used? other 3 partitions are lost so, restored image won't be bit-by-bit equal to original.

blawar · Dec 13, 2019

duckbill007 said:
How can it be done if only secure partition is used? other 3 partitions are lost so, restored image won't be bit-by-bit equal to original.

The normal partition can be rebuilt, it just holds a copy of the control NCA I believer. Update partition is not needed. SX will mount the resulting XCI and everything will be signed.

bit for bit identical does not matter, as long as everything is signed. XCI’s can never be used to make flash carts because they don’t have all of the gamecart’s info anyway, they exist solely for mounting with SX and converting to NSP

Huntereb · Dec 14, 2019

Awoo Installer 1.2.2

What's new?

- Fixed a bug that caused XCI installations from SD card to fail
- Builds are now compiled with a properly built lib-zstd (large NSZ/XCZ files actually install now)
- Audio notifications for warnings, errors, and complete installations

- Can be disabled by turning your volume down :v)

- Home button is no longer blocked during installations
- Users are now warned about potential instability using Applet Mode
- Losing connection during a LAN/internet install no longer causes the software to crash
- Google Drive API key can now be set in your config.ini

- Will appear in your config after running the software and changing settings once

- Many behind-the-scenes changes for USB installations (Coming soon!)
- Many other small changes and bug fixes

Download

Vanth88 said:
What happens is when I install a game or whatever it disconnects from ns after and when I attemp to click on LAN install it doesn't list anything until I disconnect NS and connect it again. I don't know if this is intentional or something on my end. I used NS USB .9 Windows 10 alternative. The only options I have enabled for NS are allow XCI installation and on Awoo I have Disable Anime and that's it.

This is intended behavior. If you'd like to start another install, just click "Upload to NS" two times after selecting "Install over LAN or Internet".

BitOSalt said:
Good Afternoon everyone I was hoping someone might know whats up with my Awoo. Everytime I attempt to install an nsp through ns-usbloader, Im met with a message "performrequest:93:". It doesnt seem to matter what game I attempt it with. Im on an updated Atmosphere and Hekate if that accounts for anything. Any insight would be greatly appreciated! In the mean time I'll keep screwing around trying to fix it myself

I've seen this issue mentioned previously in the thread. If you're using Mac OS (or any OS really, it's just primarily an issue on Mac OS) you should check your firewall settings.

Homebrew RELEASE Awoo Installer - A No-Bullshit NSP/NSZ/XCI/XCZ Installer Based on Tinfoil

Developer

BBMB

Well-Known Member

The inadequate, autocratic beast!

Well-Known Member

Developer

The inadequate, autocratic beast!

BBMB

Well-Known Member

New Member

Private

New Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Developer

Well-Known Member

Developer

Well-Known Member

Similar threads

Popular threads in this forum