Hacking SWITCH NOOB PARADISE - Ask questions here

MikeyTaylorGaming · Nov 11, 2019

Draxzelex said:
Your previous post indicates you are not booting ReiNX but Atmosphere as indicated by your system settings.

Well, I use the highlighted payload in this screenshot to boot the console... I'm not sure why it states AMS 0.9.4|S as the CFW.

Regardless, and unfortunately, this still doesn't answer why it's the only game out of any that doesn't install correctly. I tried an alternate download for the game too but it has the same error so I'm at a serious loss on this one.

jucaa · Nov 11, 2019

Ok, so pokémon sword has leaked and it requires fw 7.0 to play.
Im on 8.1 but i got an error when i try to install it.

Invalid NCA (might mean missing sigpatches or a too low firmware)

From what i remember, i have sigpatches from 9.0

Atmosphere is 0.9.3, could be this?

Teletron1 · Nov 11, 2019

wanted to update my emmu to 9.4 atmos from 9.3 unpatched 8.0.1, is this a matter of just changing files on the sd card? is it that simple

saw something with nca's and using ChoiDujourNX

Draxzelex · Nov 12, 2019

KessonD said:
Hello everyone, this is my first post so greetings to the whole GBATemp community.

I'm definitely a Switch Noob, and I would like to ask some question.

First of all I'm currently running Switch FW 9.0.1, I bought my Switch on day 1, so it is fully compatibile with the hack.
I'm planning to install Atmosphere CFW, I found several guide online, but I think I'm gonna follow the one linked in this thread.

I do not have a payload injector only the Jig, so I'm planning to do that, following the guide, with my PC. So I have some doubts and questions and I hope you could help me.

1- Regarding the backup file I know there are two different files, NSP (Eshop dump) and XCI (Cartridge dump), and from what I understood it would be somehow safer from preventing bans to use the XCI files (I'll also use the DNS setting to block connections to Nintendo's server). It is possibile to install the XCI files with "Tinfoil" / "Goldleaf" homebrew?

2- What do I need to install in order to run properly "Tinfoil" / "Goldleaf"?

3- On the release note of Tinfoil V6.00, it is written: "Added XCI installation (does not work with Hekate / Kosmos unless you chainload fusee primary)" What does "chainload fusee primary" means? Can someone please explain that?

4- Which homebrew is better?

5- As long I don't reboot/turn off my Switch the hack will be active, right? So it will stays there also after a sleep mode? Is this correct?

So far that's all the questions I have.

Thanks in advantage.

Regards

Kesson

While .XCI files are theoretically safer, they can still get you banned and have gotten numerous people banned already. Only ZeroTwoXCI and dOPUS/n1dus support .XCI file installation
CFW
Chainloading means booting one payload from another. Hekate is a payload and has the ability to load other payloads aka chainloading
Depends on what you want
Yes

krashton1 said:
I recently bought a (day one) switch on 9.0.1. Hacked it following a tutorial from nevercholt tech (below). Made my backups (not particularly old ones since as I said, 9.0.1).

.

I want to set up emuMMC, as it seems like the smart thing to do to avoid getting console banned (I don't really have a reason to ever want online play but best to take precautions now). The creator of the video has a tutorial for setting up an emuMMC for 9.0.0, and through research I found people saying that emuMMC is updated for 9.0.0 and stuff, but nothing in particular for 9.0.1. Can I follow the same tutorial for setting up a emuMMC as a 9.0.0 switch?

emuMMC tutorial is below

Never ever follow YouTube video guides. They are outdated the moment they are released and are not endorsed by any developers. Always follow text-based guides such as this one

My gut feeling tells me that this will be fine but I haven't found any statements online that corroborate that gut feeling.

Megadriver94 said:
What is the difference between .NSP and .XCI?
When do you think Warmboot for the firmwares above 7.0.1 will come to fruition?
What should I do right after I were to use a paperclip to open up the Switch for Homebrew
Do you know about Awooinstaller?

.NSP files are copies of digital content such as games, updates, or DLC while .XCI files are dumps of Switch cartridges.

There are no exploit planned for firmware versions above 7.0.1

Once you use a paperclip to enter RCM, you should enable AutoRCM with Hekate

Awoo-Installer is a title installer that installs .NSP files as well as few other minor features.

mikeyt1998 said:
Well, I use the highlighted payload in this screenshot to boot the console... I'm not sure why it states AMS 0.9.4|S as the CFW.

Regardless, and unfortunately, this still doesn't answer why it's the only game out of any that doesn't install correctly. I tried an alternate download for the game too but it has the same error so I'm at a serious loss on this one.

I would recommend doing a fresh installation of ReiNX by removing all folders except the Nintendo folder, any of your Switch homebrew applications in the switch folder, and any game mods in the titles folder.

jucaa said:
Ok, so pokémon sword has leaked and it requires fw 7.0 to play.
Im on 8.1 but i got an error when i try to install it.

Invalid NCA (might mean missing sigpatches or a too low firmware)

From what i remember, i have sigpatches from 9.0

Atmosphere is 0.9.3, could be this?

Have you tried using ReiNX?

Teletron1 said:
wanted to update my emmu to 9.4 atmos from 9.3 unpatched 8.0.1, is this a matter of just changing files on the sd card? is it that simple

saw something with nca's and using ChoiDujourNX

ChoiDujourNX is for updating your firmware. Updating your CFW simply involves updating the files on your SD card.

Mouser X · Nov 12, 2019

I'm pretty sure this is the wrong place to actually get the help I need (that'd be a psychiatrist

), but hopefully someone can at least direct me to where I can find more advanced help.

In Dragon Quest Builders 2, in Malhalla (near end-game), there's a place where *everything* goes pitch black. In my game, the effect has been reversed. Instead of this small area going dark, the *regular* map is pitch black. The small area is still dark, but lights up with the headlights (the headlights stop working in the "normal" map areas, and therefore I can't see anything). The problem stays in effect when I load my game. I saved my game before I realised the lighting was broken, so I can't restore from a point before it broke. Any suggestions on how to fix this, or where to go to find people who can help me fix this?

It seems likely I can use a cheat engine to fix this (I suspect it's an environmental effect, and just needs the right variable to be switched back), but I don't know how to use cheat engines, or what to look for.

Any help would be awesome. I've already put 150+ hours in this game, and I *really* don't want to lose all the stuff I've built.

Yoshimaster96 · Nov 12, 2019

My end goal is to dump and decrypt several games I have for use in Yuzu. However, I dunno how to do that. I also want to be able to "unhack" my Switch afterwards (I don't have an NSO subscription yet, but in case I get one).

My Switch was purchased basically right when it came out, so the Recovery Mode trick should work (haven't tested it yet though).

A way to do this would be nice. Also not sure if this should go in the Emulation and Homebrew section or not, so there's that.

AndreGalvez · Nov 12, 2019

Is there a way to use NSP files and don't getting ban by Nintendo?

darkriku2000 · Nov 12, 2019

Mouser X said:
I'm pretty sure this is the wrong place to actually get the help I need (that'd be a psychiatrist ), but hopefully someone can at least direct me to where I can find more advanced help.

In Dragon Quest Builders 2, in Malhalla (near end-game), there's a place where *everything* goes pitch black. In my game, the effect has been reversed. Instead of this small area going dark, the *regular* map is pitch black. The small area is still dark, but lights up with the headlights (the headlights stop working in the "normal" map areas, and therefore I can't see anything). The problem stays in effect when I load my game. I saved my game before I realised the lighting was broken, so I can't restore from a point before it broke. Any suggestions on how to fix this, or where to go to find people who can help me fix this?

It seems likely I can use a cheat engine to fix this (I suspect it's an environmental effect, and just needs the right variable to be switched back), but I don't know how to use cheat engines, or what to look for.

Any help would be awesome. I've already put 150+ hours in this game, and I *really* don't want to lose all the stuff I've built.

Are you running a physical cartridge, the game downloaded from the eshop, or an xci or nsp? If it's an xci or nsp, especially if it's one you downloaded, that might be causing your problem so try a different source if possible. If it's one of the first 2 (official copy) I got nothing sorry. What FW/CFW are you running and do you have anything running in the background?

AndreGalvez said:
Is there a way to use NSP files and don't getting ban by Nintendo?

No. Well more accurately no 100% safe way has been found. If you're running NSPs and going online you'll eventually get banned.

ShinLarc · Nov 12, 2019

trying to install an NSP I made with NCB from an XCI using goldleaf and it says invalid NCA or my firmware is too low.. I cant get this stuff to work.. what am I doing wrong?

KessonD · Nov 12, 2019

Draxzelex said:
While .XCI files are theoretically safer, they can still get you banned and have gotten numerous people banned already. Only ZeroTwoXCI and dOPUS/n1dus support .XCI file installation

CFW

Chainloading means booting one payload from another. Hekate is a payload and has the ability to load other payloads aka chainloading

Depends on what you want

Yes

Thank you!

darkriku2000 · Nov 12, 2019

LoganVirusX said:
trying to install an NSP I made with NCB from an XCI using goldleaf and it says invalid NCA or my firmware is too low.. I cant get this stuff to work.. what am I doing wrong?

What's your current firmware version and what cfw are you using? Also what game?

ShinLarc · Nov 12, 2019

darkriku2000 said:
What's your current firmware version and what cfw are you using? Also what game?

im on 9.0.0 and im working with pokemon sword here... nothing I do lets me be able to install my XCI or NSP..

ShinLarc · Nov 12, 2019

yeah when I DO try and get the XCI or NSP so install it just shows up as a black square with a continuous loading icon.. whats the deal here?

Mouser X · Nov 12, 2019

darkriku2000 said:
Are you running a physical cartridge, the game downloaded from the eshop, or an xci or nsp? If it's an xci or nsp, especially if it's one you downloaded, that might be causing your problem so try a different source if possible. If it's one of the first 2 (official copy) I got nothing sorry. What FW/CFW are you running and do you have anything running in the background?

I'm playing the game from a cartridge, on an unmodified Switch. My OFW version is 9.0.1. My Switch is hackable (I bought it Dec. 2017), and I have used L4T, and Lakka. I used Hekate to create a backup months ago.

Any suggestions on where (or who) else to ask for help? I didn't expect to have a fix here, but was hoping to be directed to where a fix may be found. Thanks for trying though.

AntonyB · Nov 12, 2019

I wam currently on OFW 7.0.1 and AMS 0.9.2, would it be better to update to 9.1 via ChioDuJour and then update Atmosphere also or it's better to stay on a lower firmware?

HoTsHoTz79 · Nov 12, 2019

my question got buried, so asking again

How do I remove emuNAND?

I have a 128GB and after emuNAND setup i dont have enough space... so I want to get rid of it and just have 1 partition.

How can I remove the sysNAND partition and have all my installed apps / albums / saves / etc?

darkriku2000 · Nov 12, 2019

Mouser X said:
I'm playing the game from a cartridge, on an unmodified Switch. My OFW version is 9.0.1. My Switch is hackable (I bought it Dec. 2017), and I have used L4T, and Lakka. I used Hekate to create a backup months ago.

Any suggestions on where (or who) else to ask for help? I didn't expect to have a fix here, but was hoping to be directed to where a fix may be found. Thanks for trying though.

Best ask on a dedicated game forum then I think, maybe the Dragon Quest subreddit or the forums at GameFaqs

MikeyTaylorGaming · Nov 12, 2019

Draxzelex said:
I would recommend doing a fresh installation of ReiNX by removing all folders except the Nintendo folder, any of your Switch homebrew applications in the switch folder, and any game mods in the titles folder.

Is there a quick and easy link to update ReiNX? I always struggle finding the damn files for it.

Also, if they're not allowed to be shared then my apologies!

Joeli53 · Nov 13, 2019

I'm running SX OS 2.9.2 on emuNAND 9.01. I need to get into my 8.1 sysNAND and deregister it as my primary Switch. I suspect I won't be able to access that option unless I update my sysNAND to 9.01. Deregistering online via the website is no longer an option for me. Am I safe to update my sysNAND, do the deregistration, and swap back to my emuNAND forever?

Draxzelex · Nov 13, 2019

Yoshimaster96 said:
My end goal is to dump and decrypt several games I have for use in Yuzu. However, I dunno how to do that. I also want to be able to "unhack" my Switch afterwards (I don't have an NSO subscription yet, but in case I get one).

My Switch was purchased basically right when it came out, so the Recovery Mode trick should work (haven't tested it yet though).

A way to do this would be nice. Also not sure if this should go in the Emulation and Homebrew section or not, so there's that.

That depends on the game and I would feel like it would belong in the ROM Hacking Section. Also, there is technically no way to "unhack" the Switch because CFW is not installed on the console. If you want to make the console "clean" again, you have to restore a clean NAND dump that was made before ever running any CFW or homebrew.

AntonyB said:
I wam currently on OFW 7.0.1 and AMS 0.9.2, would it be better to update to 9.1 via ChioDuJour and then update Atmosphere also or it's better to stay on a lower firmware?

I'd recommend updating to firmware 8.1 than 9.0.1 as not all homebrew applications work properly on firmware 9.X

mikeyt1998 said:
Is there a quick and easy link to update ReiNX? I always struggle finding the damn files for it.

Also, if they're not allowed to be shared then my apologies!

https://reinx.guide/

Joeli53 said:
I'm running SX OS 2.9.2 on emuNAND 9.01. I need to get into my 8.1 sysNAND and deregister it as my primary Switch. I suspect I won't be able to access that option unless I update my sysNAND to 9.01. Deregistering online via the website is no longer an option for me. Am I safe to update my sysNAND, do the deregistration, and swap back to my emuNAND forever?

Why do you want to deregister it as your primary Switch in the first place?

Hacking SWITCH NOOB PARADISE - Ask questions here

YouTube Glitcher

Attachments

Well-Known Member

Space Tech Engineer

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

GIC-Developer

Well-Known Member

YouTube Glitcher

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum