While you cannot check if an update is specifically installed, you can still check if anything pertaining to that game is taking up memory in Data Management.
Hi Guys,
I'm currently still learning about CFW.
I installed atmos 0.9.2 on my 7.01 switch using fusee gelee method sucessfully. However I'm having some issues with some games.
Some of my games can start with no issue, however some games requires me to connect to internet before start. For example: Fifa 19 & MH Gen X.
Is there any way around to play the game without connecting to internet first?
Please kindly help to advise.
Many thanks!!
I'm currently still learning about CFW.
I installed atmos 0.9.2 on my 7.01 switch using fusee gelee method sucessfully. However I'm having some issues with some games.
Some of my games can start with no issue, however some games requires me to connect to internet before start. For example: Fifa 19 & MH Gen X.
Is there any way around to play the game without connecting to internet first?
Please kindly help to advise.
Many thanks!!
Sysnand is the default firmware that every single Switch on the planet uses. It runs from the internal system storage. You can still use this with homebrew if you can inject payloads before the native Switch bios tries to launch the firmware.
Emunand is a copy of the Sysnand and is stored on the SD card, it does the exact same thing as Sysnand except with this option you can keep the sysnand clean so if you want to play online with legit games then you can do that.
What could be my issue if I get this message when trying to play an installed game?
"the software closed because an error occurred"
Only the most recent games ive installed are doing this. They are new games (Untitled Goose Game and Zelda Link's Awakening) so I wasnt sure if maybe something needs to be updated or patched to get them working? Or my SD card is corrupted and wont allow me to install any additional games. All the games already on there still work fine.
Ive tried updating what I can, must be still missing something. Also Ive tried installing the games multiple times. I was using goldtree, but just updated and started using quark. Quark never seems to finish installing any big games properly tho. The progress bar on the switch is at the very end and it just doesnt say complete. On the PC app it says "Goldleaf is reading a file.."
Zelda and has taken over 45min so far. I dont think it should take that long. The goose game sucessfully completed through Quark, but still doesnt work.
Current version: 7.0.1/AMS 0.9.4/S
400GB SanDisk Ultra - fat32 (208GB Free)
Quark v0.2.0
Goldleaf 0.7.3
In windows I can copy over files to the sd card with no errors. I tried copying over a video to see if it would say it couldnt play because it was corrupted or something. It does play without issues.
"the software closed because an error occurred"
Only the most recent games ive installed are doing this. They are new games (Untitled Goose Game and Zelda Link's Awakening) so I wasnt sure if maybe something needs to be updated or patched to get them working? Or my SD card is corrupted and wont allow me to install any additional games. All the games already on there still work fine.
Ive tried updating what I can, must be still missing something. Also Ive tried installing the games multiple times. I was using goldtree, but just updated and started using quark. Quark never seems to finish installing any big games properly tho. The progress bar on the switch is at the very end and it just doesnt say complete. On the PC app it says "Goldleaf is reading a file.."
Zelda and has taken over 45min so far. I dont think it should take that long. The goose game sucessfully completed through Quark, but still doesnt work.
Current version: 7.0.1/AMS 0.9.4/S
400GB SanDisk Ultra - fat32 (208GB Free)
Quark v0.2.0
Goldleaf 0.7.3
In windows I can copy over files to the sd card with no errors. I tried copying over a video to see if it would say it couldnt play because it was corrupted or something. It does play without issues.
Last edited by ThaDraGun,
I am on the latest, same error.
EDIT: i got error "2356-0009" in goldleaf because my NSP files were on "read only" (not sure why). Fix'd now though
Last edited by Qwerty5555,
Yes, it is very similar to Atmosphere; just with different files including the payload.
Have you tried using ReiNX?
Internal memory for emuMMC is whatever you partitioned for emuMMC. You can install whatever you want there.
Boot into Maintenance Mode which you can do by holding volume + and - when turning on the console. If you have AutoRCM, you hold the buttons after sending a payload that loads OFW/CFW.
D
Deleted User
Guest
D
Deleted User
Guest
D
Deleted User
Guest
Is it safe yet to update my FW to 9.0 using SX 2.9.1, or are there still enough bugs that I should stay on FW 8.0? I want to play DQ11 and Ori blind forest which need FW 9.0
Last edited by ,
Anybody have any recent experience with going online with an edited save file for Splatoon 2?
I did it over a year ago and that switch hasn't been banned yet, this was before Atmosphere was released I believe. Booted homebrew on Sysnand, extracted/restored save (Edited the gear specifically) and went online (after restarting and being in airplane mode with telementery blocked for the process.) From looking around the forums it seems others have succeeded in not being banned, but it's a bit outdated.
I did it over a year ago and that switch hasn't been banned yet, this was before Atmosphere was released I believe. Booted homebrew on Sysnand, extracted/restored save (Edited the gear specifically) and went online (after restarting and being in airplane mode with telementery blocked for the process.) From looking around the forums it seems others have succeeded in not being banned, but it's a bit outdated.
Last edited by Chino,
Hi all,
my Switch is running 6.1.0 ReiNX. To inject payload in RCM mode I am still using ReiNX.bin 1.60.
Question: Is it recommended to update anything? Can I simply use the recent ReiNX.bin 2.4 as payload when I need to inject payload?
my Switch is running 6.1.0 ReiNX. To inject payload in RCM mode I am still using ReiNX.bin 1.60.
Question: Is it recommended to update anything? Can I simply use the recent ReiNX.bin 2.4 as payload when I need to inject payload?
So anyone having the issue installing NSP's via the lastest ver of Kosmos using Goldleaf.
**************************
Error: 2145-0001 (0x291)
Module:ETicket (145)
**************************
Here are a few things I did to resolve this,
- I reformatted my SD to Fat32 @ 32kb cluster
- I then put all the Kosmos (v14.2 paradise city) files back onto my SD with the clean format
- Next, I browsed the atmosphere folder for the kip_patches folder and deleted the stock patches it came with and replaced them with the newest Sigpatches I found on the interwebzz
- After that I loaded Atmosphere back up and repeated the original install process where I ran into the Errors of selected nsp and everything worked this time with no issues.
cheers,
Hope this help some
Lpprc
**************************
Error: 2145-0001 (0x291)
Module:ETicket (145)
**************************
Here are a few things I did to resolve this,
- I reformatted my SD to Fat32 @ 32kb cluster
- I then put all the Kosmos (v14.2 paradise city) files back onto my SD with the clean format
- Next, I browsed the atmosphere folder for the kip_patches folder and deleted the stock patches it came with and replaced them with the newest Sigpatches I found on the interwebzz
- After that I loaded Atmosphere back up and repeated the original install process where I ran into the Errors of selected nsp and everything worked this time with no issues.
cheers,
Hope this help some
Lpprc
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
RedColoredStars:
There is an actual trailer with footage too. lol. Going to watch it tonight. Grabbed it from... a place. -
-
@
SylverReZ:
@Psionic Roshambo, JonTron's back yet again until he disappears into the void for another 6 or so months.+1 -
-
-
-
-
-
-
