Hacking Boot straight to rcm after 9.0.0 update

Jak600 · Sep 18, 2019

Hi guys maybe you can shed some light on this issue.

i updated my switch to firmware 9.0.0, through choidujour but know my switch won't boot to the OFW
my switch now loads straight to RCM mode, and atmosphere will not load either what is the best action i can do at this point?

Update:

i can boot to OFW but i am not able to boot to the CFW at the moment
yes i have the latest version of atmosphere
i see the splash screen but no further boot

matt! · Sep 18, 2019

You can skip auto boot by pressing and holiding the minus (-) button on startup.

Jak600 · Sep 18, 2019

the autoboot is off but it's just not booting the Firmware OFW or CFW is nand restore the only option now?

Souperman9 · Sep 18, 2019

ChoidujourNX installs autorcm by default. Iirc you can uninstall it through hekate, and you'll need to use the latest version of atmosphere to boot after.

Jak600 · Sep 18, 2019

i have the latest version of atmosphere and disabled the autorcm (thanks for that i thought i bricked it with that one)
and for some reason it boots normally so i am going to setup my SD card to have all the latest info thanks for the information everyone

Jak600 · Sep 18, 2019

ok so yeah *(really sorry normaly i can figure this out but i am getting blank everytime) i am back i can load the OFW now but the CFW just gives me a blank screen i have the newest atmosphere and with what i know i should use the fusee-primary but
when i put the switch in rcm and use the fusee-primary nothing happens

if i use hekate_ctcaer 5.0.2 i get the gui interface but still can't load atmosphere

what in the world am i missing in this story (besides common knowledge)

Hayato213 · Sep 18, 2019

You used ChoidujourNX to update or the pc version of Choidujour?

Jak600 · Sep 18, 2019

Hayato213 said:
You used ChoidujourNX to update or the pc version of Choidujour?

i used the NX version

Hayato213 · Sep 18, 2019

Jak600 said:
i used the NX version

What happen when you load up fusee-primary from Hekate menu?

Jak600 · Sep 18, 2019

Hayato213 said:
What happen when you load up fusee-primary from Hekate menu?

hold on i haven't tried that yet

--------------------- MERGED ---------------------------

ok that did not do anything but when i use usee-primary with tegra i do see the splash screen of atmosphere so i quess half a step further

Kafluke · Sep 18, 2019

When you updated did you choose exfat option?

Jak600 · Sep 18, 2019

i am not sure anymore

but for update i can boot to OFW but i am not able to boot to the CFW at the moment

Kafluke · Sep 18, 2019

Jak600 said:
i am not sure anymore

but for update i can boot to OFW but i am not able to boot to the CFW at the moment

Perform the update again and choose exfat this time.

Jak600 · Sep 18, 2019

how do i do the update now then? because i only know the option through CFW

Mthodmn101 · Sep 18, 2019

Jak600 said:
how do i do the update now then? because i only know the option through CFW

try and boot using a fat32 sd card

Kafluke · Sep 18, 2019

As stated. Use a different SD card with fat32. Put all your update files and choi on the fat32 card. Boot CFW and do the update but do it with exfat. When done, put your other SD back in and try it.

Jak600 · Sep 18, 2019

Ok thanks I will give that a try I will report back tomorrow

Jak600 · Sep 19, 2019

sorry to ask for help again but i can't figure out how to re-install the 9.0 firmware without CFW

--------------------- MERGED ---------------------------

Kafluke said:
As stated. Use a different SD card with fat32. Put all your update files and choi on the fat32 card. Boot CFW and do the update but do it with exfat. When done, put your other SD back in and try it.

but that is the issue everything works aside from booting to the CFW

Jak600 · Sep 19, 2019

These are the two splash screens that i see after that the screen goes black and will not do anything anymore (except reboot)

Jak600 · Sep 19, 2019

i found the sollution when booted into the OFW my switch was complaining that it could not use the SD card and needed an update
i allowed that update then tried to load the CFW again and that worked i am back in the CFW

how can you close a topic? (if it is possible)

And offcourse thanks a lot for your time and energy

Hacking Boot straight to rcm after 9.0.0 update

Member

Well-Known Member

Member

Well-Known Member

Member

Member

Newcomer

Member

Newcomer

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Member

Member

Attachments

Member

Similar threads

Popular threads in this forum