Hacking Discussion SX OS - Error and Solutions Thread

nantalos · Jun 18, 2019

Ch1llkroete said:
Thank you. Got one more question: should I do anything regarding the fuses? The last update I did was without burning fuses. Is there any reason to apply the update process in a way (is that even possible?) not to burn fuses? Thanks!

I personally never bothered with that so my information could be outdated. But afaik if you want to play legit games online you have to boot normally which will always burn the fuses to match the firmware.
So either you play online or you keep your fuses. At least with sxos.

Atmosphere recently released an update that lets you make an emunand too. I heard of some people making two emunands with it. One for hacking and one of playing online with the latest firmware, all while keeping their sysnand with low firmware + no burned fuses. rn I heard it's still unstable, so you should wait for the fix (which usually comes pretty quick)! Also since it is so new I also would personally wait a bit to see if using it online leads to a ban.

aos10 · Jun 19, 2019

Adr990 said:
I just got a upgraded eMMC memory to 128GB, but that has changed my Console Fingerprint it would seem.
Is there any way to transfer my license or should I just get a new one?

Cheers.

How you did that? Where i can get compatible eMMC?

cagerhager · Jun 22, 2019

I updated SXOS to 2.8 beta that has support for 8.1.0 supposedly, Updated firmware to 8.1.0 and it boots to switch splash, then crashes, any suggestions?

eatmycoconut · Jun 25, 2019

Hello, first timer here, so I have encountered a problem where the update data is not integrating with my xci
in particular the xci i am using is azure striker gunvolt striker pack, so I installed the update via the sx installer and I mount the xci,
in the switch menu it now shows the game with the game card icon and a duplicate with the cloud icon.
Could anybody figure out how to fix this?

I am currently using sx os v2.8 beta
where my emunand is on firmware 8.1.0

edit: Solved! If anyone encounters this problem, it means the xci and update/dlc regions are not the same.

gene0915 · Jul 9, 2019

I switched to SX OS 2.8 Beta and updated my firmware to v8.1.0. Everything was working great...... other than having to reinstall practically all my NSP's (due to some SX OS bug?!) but oh wells. So then, I copied a single, new NSP file to my exFAT SD card and booted SX OS and when I went into the album, my Switched crashed. I forget the error code but after a few attempts and not being able to launch the album (so I can install my new NSP), I went into HBG and while it was scanning the SD card, I got an error about 'Invalid NCA magic'. I removed the newly copied over NSP and then, I was able to get into the album to run homebrew again via SX OS.

I grabbed the NSP from that dark site..... wondering if the dump was bad or is there some weird bug with SX OS 2.8 in conjunction with fw 8.1.0 that is giving that 'invalid NCA magic' error? When I get home, I'm going to grab another random NSP file and see if I can reproduce the problem.

Speaking of problems.... has T-X ever figured out why people like me needed to reinstall pretty much all of our NSPs after updating? I've always installed all of my NSPs with SX OS.

jjjexorcist · Aug 7, 2019

I got error when loaded save or started new game of skyrim with mod with sxos v2.8 beta FW8.1.0.

dcfcblues · Aug 29, 2019

Today I tried to boot into the boot menu (power - vol +) and it just loads straight into the nintendo firmware. It was working fine last time i used it (probably a couple weeks back).
I've tried with dongle (autorcm was on) and dongle + jig and neither works. It always just loads straight into ofw. I've tried a fresh boot.dat and no luck as well. I'm on 8.1.0 (on a non patched switch). Not sure if it makes any difference, but I did have emunand set up (though I appear to be booting into regular nand). Also worth noting that my microsd card is using exFAT. Any ideas what's going on?

pLaYeR^^ · Aug 29, 2019

dcfcblues said:
Today I tried to boot into the boot menu (power - vol +) and it just loads straight into the nintendo firmware. It was working fine last time i used it (probably a couple weeks back).
I've tried with dongle (autorcm was on) and dongle + jig and neither works. It always just loads straight into ofw. I've tried a fresh boot.dat and no luck as well. I'm on 8.1.0 (on a non patched switch). Not sure if it makes any difference, but I did have emunand set up (though I appear to be booting into regular nand). Also worth noting that my microsd card is using exFAT. Any ideas what's going on?

You hold Vol +?

dcfcblues · Aug 29, 2019

pLaYeR^^ said:
You hold Vol +?

Yep holding power + volume up.

dcfcblues · Aug 29, 2019

Seems as though it was related to the card being exFAT and not FAT32. I tried a second SD card, formatted it to fat32 and it worked. Reformatted it to exFAT and it stopped working. Formatted it to fat32 once again and it worked again.

pLaYeR^^ · Aug 29, 2019

dcfcblues said:
Seems as though it was related to the card being exFAT and not FAT32. I tried a second SD card, formatted it to fat32 and it worked. Reformatted it to exFAT and it stopped working. Formatted it to fat32 once again and it worked again.

Maybe you have updated your console with ChoiDujourNX but didn't choose the exFAT option during the installation?

Birasluiz · Oct 18, 2019

Hello guys. Anyone having a problem with nsps files after the last update?
I have 2 nsp files that I just downloaded and I can’t find them on my switch.
I’m doing everything that I usually do. This started after the last update.
Does anyone have any clue on what is happening?
Thank you so much!

CKkio23 · Oct 18, 2019

Birasluiz said:
Hello guys. Anyone having a problem with nsps files after the last update?
I have 2 nsp files that I just downloaded and I can’t find them on my switch.
I’m doing everything that I usually do. This started after the last update.
Does anyone have any clue on what is happening?
Thank you so much!

Is it named weird? maybe rename to something short like if its mario odyssey to marioOD
are you on the latest firmware 9?

Birasluiz · Oct 18, 2019

CKkio23 said:
Is it named weird? maybe rename to something short like if its mario odyssey to marioOD
are you on the latest firmware 9?

The names are exactly like this: Astchain and Dragque.
Yes! Latest firmware for the switch and for SX os

GuyInDogSuit · Nov 3, 2019

My Switch keeps crashing on OFW 9.0.1/SX 2.9.2, no matter what games I play. The length of play time before it crashes varies, but it always inevitably happens. No error code or anything. Just tells me to press the power key to reboot.

GuyInDogSuit · Nov 4, 2019

Does no one check this thread anymore?

isoboy · Nov 4, 2019

I hadn't read the patch notes so I was PLEASANTLY SURPRISED when I was able to reboot straight to SX OS after a crash for the first time and yes....I know this feature probably has existed for a year or more on other solutions.

GuyInDogSuit · Nov 4, 2019

isoboy said:
I hadn't read the patch notes so I was PLEASANTLY SURPRISED when I was able to reboot straight to SX OS after a crash for the first time and yes....I know this feature probably has existed for a year or more on other solutions.

Not that I'm aware of.

isoboy · Nov 4, 2019

GuyInDogSuit said:
Not that I'm aware of.

If you say so, I'm not keeping up with most of this stuff these days actually. I pay attention to new SX releases but that's about it. This error reboot thing is awesome.

MachRc · Nov 12, 2019

Was trying to update to 9.0.1 via choi and got this right before it finished update and now the switch seems loke its soft bricked

How do I go about fixing this?
Cant seem to boot into sx or horizon

Someone mentioned booting into atmos ?

Sent from my SM-G965U using Tapatalk

Hacking Discussion SX OS - Error and Solutions Thread

Have you checked that your SD card Isn't Fake

Yes

No

Will verify soon

Well-Known Member

Yuuki chan

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Member

Doctor Switch

Member

Member

Doctor Switch

Member

Well-Known Member

Member

Your friendly neighborhood guy in a dog suit.

Your friendly neighborhood guy in a dog suit.

Well-Known Member

Your friendly neighborhood guy in a dog suit.

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum