Hi. I have gamepad for GH warriors of rock and it not sync with dongle. When install battery gamepad only blinking led, and no reaction on press ps button. I checked capacitor and all smd components - all ok. May be its dead eeprom. Anyone can dump eeprom from working gamepad? Or maybe has solution?
Hardware Guitar hero WoR gamepad dont sync
- Thread starter SundayWarrior
- Start date
- Views 1,954
- Replies 4
How its will be connected to usb? No pinout for it, only wireless. Usb dongle work fine, but guitarpad only blinking 4 leds and no react for pressing ps buttion.
Ps. I know what sync pad with dongle, but its not work now
Ps. I know what sync pad with dongle, but its not work now
OK, try this
- Connect the wireless dongle to one of the USB ports on the front of your PlayStation 3 system.
- Check your guitar and dongle for a red indicator light. Press the small button on the front of the dongle if there is no light or the light is flashing. If there is a solid light displayed on both you are ready for the next step.
- Press in the PS button on the guitar. The red lights above the strum bar will stop flashing and only one red light will remain illuminated.
- If it is taking longer than a few seconds and the lights are still flashing press the PS button again, you may need to hit the PS button several times.
Guitarpad work not correctly - no reaction to press ps button (i write about it).. or eeprom, or dead 24le1h ic i guess
Similar threads
-
AncientBoi
-
Sicklyboy
-
Sonic Angel Knight
-
Xdqwerty
what are you looking at?
-
-
@
Psionic Roshambo:
Like not emulating the entire SNES but just a loader and the enhancement chips perhaps even slightly overclocked like FX-2 -
-
-
-
-
-
-
@
SylverReZ:
@Psionic Roshambo, The Doom NES cartridges, a few batches were made. One was given to AVGN as seen in his Doom video.+1 -
-
@
Sicklyboy:
I finally modeled and 3d printed the new HDD cages I need in order to build my 2nd NAS. Original ones don't fit the mounting holes on the hdds I'm using. Been sitting on this project for over 2 years smfh
-
-
@
Sicklyboy:
I'm finally gonna get this NAS racked and powered on tonight, install truenas core, and burn the disks in with badblocks
-
@
Sicklyboy:
Also another 70TB going in the front mount drive bays of this server. 182tb raw, going to probably use a zfs RAID-Z3 for 3 parity disks, so 140TB usable
-
@
Sicklyboy:
I could claw back 14tb by only doing 2 parity disks but I feel like with 13 disks in the RAID I'd be kind of pushing my luck on rebuild time if I encounter a disk failure
-
-
-
-
-
-
-
-
-
-
