Hacking Question New(Used) Switch Hacking Question (Noob)

Smoker1 · Jun 29, 2019

OK, so I have a Hackable (NON-Patched) Switch System. I looked at the Serial, and it comes up as not Patched.
It has 7.0.0 Firmware.
Expecting a Jig Tomorrow.

What is the best Method?
Which Method allows for Homebrew and Atmosphere?
Should I Update to 8.1.0 ?
Do I need everything Signed in/Account Setup on the Device?
Will I need at least 1 Game/App Installed?

Cerulis · Jun 29, 2019

I recommend you read the FAQ/Guides first.
https://gbatemp.net/threads/switch-noob-paradise-ask-questions-here.488277/
https://switch.homebrew.guide/

There is no "best method" per say. It's more of a matter of what CFW to pick as the process is more often than not quite streamlined.
With that said: do NOT update yet. You don't want to be burning fuses for free. First thing you should be doing is a NAND backup.
You don't need to sign in nor have a game/app installed.

Edit: Another thing worth noting is that people claim Nintendo can ban you from just booting on a CFW while on sysNAND. So again, BACKUP before anything.
Also only ever update through ChoiDujour, which is a program that allow you to do so without burning fuses, so you can downgrade/restore your NAND afterwards. And of course, only do so after checking if your CFW of choice is compatible with the firmware version.

Smoker1 · Jun 29, 2019

I take it, before I can do ANYTHING, I need to have the Jig to get into RCM, huh?

lemonadess · Jun 29, 2019

You don't even have to buy a jig if you have a spare cable lying around.
I used a cable to get into RCM for the first time, after that I injected Hekate payload and enabled AutoRCM from there.

https://gbatemp.net/threads/can-som...g-apart-the-joycon.501933/page-7#post-7934863

Smoker1 · Jun 29, 2019

So just take a Wire, Secure it to the Screw on the Right Side, then make sure it is contact with the far Right (10) Pin, then hold Vol+and Power to Boot into RCM? If so, damn. Much better method.

The Real Jdbye · Jun 29, 2019

Smoker1 said:
I take it, before I can do ANYTHING, I need to have the Jig to get into RCM, huh?

Unless you want to use a paperclip and risk damaging the pins, yeah.

Smoker1 · Jun 29, 2019

lemonadess said:
You don't even have to buy a jig if you have a spare cable lying around.
I used a cable to get into RCM for the first time, after that I injected Hekate payload and enabled AutoRCM from there.

https://gbatemp.net/threads/can-som...g-apart-the-joycon.501933/page-7#post-7934863

Used a Twist Tie. Kind of a pain to get it right, but it worked. Now, after it is connected and shows up, can I remove the Grounding?

pinbi7 · Jun 29, 2019

Smoker1 said:
Used a Twist Tie. Kind of a pain to get it right, but it worked. Now, after it is connected and shows up, can I remove the Grounding?

auto-rcm now,to make it easyer in the future

Smoker1 · Jun 29, 2019

Well, I have not done anything yet. I got everything on the MicroSD, so everything is ready to go. Now:
When I get the Pin-10 Grounded, I press Vol+ and Power, I connect with the USB Cable, it shows it is Connected and ready to get Exploited, I can then remove the Grounding, or does it have to stay in place through the whole Process?

pinbi7 · Jun 29, 2019

Don't quote me on it but when you are on rcm you should be able to push a payload(hekate)

KrytpicLuck · Jun 29, 2019

Your good to remove the “grounding” or jig once it’s in RCM mode.

lemonadess · Jun 29, 2019

Smoker1 said:
Well, I have not done anything yet. I got everything on the MicroSD, so everything is ready to go. Now:
When I get the Pin-10 Grounded, I press Vol+ and Power, I connect with the USB Cable, it shows it is Connected and ready to get Exploited, I can then remove the Grounding, or does it have to stay in place through the whole Process?

After injecting Hekate Payload:
1. dump your nand and your keys. This will take 1.5hr to finish. Then reboot to RCM
2. inject LockpickRCM payload to dump some master keys to your SD card.
3. Inject hekate again and enable AutoRCM.
4. You can remove your jig at this point.

That's how I did it.

Smoker1 · Jun 29, 2019

Backing up eMMC RAW GPP right now. Took a couple tries to get it, but I am getting the hang of it. Need to get my Magnifier.......if I can find it.

I take it, for Atmosphere, in order to run RetroArch, or any other Homebrew, I need to have a App already Installed, or a Game Card in place, correct?

Cerulis · Jun 29, 2019

Smoker1 said:
Backing up eMMC RAW GPP right now. Took a couple tries to get it, but I am getting the hang of it. Need to get my Magnifier.......if I can find it.

I take it, for Atmosphere, in order to run RetroArch, or any other Homebrew, I need to have a App already Installed, or a Game Card in place, correct?

Either install the .NSP (using an installer, of course) or put the .NRO file in your SD, then it will show up on the Homebrew Menu

Smoker1 · Jun 29, 2019

Not sure why, but I know I have RetroArch and a couple other NRO Files in place. Nothing is on the App Listing Area. Made sure I was in Atmosphere, because in Settings/System, it showed Firmware 7.0.1 (AMS 0.9.1)

Cerulis · Jun 29, 2019

Smoker1 said:
Not sure why, but I know I have RetroArch and a couple other NRO Files in place. Nothing is on the App Listing Area. Made sure I was in Atmosphere, because in Settings/System, it showed Firmware 7.0.1 (AMS 0.9.1)

Ugh, sorry I can't really help you there since I don't use Atmosphere.
Just to make sure, you have them on your SD and is trying to open the HB Launcher through the album?
Have you tried installing any NSPs?

Smoker1 · Jun 29, 2019

Cerulis said:
Ugh, sorry I can't really help you there since I don't use Atmosphere.
Just to make sure, you have them on your SD and is trying to open the HB Launcher through the album?
Have you tried installing any NSPs?

Tried Opening the Album. Only thing in there is a Screen Capture I made earlier of the Device Serial Number. Have not tried Installing any NSPs yet. Currently Backing up things, just in case.

Edit: @Cerulis - Went to SDSetup for getting all the Homebrew and whatnot. Extracted to the Root of the MicroSD, as it stated.

Edit II : Nevermind. Found it. Forgot to hold R when Selecting Album

Smoker1 · Jun 30, 2019

OK, I tested 1 NSP, which Installed Perfectly. But I can not run it. Says to Link a Nintendo Account, but I cant do that, because the DNS Settings are Changed. Also talking about a System Update

Smoker1 · Jun 30, 2019

lemonadess said:
After injecting Hekate Payload:
1. dump your nand and your keys. This will take 1.5hr to finish. Then reboot to RCM
2. inject LockpickRCM payload to dump some master keys to your SD card.
3. Inject hekate again and enable AutoRCM.
4. You can remove your jig at this point.

That's how I did it.

Got it. Much easier now. The Jigs (2 of them) I ordered from, EBay dont work for S### !!!!!!!! So thankfully, the Steps you made work.
However, there are apparently certain Games/Apps that require a Account Linked on your System prior to running. Is there a way to bypass this? Game in Question - Toy Stunt Bike

Cerulis · Jun 30, 2019

Smoker1 said:
Got it. Much easier now. The Jigs (2 of them) I ordered from, EBay dont work for S### !!!!!!!! So thankfully, the Steps you made work.
However, there are apparently certain Games/Apps that require a Account Linked on your System prior to running. Is there a way to bypass this? Game in Question - Toy Stunt Bike

The game needs to be patched to work around the nintendo account bullshit, so try looking for another one.
You can link a fake account too, but not sure if it can be done without connecting to the internet. I saw someone saying they faked the account link itself, but I'm not sure how. Hopefully someone else can clarify it here.

So, did the .nros show up in album?

Hacking Question New(Used) Switch Hacking Question (Noob)

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

*is birb*

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Similar threads

Popular threads in this forum

is birb