L4T Ubuntu - A fully featured linux on your switch

spotanjo3 · Jun 9, 2019

Techjunky90 said:
100% not happening. No source is needed. Anyone with a brain knows wii/GameCube can not be emulated on a 1ghz cpu

Okay.. overclocked is not safe and it will drain the battery faster. Not comfortable with that.

pcwizard7 · Jun 9, 2019

ELY_M said:
I just got a switch with trinket m0 in it off of ebay. It was bricked as in OFW would not ever boot up due to the seller's choi downgrade from 7.0.1 to 5.1
I did testing and stuff. I took my sd card from my other switch and guess what... It did booted up ubuntu nicely.....
actually, It is great tool to rule out any hardware issues.

I reflashed the mod chip then setup autoboot to just boot ubuntu

could you use hekate to bypass the fuse count check then upgrade the fw to match the fuse count? or rebuild the nand?

--------------------- MERGED ---------------------------

VibrantSubbed said:
Hey, heads up... I have an official nintendo 128gb MicroSD and if you try flashing the image it apparently doesn't seem to work. I had to use my old 3DS' 16gb and it worked just fine. If anyone knows why the 128gb doesn't work, please tell me. (The SD is real, not fake)

Nintendo has switch branded sd cards there really re badge scandisk sd card. make sure its fat32 use guiformat32 to format it and try again

bylaws · Jun 9, 2019

azoreseuropa said:
Okay.. overclocked is not safe and it will drain the battery faster. Not comfortable with that.

Oc is totally safe, Nintendo does it itself in botw, it will drain the batter faster, but so will 1ghz

mattyxarope · Jun 9, 2019

Bylaws could you explain how the controllers work once they're both connected - what the device name for them collectively is, for example? I've got this working but can't quite get the controllers to register and I don't have a keyboard to test either.

Vigg · Jun 9, 2019

Mouser X said:
If you have 2 SD cards, and an official Nintendo dock, install L4T to two SD cards. Boot Linux on your Switch, and insert your 2nd SD into a USB SD card reader, and plug that into your dock's USB port. Now install/use gparted on your Switch, to resize/move the ext4 and fat32 partions on your 2nd SD card. This resized SD card will be your full, permanent, L4T + Lakka card (this is how I got Lakka and L4T on the same SD card).

Hey I shrinked the ext4 partition and added a fat32 partition, however hekate will still boot from the 500mb fat partition. When I remove this partition hekate will boot from the fat32 partition so I can select Lakka, but Lakka doesnt boot. Also I can't boot ubuntu when I add it to the bootloader. Just like lakka a black screen. But when I recreate the 500mb Fat partition ubuntu works but lakka wont. Does anyone know how to dualboot ubuntu and lakka?? Because your explenation doesn't work for me or I missed something.

Mouser X · Jun 9, 2019

Vigg said:
Hey I shrinked the ext4 partition and added a fat32 partition, however hekate will still boot from the 500mb fat partition. When I remove this partition hekate will boot from the fat32 partition so I can select Lakka, but Lakka doesnt boot. Also I can't boot ubuntu when I add it to the bootloader. Just like lakka a black screen. But when I recreate the 500mb Fat partition ubuntu works but lakka wont. Does anyone know how to dualboot ubuntu and lakka?? Because your explenation doesn't work for me or I missed something.

Added? You don't need to add a partition. It's already there. Move and resize the ext4 partition to the end of the SD card, and then resize the existing fat32 parition (both Lakka and L4T/Ububtu boot from this fat32 partition, so it must be first) to fill whatever is left after the ext4 partition has been resized and moved. Also, you must be running L4T v1.2 or higher, because bylaws updated L4T to be dual-bootable with Lakka in that version.

WireWool · Jun 9, 2019

Can I later install Kosmos alongside with l4t? Also, can I use a fat32 sd card?

bylaws · Jun 9, 2019

https://photos.app.goo.gl/MKSs3oERVFEW7gwd9

In dock cause broken tc, full GPU accel, BT already works, no audio or WiFi yet, no settings cause I didn't cleanbuild when switching to non ATV (also works).

hippy dave · Jun 9, 2019

bylaws said:
https://photos.app.goo.gl/MKSs3oERVFEW7gwd9

In dock cause broken tc, full GPU accel, BT already works, no audio or WiFi yet, no settings cause I didn't cleanbuild when switching to non ATV (also works).

Exciting!

Rizzorules · Jun 9, 2019

bylaws said:
https://photos.app.goo.gl/MKSs3oERVFEW7gwd9

In dock cause broken tc, full GPU accel, BT already works, no audio or WiFi yet, no settings cause I didn't cleanbuild when switching to non ATV (also works).

This is amazing! Please upload more videos when you have free time, i love seeing your progress

M7L7NK7 · Jun 9, 2019

So fucking hyped

San Andreas!!

Rellik630 · Jun 10, 2019

bylaws said:
In dock cause broken tc, full GPU accel, BT already works, no audio or WiFi yet, no settings cause I didn't cleanbuild when switching to non ATV (also works).

Great news and great work. One step closer to steam streaming. Awesome!

Old-Skool · Jun 10, 2019

So I'm completely new to linux still figuring out the process and for retroarch once it installs how do you open it? Is it a file I'm looking for or something?

parkerlreed · Jun 10, 2019

Guivas73 said:
So I'm completely new to linux still figuring out the process and for retroarch once it installs how do you open it? Is it a file I'm looking for or something?

Run it from the menu or by typing `retoarch` in a terminal.

halcyonknight · Jun 10, 2019

Tried searching to no avail. Got everything running without too much trouble, but for some reason I get some pretty bad screen glitching/flickering while it's in the dock, but switching to 720p fixes it. Any idea why it's happening?

ZeroFX · Jun 10, 2019

halcyonknight said:
Tried searching to no avail. Got everything running without too much trouble, but for some reason I get some pretty bad screen glitching/flickering while it's in the dock, but switching to 720p fixes it. Any idea why it's happening?

i rarely get this in my monitor, i fix by undocking and re docking, but thats only my case, pretty rare.

Gavin_Darkglider · Jun 10, 2019

Just Successfully booted L4T Gentoo for the first time. A few simple fixes, and making sure audio and dock configs are in place, and you guys can have fun with it. That being said, I have not tested vulkan, or openmax yet, but it seems I have the basic nvidia driver working.

ZeroFX · Jun 10, 2019

Gavin_Darkglider said:
Just Successfully booted L4T Gentoo for the first time. A few simple fixes, and making sure audio and dock configs are in place, and you guys can have fun with it. That being said, I have not tested vulkan, or openmax yet, but it seems I have the basic nvidia driver working.

Great, is it another build that you're working or is the one that you released? I've just finished downloading, gonna take a look.

Gavin_Darkglider · Jun 10, 2019

It is my Gentoo L4T build. The one I posted was a linux 5.0 mainline build, with a 32bit chroot, so I could get libwedevine to work with kodi for netflix.

ZeroFX · Jun 10, 2019

Gavin_Darkglider said:
It is my Gentoo L4T build. The one I posted was a linux 5.0 mainline build, with a 32bit chroot, so I could get libwedevine to work with kodi for netflix.

I see, good job!

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

New Member

Well-Known Member

BBMB

"What are you doing?" "Something unexpected."

Well-Known Member

Member

Well-Known Member

Active Member

Member

Attachments

why?

Well-Known Member

why?

Well-Known Member

why?

Similar threads

Popular threads in this forum