Ok guy, remove the driver you tried to install in device manger.
Download and run tegragui
Then install the driver within tegra gui,
then plug in the switch after you rcm it.. (So your screen is black after holding power and volume up ? Indicates rcm mode)
Use short usbc cables, for a better data connection ..( And to avoid errors like you mention),
Try another usbc cable
Also make sure your unit isnt patched, > Click me
as a patched unit wont accept payloads but you should still be able to send them.
Download and run tegragui
Then install the driver within tegra gui,
then plug in the switch after you rcm it.. (So your screen is black after holding power and volume up ? Indicates rcm mode)
Use short usbc cables, for a better data connection ..( And to avoid errors like you mention),
Try another usbc cable
Also make sure your unit isnt patched, > Click me
as a patched unit wont accept payloads but you should still be able to send them.
Last edited by Canna,
- Joined
- Jul 13, 2014
- Messages
- 6,038
- Trophies
- 2
- Age
- 25
- Location
- https://gs2012.xyz
- Website
- gs2012.xyz
- XP
- 5,989
- Country
Well, RCM is an intended feature, it just happened to have a fatal security flaw.
Welp I got a new cable and that still hasn't helped at all. Still able to boot into RCM and I even ordered a jig to make sure that I wasn't doing something wrong there. If anyone could screen share with me or something and show me if I am doing something wrong or what that'd help me a lot.
Edit: Whenever I try to install driver on TegraRCM it is not graying out the install driver at all. I am able to do it over and over and over again and it won't grey out at all.
Edit: Whenever I try to install driver on TegraRCM it is not graying out the install driver at all. I am able to do it over and over and over again and it won't grey out at all.
Last edited by Cellulose,
I'm Having the same issue. I was using NXloader from my cellphone without problems.
But i had to connect my NSW in my pc usb port and bam, unknown device. Went back to connect nsw to cellphone, not working anymore
changed 3 different cables, and nothing. Changed computer, and i could install Usb drivers, and TegraRCM was ok, my pc recognized TWICE, but i couldn't inject payloads, or enter sdcard browsing mode.
As of now i can't connect to pc anymore, I'm pretty sure my usb fucked up...
Is there any way i can push the payload now ?
But i had to connect my NSW in my pc usb port and bam, unknown device. Went back to connect nsw to cellphone, not working anymore
changed 3 different cables, and nothing. Changed computer, and i could install Usb drivers, and TegraRCM was ok, my pc recognized TWICE, but i couldn't inject payloads, or enter sdcard browsing mode.
As of now i can't connect to pc anymore, I'm pretty sure my usb fucked up...
Is there any way i can push the payload now ?
I was never able to get a USB-C to USB-C cable to work when injecting my payloads, I had to use a USB-A to USB-C payload, but that could just be my computers configuration. Is it possible to try a different PC?
Any solutions to the issues
--------------------- MERGED ---------------------------
Did you end up fixing your switch if you did what did you do I’m having the same issue
--------------------- MERGED ---------------------------
Did you end up fixing your switch if you did what did you do I’m having the same issue
Similar threads
-
- Article
-
BakerMan
The snack that smiles back, Ballsack! -
K3Nv2
-
The Real Jdbye
*is birb* -
Psionic Roshambo
-
HiradeGirl
-
SwordShielder
-
Xdqwerty
what are you looking at?
-
-
@
K3Nv2:
I'd like to see a DS emulator that allows casting top screen to TV then use bottom for the touch screen stuff+1
-
-
-
@K3Nv2 I did that using Citra for 3DS games. Bottom screen was my smartphone. Until I got the touch screen.
-
-
-
-
@
Psionic Roshambo:
Ken I have that sort of set up on Drastic on Pi for games that don't require touch
-
-
-
Any TV with your PC connected with Citra and any smartphone to use as a screen using a free play store app.+1
-
-
-
-
-
-
-
-
-
-
-
-
-