L4T Ubuntu - A fully featured linux on your switch

pescu · May 17, 2019

pietempgba said:
I figured out a way to dual boot horizon os and Ubuntu. You can flash the SD image and copy the 1.2 files over then you can move the second partition down and resize it up then you can resize the 1st partition and it can be used with the switch and you can copy all your switch files over. You can only really do this with gparted so you'll have to setup a vm, install it or use another different way of doing it

i did that from the first day, but i used Aomei

DiscostewSM · May 17, 2019

bylaws said:
its complicated, its encrypted

Could there be anything to help with that, like homebrew to extract/decrypt the data?

galaxior · May 17, 2019

Just got this setup, amazing work!

For some reason when I enlarged my FAT32 partition and moved my ext4 partition to the end through gparted it resulted in Hekate not being able to find my FAT partition (NOFAT error), can't say why as all other devices could read it fine. Regardless if anyone is faced with the same issue I solved it by just copying the files off the FAT partition, reformatting it to FAT32 again and then copying the files back, then it could boot without issue

pescu · May 17, 2019

galaxior said:
Just got this setup, amazing work!

For some reason when I enlarged my FAT32 partition and moved my ext4 partition to the end through gparted it resulted in Hekate not being able to find my FAT partition (NOFAT error), can't say why as all other devices could read it fine. Regardless if anyone is faced with the same issue I solved it by just copying the files off the FAT partition, reformatting it to FAT32 again and then copying the files back, then it could boot without issue

the fat32 partition needs to be the first partiton

galaxior · May 17, 2019

pescu said:
the fat32 partition needs to be the first partiton

It was still my first partition, I just moved the ext4 partition to the end of the disk (and expanded it a bit) and then resized the fat32 partition to fill the remaining space. Can't explain why the error occurred but the fix was straightforward at least

Sent from my BLA-L09 using Tapatalk

Yo_Homie · May 17, 2019

galaxior said:
It was still my first partition, I just moved the ext4 partition to the end of the disk (and expanded it a bit) and then resized the fat32 partition to fill the remaining space. Can't explain why the error occurred but the fix was straightforward at least

Sent from my BLA-L09 using Tapatalk

Is the fat32 partition still primary?

Edit:Nvm, I’m an idiot.

bylaws · May 17, 2019

Techjunky90 said:
Not true. LCD screens do burn in. Image persistence is a type of burn in that is not supposed to be permanent but I've personally experienced real burn in on an LCD and know a couple of people that have had the same issue.

--------------------- MERGED ---------------------------

Or you could get a Bluetooth keyboard and mouse

I was correct, lcds dont burn in, burn in is a totally different things to image persistence. image persistence is ALWAYS reversible by just turning off your screen for a few days and can NOT be caused by drivers.

trohn_javolta · May 17, 2019

galaxior said:
It was still my first partition, I just moved the ext4 partition to the end of the disk (and expanded it a bit) and then resized the fat32 partition to fill the remaining space. Can't explain why the error occurred but the fix was straightforward at least

Sent from my BLA-L09 using Tapatalk

Wrote the same few pages back, was the same for me. Formatting fat32 partition solved it.

--------------------- MERGED ---------------------------

For anyone that may be interested: I can confirm that innoaura usb c hub/dock works in l4t ubuntu, however melopow m002 (style) usb c hub/dock does not work.
+ the usual yada yada about you shouldn't use 3rd party docks/hubs only original nintendo dock..

silver95 · May 18, 2019

is it normal to freeze the touch? the only thing that can be done is to restart.

pietempgba · May 18, 2019

silver95 said:
is it normal to freeze the touch? the only thing that can be done is to restart.

it's normal it can't be fixed atm

lr98d · May 18, 2019

trohn_javolta said:
For anyone that may be interested: I can confirm that innoaura usb c hub/dock works in l4t ubuntu

Did you manage to get HDMI out to work? I also have the innoaura and I‘m pretty happy with it. Everything works with Horizon, but with L4T HDMI didn‘t work. Did you try Ethernet?

Waip · May 18, 2019

Sorry if it's a completely retarded question but... Does this run retroarch as good as L4T Lakka ?

Csmrcc · May 18, 2019

Waip said:
Sorry if it's a completely retarded question but... Does this run retroarch as good as L4T Lakka ?

for now i think here is more advanced, as uses some updated cores that lakka doesnt, but more or less

Waip · May 18, 2019

Are there any particular recommendations on how to shutdown / reboot from it ? Risks of sd corruption maybe ? How does it behave with autoRCM on shutdown ?

Ninn · May 18, 2019

Shut it down from the Menu, once the screen goes black, hold the power buttong for 12 sec to shut it down.

You can also use hekate and shut it down from there.

uyjulian · May 18, 2019

silver95 said:
is it normal to freeze the touch? the only thing that can be done is to restart.

try pressing the Windows key on the attached keyboard

silver95 · May 18, 2019

uyjulian said:
try pressing the Windows key on the attached keyboard

I do not use physical keyboard. I use the digital keyboard and it does not have the windows key.

Shadow_The_Hedgehog82 · May 19, 2019

is there any way to calibrate the touchscreen? my clicks end up like 2cm to the right and around 3cm up from where I press on the screen. It worked fine on natinsulas linux builds previously

pietempgba · May 19, 2019

Shadow_The_Hedgehog82 said:
is there any way to calibrate the touchscreen? my clicks end up like 2cm to the right and around 3cm up from where I press on the screen. It worked fine on natinsulas linux builds previously

I think it's only a issue with using other desktop environments than unity and gnome. he has a fix if you search around but it breaks touch on the login screen

ShinkoNet · May 19, 2019

So, with 1.2 update, arm64 anbox is working? Or does more stuff need to be done?

Member

Well-Known Member

Member

Member

Member

Member

Well-Known Member

Active Member

Active Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Homebrewer

Active Member

Well-Known Member

Well-Known Member

Obsessed with Touhou

Similar threads

Popular threads in this forum