Hacking How do I homebrew Xbox 360 S without smoldering?

tEMlikeDSandWii · May 6, 2019

I recently realized, hey no one using an Xbox 360, so why don’t I homebrew it. I was searching it up and most methods require smoldering chips to the motherboard and I have no smoldering experience. So, I was wonder how I could do it without smoldering.

H1B1Esquire · May 6, 2019

I think DinohScene wrote a guide.

I'm pretty sure there are prerequisites, like the model/chip, etc,.

tEMlikeDSandWii · May 6, 2019

H1B1Esquire said:
I think DinohScene wrote a guide.

I'm pretty sure there are prerequisites, like the model/chip, etc,.

I can’t really get ahold of any adapters for flashing the disc drive

Deleted User · May 6, 2019

tEMlikeDSandWii said:
I can’t really get ahold of any adapters for flashing the disc drive

Hombrew you will need a modchip - There aren't any softmods for XBox 360

You can flash some drives with a computer and some drives require hardware as well

Looking at your pictures you have a trinity or corona motherboard

Hombrew - RGH is needed for that model and you need a nand reader on top of modchip to glitch console

DinohScene · May 6, 2019

You'll need to solder if you want homebrew and backups.
Disc backups can be ran on an Xkey, depending on your 360, you might need to solder.

tEMlikeDSandWii · May 6, 2019

ModderFokker619 said:
Hombrew you will need a modchip - There aren't any softmods for XBox 360

You can flash some drives with a computer and some drives require hardware as well

Looking at your pictures you have a trinity or corona motherboard

Hombrew - RGH is needed for that model and you need a nand reader on top of modchip to glitch console

Do you know where to find them?

Deleted member 668561 · May 6, 2019

There is NO way to run Homebrew without soldering, I'm surprised after 10 years and from every thread has from here to se7ensins said this and no you cannot downgrade either, flashing the drive only allows burnt DVD copies to play, kk exploit will not work (jtag), and you will have to solder a cpld for Rgh to run homebrew, there is NO SOFTMOD/SOFTWARE only solution to run hombrew, this isn't a Wii, Microsoft spends alot more money to develop these consoles (Wii cost only 250 at launch, while 360 cost 400 (it actually cost more as Microsoft sold them as a loss so they can get boxes out the door, because they can sell you live and new games to make up cost) this price difference shows in drm/security)

https://ebay.to/2vFLfbM = Cpld for rgh

https://bit.ly/2LlVPzs = S-rgh method (muffin rgh works well too if you have a trinity)

ps, i all i can tell from mobo is that is doesn't have the 4gb nand daughter board for internal storage/4gb memory unit as both trinities i own do, does it say 12vdc 10.83a (trinity) or 12vdc 9.86A (corona)

Deleted User · May 6, 2019

tEMlikeDSandWii said:
Do you know where to find them?

I use nand-x /jr programmer to read nand

For 4gb Corona you can get a r/w kit or make a homemade reader

Ace360 v3 chips are the business, stay away from newer v4.xx and v5s as they can be hit or miss

cool runners and matrix chips are also good on certain mobos

Ebay has modchips - Google for jr programmer or equivalent

Done thousands of jtag/rgh/flash over the years

Hacking How do I homebrew Xbox 360 S without smoldering?

Member

RxTools, the ultimate CFW machine.

Member

Deleted User

Guest

Gay twink catboy

Member

GBAtemp Official Psychonaut

Deleted User

Guest

Similar threads

Popular threads in this forum