Yes...m92t36 ic is Ok...I think i have to change P13USBhi! did you change m92t36 ic chip?
Have you already checked volts in pin 5 in m92t36 ic chip?
Yes...m92t36 ic is Ok...I think i have to change P13USBhi! did you change m92t36 ic chip?
Have you already checked volts in pin 5 in m92t36 ic chip?
Thanks, I am not from USA and Europe, and I dont have 3 or 6v in M92T36.if you have 3 or 6v in M92T36 and you are sure new battery was charged, it s P13USB like me.
The problem arrive with a defect original charger ( in my case ), the USB C connector was twisted or Third party charger
If you want i replace the chip
Check with charger plugged in.Thanks, I am not from USA and Europe, and I dont have 3 or 6v in M92T36.
I have already cheked with original nintendo charger plug and dont received 3-6 volts.Check with charger plugged in.
Ok next thing to check is battery voltage.I have already cheked with original nintendo charger plug and dont received 3-6 volts.
Charging a Switch is very much like making love to a beautiful woman - Swiss Toni
Ok next thing to check is battery voltage.
Plugged in and unplugged.
ok. plug and unplug battery I got 3.73v with the console off and 3.61v with the console on.
Now check pin 6 of M92T36. Should be 3.3v when power pressed. If not, M92T36 dead.
It's probably shorted and shorting the whole 3v rail. Disconnect pin 6 then see if you get 3v on the board side. If you do, then m92t36 100% dead.thanks! maybe I need to change M92T36 because pin 6 does not received any volt.
It's probably shorted and shorting the whole 3v rail. Disconnect pin 6 then see if you get 3v on the board side. If you do, then m92t36 100% dead.
Hi
I am in a similar position as the op,
I have a short on the 3V rail, how can i disconnect pin 6 of the M92T36 is it a case of removing the whole chip?
Is pin 6 an input to the M92T36?
Pin 6 is 3v3. Not 5v as in 92A30