- Thread starter MatinatorX
- Start date
- Views 345,074
- Replies 1,396
- Likes 177
- Status
There's a Discord server where he posts regular updates, the invite is posted here from time to time. It is not finished yet, but he's very close to finishing the ones he intends to send to testers, and soon after that he'll make it available for the rest of us to buy
Very great project and the pcb‘s looks good 
I‘m really looking forware to the response of the beta-Testers (read it to late otherwise i would have applied to be a tester ).
One question: When it‘s finished could you please release the file with the psb design and the files for a 3D Printer so i can print my own shell? Because then i could make my own PCB and shell (have access to all which is needed to make own pcb‘s. Would be really great! If you don‘t want to publish it for all users it would be great if you could send it to me via PN
I‘m really looking forware to the response of the beta-Testers (read it to late otherwise i would have applied to be a tester ).One question: When it‘s finished could you please release the file with the psb design and the files for a 3D Printer so i can print my own shell? Because then i could make my own PCB and shell (have access to all which is needed to make own pcb‘s. Would be really great! If you don‘t want to publish it for all users it would be great if you could send it to me via PN
This was just brought to my attention.
How far into development is it?
Also, is there a video of it working already, or is that still soon to come?
How far into development is it?
Also, is there a video of it working already, or is that still soon to come?
...join the discord... should be released soon™
It has taken a lot longer than I think the OP expected, but he's doing an absolutely amazing job in my opinion and I can't wait to see the final result! I look forward to ordering one as soon as they're available.
Hey everyone!
Sorry for the lack of updates again, been busy busy busy with work and the holidays.
I'll post a big update soon with more details, but for now, please enjoy this video of the first ever 100% working DragonInjector prototype.
What does this mean?
- No more worries about project completion. (Yay!)
- No more revisions. (Double yay!)
- Tester units shipped before the end of the month. (All of the yays!)
Some quick notes for those who don't follow the Discord:
- The DI will be offered in Black and Translucent Green at launch.
- The DI will be offered with a choice of two supported firmwares:
- - - - Mattytrog's excellent ATSAMD21 firmware which makes use of the buttons for payload selection.
- - - - Guillem96's excellent ArgonNX firmware which launches a fancy touch GUI on the Switch for selecting your payload.
- The design of the RCM jig has been updated slightly to make it safer to use, with a little bump to keep it in place better. (See renders below!)
Thanks so much everyone for all of your support! This week I will be ordering the stickers, cases and art inserts. If you'd like more granular updates, be sure so join the Discord and say hi!
We're almost there!
--------------------- MERGED ---------------------------
Since this is an open source project (CC BY-SA 4.0) upon completion all source files will be released on my github for free, including the Gerbers, BOM, firmware forks and .STEP files of the case.
Sorry for the lack of updates again, been busy busy busy with work and the holidays.
I'll post a big update soon with more details, but for now, please enjoy this video of the first ever 100% working DragonInjector prototype.
What does this mean?
- No more worries about project completion. (Yay!)
- No more revisions. (Double yay!)
- Tester units shipped before the end of the month. (All of the yays!)
Some quick notes for those who don't follow the Discord:
- The DI will be offered in Black and Translucent Green at launch.
- The DI will be offered with a choice of two supported firmwares:
- - - - Mattytrog's excellent ATSAMD21 firmware which makes use of the buttons for payload selection.
- - - - Guillem96's excellent ArgonNX firmware which launches a fancy touch GUI on the Switch for selecting your payload.
- The design of the RCM jig has been updated slightly to make it safer to use, with a little bump to keep it in place better. (See renders below!)
Thanks so much everyone for all of your support! This week I will be ordering the stickers, cases and art inserts. If you'd like more granular updates, be sure so join the Discord and say hi!
We're almost there!
--------------------- MERGED ---------------------------
Very great project and the pcb‘s looks good
One question: When it‘s finished could you please release the file with the psb design and the files for a 3D Printer so i can print my own shell? Because then i could make my own PCB and shell (have access to all which is needed to make own pcb‘s. Would be really great! If you don‘t want to publish it for all users it would be great if you could send it to me via PN
Since this is an open source project (CC BY-SA 4.0) upon completion all source files will be released on my github for free, including the Gerbers, BOM, firmware forks and .STEP files of the case.
Last edited by MatinatorX,
- Joined
- May 29, 2016
- Messages
- 1,511
- Trophies
- 0
- Age
- 29
- Location
- Madrid
- Website
- manuelrodriguezmatesanz.com
- XP
- 2,791
- Country
Hey everyone!
Sorry for the lack of updates again, been busy busy busy with work and the holidays.
I'll post a big update soon with more details, but for now, please enjoy this video of the first ever 100% working DragonInjector prototype.
What does this mean?
- No more worries about project completion. (Yay!)
- No more revisions. (Double yay!)
- Tester units shipped before the end of the month. (All of the yays!)
Some quick notes for those who don't follow the Discord:
- The DI will be offered in Black and Translucent Green at launch.
- The DI will be offered with a choice of two supported firmwares:
- - - - Mattytrog's excellent ATSAMD21 firmware which makes use of the buttons for payload selection.
- - - - Guillem96's excellent ArgonNX firmware which launches a fancy touch GUI on the Switch for selecting your payload.
- The design of the RCM jig has been updated slightly to make it safer to use, with a little bump to keep it in place better. (See renders below!)
Thanks so much everyone for all of your support! This week I will be ordering the stickers, cases and art inserts. If you'd like more granular updates, be sure so join the Discord and say hi!
We're almost there!
View attachment 155603 View attachment 155604 View attachment 155605
--------------------- MERGED ---------------------------
Since this is an open source project (CC BY-SA 4.0) upon completion all source files will be released on my github for free, including the Gerbers, BOM, firmware forks and .STEP files of the case.
Ohhhh dude, freaking nice. When will be able to buy one approx?
D
Deleted User
Guest
early feb from what was said in discord earlier today
--------------------- MERGED ---------------------------
Livestream Testing Dragon Injector Count
LIVESTREAM
- Joined
- May 29, 2016
- Messages
- 1,511
- Trophies
- 0
- Age
- 29
- Location
- Madrid
- Website
- manuelrodriguezmatesanz.com
- XP
- 2,791
- Country
Awesome. I’ll buy one for sure
--------------------- MERGED ---------------------------
As you can see a few comments above, yes
- Status
-
The Real Jdbye
*is birb*
-
-
-
-
@
Psionic Roshambo:
Ken I have that sort of set up on Drastic on Pi for games that don't require touch -
-
-
@ HiradeGirl:
Any TV with your PC connected with Citra and any smartphone to use as a screen using a free play store app.+1 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
