sorry my pc is lagging and It didn't tell me it had posted. I didn't think it worked so I sent another. whoops
It is fine, just keep it in mind for the future that double post or triple post will be removed from public view.
sorry my pc is lagging and It didn't tell me it had posted. I didn't think it worked so I sent another. whoops
There is an update for the cartridge slot on firmware 4.0 that, once applied, renders it unusable on firmwares below 4.0. This is in case you ever downgrade to a firmware below 4.0 and want to either play your retail cartridges or utilize an exploit that revolves around your cartridge slot. Currently, there is no way to reverse it.
There is no evidence they support this patch.
Yes, you can and will get banned.
If I have burned fuses and can't go to such low firmware versions without AutoRCM, it doesn't matter if I update my cartridge slot, right?There is an update for the cartridge slot on firmware 4.0 that, once applied, renders it unusable on firmwares below 4.0. This is in case you ever downgrade to a firmware below 4.0 and want to either play your retail cartridges or utilize an exploit that revolves around your cartridge slot. Currently, there is no way to reverse it.
Well there's no evidence that its supported or not supported. Supposedly its applied if you never insert a retail cartridge while running a firmware of 4.0 or higher but it hasn't been tested or documented anywhere within SX OS' changelogs.so im on a fw lower than 4 so this means if i restore my clean nand backup my game slot wont work?
Haven't even touched Goldleaf and still use Tinfoil but since they accomplish the same job, I can assume their error codes are shared as well. That particular indicates your firmware is not high to install whatever you want to install based on this thread.
Yes to the first question and its purely hypothetical.If I have burned fuses and can't go to such low firmware versions without AutoRCM, it doesn't matter if I update my cartridge slot, right?
And has a cartridge slot exploit been discovered or is it hypothetical?
Its just a homebrew application. Plus ChoiDujourNX guides you through most of the steps with its interface. But a simple guide is that you download ChoiDujourNX, download the firmware files elsewhere (cough xbins cough), launch it, navigate to the firmware files you downloaded then placed on your SD card, and press Choose in the bottom right. Everything after this is super self-explanatory.Thanks for linking the thread
Is there a safe guide to use to install the new firmware + autorcm with choidujournx, other than youtube videos and the main page at: https://gbatemp.net/threads/choiduj...ller-homebrew-for-the-nintendo-switch.513416/
Or has one not been made yet? Im just a bit worried about doing something wrong, is it really a simple process?
Thanks again btw
Yes to the first question and its purely hypothetical.
Its just a homebrew application. Plus ChoiDujourNX guides you through most of the steps with its interface. But a simple guide is that you download ChoiDujourNX, download the firmware files elsewhere (cough xbins cough), launch it, navigate to the firmware files you downloaded then placed on your SD card, and press Choose in the bottom right. Everything after this is super self-explanatory.
6.2 support came kinda late for CFW, but all of them now support as long as you're using the latest version. For ReiNX, its version 2.0 which you can download straight from the GitHub page or the guide.Alright , sounds good, im looking into it
Is there anyway to check if ReinX is supported with with the latest versions? I want to get to 6.2.0 and I heard SX Os only has support for 6.1.0, as a Reinx user is there a way to check this or are all supported for ReinX?
6.2 support came kinda late for CFW, but all of them now support as long as you're using the latest version. For ReiNX, its version 2.0 which you can download straight from the GitHub page or the guide.
Cause of this is due to an outdated ReiNX.bin either on the SD card, being sent as a payload, or both. The simplest solution is just delete any ReiNX.bin on your SD card and just send 2.0. Oh and you can just hold the power button to exit that screen; it just means it failed to launch the CFW.I have currently updated to v6.2 and when I run Reinx 2.0 I get:
"Package2, magic invalid" - i haven't bricked my switch have I
Cause of this is due to an outdated ReiNX.bin either on the SD card, being sent as a payload, or both. The simplest solution is just delete any ReiNX.bin on your SD card and just send 2.0. Oh and you can just hold the power button to exit that screen; it just means it failed to launch the CFW.
ReiNX.bin is usually on the root not in the ReiNX folder so you may have missed it there. If not, you can try a clean installation meaning starting from scratch, except for maybe the Nintendo folder especially if you've installed games to the SD card.Damn, I checked that i sent a reinx 2.0 bin and replaced all the necesscary reinx files in the reinx folder on my sd card, this is odd... the version I updated to is v6.2 -1.0 if that makes any difference
ReiNX.bin is usually on the root not in the ReiNX folder so you may have missed it there. If not, you can try a clean installation meaning starting from scratch, except for maybe the Nintendo folder especially if you've installed games to the SD card.
can somebody tell me how to shut down sxos with autorcm completely?
first i have to shutdown the switch ordinary an then insert the jig after 15seconds - is that right or do i have to boot sx via +button and power button and then select shut down
Look like you got a $300 dollars paperweight, if you don't have a working NAND backup, backing up the nand after it brick is pointless, as for following youtube video that is a stupid idea, a lot of people follow sthetix video and end up with some stupid error, happens a lot with his switch and 3ds video, just don't recommend his videos even though I followed one of his tutorial before for the ESP8266.