Hacking RELEASE [Official] ReiNX thread [DEAD]

Status
Not open for further replies.

tiliarou

Well-Known Member
Member
Joined
Feb 4, 2018
Messages
163
Trophies
0
XP
592
Country
France
Done. Still the same. NSP files I've downloaded and installed in the past are still working too, so I know the CFW is working, it just won't let me into the hbmenu via albums on ReiNX.
Did you check the archive bit on your folders on the SD card ?
Are you SURE you replaced all the reinx files ? You didn't leave any old trace of it on the SD ? Are you sure you are using the latest payload ? Does it says Reinx version in the System settings ?
 
  • Like
Reactions: Mike83

Mike83

Well-Known Member
Member
Joined
Jul 8, 2006
Messages
150
Trophies
1
Age
40
Location
St. Helens, England
Website
gardensoccer.com
XP
634
Country
United Kingdom
Whats the archive bit?

I'll remove the ReiNX folder and the Reinx.bin now, and start it up with RajNX. Then add the 6.2 ReiNx files back on and see if it helps.

It does say Reinx version in system settings and I'm using the payload with the 6.2build yeah.

EDIT: Removed all ReiNX stuff from the card, added it back and it's the same. :(
 
Last edited by Mike83,

fire888

Member
Newcomer
Joined
Jul 4, 2016
Messages
16
Trophies
0
Age
44
XP
62
Country
Indonesia
HELP !!!
I was trying to play my switch on the dock, but when I select the game, the switch just hangs.
so I powered it off, then I change the microsd (I used 3 microsd because of so many games that I installed, and I think because the switch has to be turned off, then I might as well change the microsd to play other games).
when I inject the payload (I'm using r4 dongle), it blank for a while and then show the red writing : "failed to init sdcard".
I tried all 3 of my microsd, and all the same.

the microsd can be read on pc, and if I reboot to ofw, the switch can read it too.
my switch fw still 5.1.0 (I make sure of it when I reboot to ofw)
so, what should I do ?
 
Last edited by fire888,

gavinfriday

New Member
Newbie
Joined
Dec 5, 2018
Messages
4
Trophies
0
Age
56
XP
66
Country
Belgium
Hello.
I'm am completely new to all of this.
And after a long search I found a switch that is compatible to work wit CFW.
I was reading so many posts before starting to try to get this CFW working.
First, I had all my hopes for the Xecuter pro tool... it seemed so easy to do. Until I read that in the meantime there was a 6.2 update.. and until now the xecuter team did not come up with a solution for it.
For somebody with no experience.. the Xecuter way is the most easiest one. Also it works straight with XCI files.

Afterward I heard of reiNX...So I tried to find my way through the installation procesdure for ReiNX. But I have a few questions with that, as it seems more complicated

1) it says somewhere that they found a way to solve the 6.2 update.. but the link on their official guide is not to this 6.2 cfw file. Somehow you need to find it through another link. So I was wondering if it's 'real'.. because they do not use that link or claim that they have found a way.

2) While preparing the new SD card... I noticed a difference between the ReiNX map file structure from the previous ReiNX zip file.. and the new map structure in the 6.2 zip file. It has much less submaps in it. Do I need the new directory or do I need to overwrite/ add the new files?

3) Now I have on the SD card 1 nro file and 3 maps :
root =
file: hbmenu.nro+
rootmap SWITCH (inside = reinx_toolkit.nro) +
rootmap ReiNX (inside mapt titles. with submap 100D) +
rootmap tinfoil (with submap nsp)

Can you help me out and guide me in the right direction.. and sorry if I am asking silly questions
 

regnad

Button Masher
Member
Joined
May 19, 2008
Messages
2,512
Trophies
1
Age
53
XP
3,649
Country
Japan
Fixed it. Such a fool!

I somehow deleted the titles folder and thus the 010000000000100D folder. Added them back and it's set.

I did this exact same thing! Someone on Discord helpfully asked if I forgot the titles folder.
 

arianadark

Well-Known Member
Member
Joined
Nov 20, 2016
Messages
724
Trophies
0
Age
46
XP
1,825
Country
United States
HELP !!!
I was trying to play my switch on the dock, but when I select the game, the switch just hangs.
so I powered it off, then I change the microsd (I used 3 microsd because of so many games that I installed, and I think because the switch has to be turned off, then I might as well change the microsd to play other games).
when I inject the payload (I'm using r4 dongle), it blank for a while and then show the red writing : "failed to init sdcard".
I tried all 3 of my microsd, and all the same.

the microsd can be read on pc, and if I reboot to ofw, the switch can read it too.
my switch fw still 5.1.0 (I make sure of it when I reboot to ofw)
so, what should I do ?
did you remember to update your dongle?
 

fire888

Member
Newcomer
Joined
Jul 4, 2016
Messages
16
Trophies
0
Age
44
XP
62
Country
Indonesia
did you remember to update your dongle?
I did
I even tried to ask my friend to replace the sd slot and it didnt help.
I have to push the card and sometime (like about once in an hour - I mean tens of tries and in an hour I might succeed once).. I would succeed.. and cfw would load. after getting in game, all fine, until I turn it off again and have to reboot.. and this thing happened again.. really2 stressful.
 
Last edited by fire888,

subcon959

@!#?@!
Member
Joined
Dec 24, 2008
Messages
5,830
Trophies
4
XP
10,036
Country
United Kingdom
Release 2.0

  • Full 6.2 support
  • warmboot w/ sig checks disabled
  • partial implemented services tx, ldr:cht, usbfs
  • Recovery chainload
  • landscape gfx
  • all kips active by default (required)
  • lots of stability updates (TM)
 
  • Like
Reactions: peteruk

KTroopA

Well-Known Member
Member
Joined
Mar 15, 2007
Messages
591
Trophies
0
XP
940
Country
Release 2.0

  • Full 6.2 support
  • warmboot w/ sig checks disabled
  • partial implemented services tx, ldr:cht, usbfs
  • Recovery chainload
  • landscape gfx
  • all kips active by default (required)
  • lots of stability updates (TM)

I got this running ok but am trying to use the latest version of tin foil found here

https://github.com/digableinc/tinfoil/releases

everytime I run v0.99 i get the black screen and the switch crashes. im on 5.1.0. Does ReiNX support this version of tin foil? I prefer it due to the better GUI.
 

sj33

Well-Known Member
Member
Joined
Oct 22, 2013
Messages
4,072
Trophies
2
XP
4,723
Country
Japan
Until XorTroll has pushed the latest changes, it is actually still recommended to use the latest Adubbz version.
 

gt10

Active Member
Newcomer
Joined
Oct 2, 2016
Messages
32
Trophies
0
XP
116
Country
Fiji
i upgraded from v1.7.1 to v2.0 with the help and downloads from the reinx guide website.
it seems to work.
i didnt test tinfoil, because my sd card is full.
but i have a problem with the homebrew launcher ignoring the keycombo.
no matter what combo i set, it always launches homebrew menu.
so i am not able to access the album to see my screenshots.

i tried with firmware 5.1.0 and 6.2.0 but both with same result.
is keycombo working for you?
if yes, where could i have made a mistake so its not working for me?

my current FW is 5.1.0 and i am using an EXFAT SD Card
 

Bah-NS

Member
Newcomer
Joined
Dec 23, 2018
Messages
13
Trophies
0
Age
39
XP
210
Country
Estonia
Hi, I was checking sdsetup website and when I clicked on ReiNX a warning popped up saying ReiNX lacks vital anti telemetry measures. Is it still true after 2.0 update?
 
Status
Not open for further replies.

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: Sorry for accidentally bending over