I found a cheap second hand switch ,serial Xaw40012591xxx ( 6.2.0 version )
I checked first post and it says ' XAW4001200X and above not not safe, possibly patched '
I know its risky line and we cant know for sure but just want to ask most of switch owners above Xaw400125xxx got hack or not ? You guys think which possibility higher and what you recommend ?
thx...
I checked first post and it says ' XAW4001200X and above not not safe, possibly patched '
I know its risky line and we cant know for sure but just want to ask most of switch owners above Xaw400125xxx got hack or not ? You guys think which possibility higher and what you recommend ?
thx...
"XAW1007800X and below are safe to buy" You didn't even have to ask. BUY IT! What are you waiting for?!
so many numbers so confusing i believe mine is mod able it came with firmware 4.1 and the serial matches the range of "XAW100572 - XAW100940" i think but am not quite sure can someone verify it for me? here is the beginning of the serial, witch i am almost certain is valid for fusee. i had one b4 that worked but i ruined the right rail with a paperclip. this time if its a go then i will definitely invest in the white payload injector for atmosphere, that comes with a jig attached to the unit.
XAW100762????????
I realize i could just try to run fusee and if it failed to load the payload then i would know. but this way its more reassuring as maybe, someday the patched ones will be mod able 2. i have high hopes. so expecting good news.... thanks a bunch
XAW100762????????
I realize i could just try to run fusee and if it failed to load the payload then i would know. but this way its more reassuring as maybe, someday the patched ones will be mod able 2. i have high hopes. so expecting good news.... thanks a bunch
Yes, of course, yours is unpatched. 100762 is below 100780. Simple arithmetic, right? Nice idea to invest in a NS Atmosphere payload injector. I got one from aliexpress and it works flawlessly. You won't regret it.so many numbers so confusing i believe mine is mod able it came with firmware 4.1 and the serial matches the range of "XAW100572 - XAW100940" i think but am not quite sure can someone verify it for me? here is the beginning of the serial, witch i am almost certain is valid for fusee. i had one b4 that worked but i ruined the right rail with a paperclip. this time if its a go then i will definitely invest in the white payload injector for atmosphere, that comes with a jig attached to the unit.
XAW100762????????
I realize i could just try to run fusee and if it failed to load the payload then i would know. but this way its more reassuring as maybe, someday the patched ones will be mod able 2. i have high hopes. so expecting good news.... thanks a bunch
P.S. I hope you kept your Switch with the ruined rail. It's certainly replaceable (the rail) for cheap, and you'll have two hackable Switches in your hands.
Last edited by Dust2dust,
Guys, I need your help because I think I might be just too stupid...
I just bought a Switch (SN: XAJ700254XXXXX), so it shouldn't be a patched one and it got the 6.2 firmware on it.
I'm trying to inject the payload via TegraRCM on PC for the time being.
Somehow I'm unable to go into RCM. I tried the JoyCon tinfoil thing and the paper clip. When I press VOL+ and POWER for about 3 seconds the screen stays black (as it should).
But as soon as I plug in the USB-C cable the charging symbol appears after a few seconds and the console is booting normally and doesn't stay in RCM.
I don't own a jig or a loader yet but I'm planning on getting one of course.
What am I doing wrong?
I just bought a Switch (SN: XAJ700254XXXXX), so it shouldn't be a patched one and it got the 6.2 firmware on it.
I'm trying to inject the payload via TegraRCM on PC for the time being.
Somehow I'm unable to go into RCM. I tried the JoyCon tinfoil thing and the paper clip. When I press VOL+ and POWER for about 3 seconds the screen stays black (as it should).
But as soon as I plug in the USB-C cable the charging symbol appears after a few seconds and the console is booting normally and doesn't stay in RCM.
I don't own a jig or a loader yet but I'm planning on getting one of course.
What am I doing wrong?
"XAW1007800X and below are safe to buy" You didn't even have to ask. BUY IT! What are you waiting for?!
I had just never seen a number that low, wasn't sure if it was even legit. It's the same number on the box as on the console.
You don't need to hold VOL+ and POWER for three seconds. Just tapping the power button while holding VOL+ is enough to enter RCM. TegraRcmGUI should display a green "RCM OK" when you plug your Switch (in RCM) to your PC with the USB C cable. If it doesn't happen that way, then it might be a cable incompatibility problem, or wrong USB port, or your Switch is just off, not in RCM. If you don't have a jig yet, if I were you, I would avoid dodgy methods like tinfoil or paperclip. You risk damaging your console. If you're positive the Switch is unpatched, just wait until your jig comes in the mail. No rush. In the meantime you just download the games you're interested in, so you'll be ready.
The wrong USB port was the culprit! I tried another one and that did the trick.
Cheers!
Version number xaw100000XXXXX
Reg north America
Firmware 6.2.0
Grey
Store Amazon
New to all of this, got my switch on release day and its been updated to 6.2 but recently got the pokemon bundle switch. Is my older switch safe to mod/hack?
Reg north America
Firmware 6.2.0
Grey
Store Amazon
New to all of this, got my switch on release day and its been updated to 6.2 but recently got the pokemon bundle switch. Is my older switch safe to mod/hack?
Really fascinating find, some pikachu's are not patched. Turns out one of mine isn't! I have 2, one patched one not.
My hackable pikachu is xaw101094XXXXX. My nonhackable pikachu is xaw1010883XXXXX.
And no mistake on this, the hackable one has a higher serial # than the patched one. Its almost as if they are just randomly supplying vuln hardware. Maybe one out of every 50 units gets one or something? Instead of releasing them in a batch.
My hackable pikachu is xaw101094XXXXX. My nonhackable pikachu is xaw1010883XXXXX.
And no mistake on this, the hackable one has a higher serial # than the patched one. Its almost as if they are just randomly supplying vuln hardware. Maybe one out of every 50 units gets one or something? Instead of releasing them in a batch.
good idea but it was a rental so i exchanged it for this 1.... quick help note for people looking for lower serial number modable switches...... if you dont mind renting to own both units i got from "rac" came modable. i know the first 1 worked cause i did it in the early days of homebrew using a paperclip. BAD IDEA in my experiance as it made the pin connecions to loose aftera while to make contact with the joycon so it never registered when in hand held mode or made connection sounds when attatching it and removing it from the switch. i honestly can say I am fearful of a jig doing the same over time. the besty part about the rental is itas insured and they end up swapping it out for another new one np after you show joycon no longer syncs. just dont chime in about the pins as they have no clue and vaula new low serial 4.1 firmware "new" as in contract. as they have used ones to for less but with the insurance the cost is resonable.... espescially if the patched unmodable ones are being rolled out. who knows when they will only be renting those. FYI
D
Deleted User
Guest
Serial: XAJ4004846XXXX
Serial on device matches serial on box: yes
Region: EUR
Firmware: 4.1.0
Color option: GREY
Store: Mediamarket (Italy)
Was a bundle (if yes, which): No
Purchase date: 12/15/2018
Fusée Gelée works: Yes (TESTED)
Serial on device matches serial on box: yes
Region: EUR
Firmware: 4.1.0
Color option: GREY
Store: Mediamarket (Italy)
Was a bundle (if yes, which): No
Purchase date: 12/15/2018
Fusée Gelée works: Yes (TESTED)
- No one is chatting at the moment.
-
-
-
@
Psionic Roshambo:
One thing that just occurred to me.... The sound on the 2600 sucked less back then the harsh sound we hear now is from infinitely better speakers we have now, back when the 2600 was new speakers produced a almost muffled sound, like CRTs made old graphics look slightly better. -
@
Psionic Roshambo:
I wonder if I could recommend that to some emulation devs that perhaps the sound could use some smoothing out to simulate those old TVs
-
@
Psionic Roshambo:
I think a few of the early systems could benefit from that, at least up to the 8 bit generation, by the 16 bit generation I think TVs had gotten a lot better in almost every way
-
-
-
-
-
-
-
-
-
-
@
Xdqwerty:
it says it only works for the original R4, R4i Gold (r4ids.cn), R4iDSN (r4idsn.com) and Acekard R.P.G. -
-
-
-
-
-
@
Psionic Roshambo:
Just give it a try, but honestly if you have a 3DS you can play DS games without a card just off the internal SD card
-
-
-
-
