Hacking Question Problem with NS Atmosphere Programmer

MushGuy · Dec 7, 2018

Hello, I'm currently having a problem with NS Atmosphere Programmer. I tried using Windows 10 in normal mode, in “Disable driver signature enforcement” mode, with the antivirus disabled, and even in Test Signing Mode, but the application always stops in the middle of the verifying process and gives me the message "SAM-BA operation failed". Is there a way to solve this. This didn't happen when I was using Hekate 4.2, and now I'm trying to inject 4.5 in order to be able to use firmware 6.2.0.

arcsy · Dec 7, 2018

I had that error on my newly purchased Payload injector. What I did to fix it was closing the program, plugging the payload onto a different USB port, then opened the program again.

4nders · Dec 7, 2018

MushGuy said:
Hello, I'm currently having a problem with NS Atmosphere Programmer. I tried using Windows 10 in normal mode, in “Disable driver signature enforcement” mode, with the antivirus disabled, and even in Test Signing Mode, but the application always stops in the middle of the verifying process and gives me the message "SAM-BA operation failed". Is there a way to solve this. This didn't happen when I was using Hekate 4.2, and now I'm trying to inject 4.5 in order to be able to use firmware 6.2.0.

I’m not sure yoy can put hekate on the stick.. only cfw, like RajNX, ReiNX or Atmosphere.
Correct me if i’m wrong here..

MushGuy · Dec 7, 2018

4nders said:
I’m not sure yoy can put hekate on the stick.. only cfw, like RajNX, ReiNX or Atmosphere.
Correct me if i’m wrong here..

Well, it did work with Hekate before, so why shouldn't it work now?
Edit: Now I tried with Hekate 4.2, and I'm getting the same error, even with a previous version of the programmer (0.2). Any ideas?

Naked_Snake · Dec 7, 2018

Hekate does work with it, any payload can be flashed to ns-atmosphere

Godofcheese · Dec 7, 2018

Hm, sounds weird
I had no problem flashing latest hekate to my ns

MushGuy · Dec 7, 2018

Godofcheese said:
Hm, sounds weird
I had no problem flashing latest hekate to my ns

What operating system did you use?

Godofcheese · Dec 7, 2018

MushGuy said:
What operating system did you use?

Windows 10, x64
Have you tried using a different usb port and cable? and selected the correct COM device?
also have the device in "flashing mode" *Red light* ?

MushGuy · Dec 7, 2018

Godofcheese said:
Windows 10, x64
Have you tried using a different usb port and cable? and selected the correct COM device?
also have the device in "flashing mode" *Red light* ?

I tried a different port and a different cable, but I still get the SAM-BA error.

Godofcheese · Dec 7, 2018

MushGuy said:
I tried a different port and a different cable, but I still get the SAM-BA error.

Okay
I searched on the forums a bit if other people were having the same issues
seems like they had their issues resolved if they used a previous version of the software
"ns-atmosphere_programmer_v02.zip"
if you can get a hold of that version, go ahead and try it

EDIT
http://www.ns-atmosphere.com/media/content/setup_ns-atmosphere_programmer_v02.zip

MushGuy · Dec 7, 2018

Godofcheese said:
Okay
I searched on the forums a bit if other people were having the same issues
seems like they had their issues resolved if they used a previous version of the software
"ns-atmosphere_programmer_v02.zip"
if you can get a hold of that version, go ahead and try it

EDIT
http://www.ns-atmosphere.com/media/content/setup_ns-atmosphere_programmer_v02.zip

I already did that. Still getting verification errors.

Godofcheese · Dec 7, 2018

MushGuy said:
I already did that. Still getting verification errors.

Hmmmm
Do you have access to another pc to check if the dongle works there?
or try setting up a virtual machine and run the flasher through it

if it works on those then it's most likely driver issues and you could try updating the drivers for the com/dongle manually via device manager

MushGuy · Dec 8, 2018

Godofcheese said:
Hmmmm
Do you have access to another pc to check if the dongle works there?
or try setting up a virtual machine and run the flasher through it

if it works on those then it's most likely driver issues and you could try updating the drivers for the com/dongle manually via device manager

Still nothing. I tried uninstalling and then reinstalling the driver, but I still get the verification error. Does anybody here have an idea of why this SAM-BA error happens in the middle of the verification process?
Edit: Just in case, it it okay if I use the dongle anyway, even if the verification process stops midway?

Godofcheese · Dec 8, 2018

MushGuy said:
Still nothing. I tried uninstalling and then reinstalling the driver, but I still get the verification error. Does anybody here have an idea of why this SAM-BA error happens in the middle of the verification process?
Edit: Just in case, it it okay if I use the dongle anyway, even if the verification process stops midway?

You could try disabling DEP for the NS-Atmosphere program, but it's a long shot and I doubt it will solve your issue :/

MushGuy · Dec 8, 2018

Godofcheese said:
You could try disabling DEP for the NS-Atmosphere program, but it's a long shot and I doubt it will solve your issue :/

How do I do that?

Godofcheese · Dec 8, 2018

You want to head over to System settings on your pc
Control Panel\System and Security\System
and select Advanced system settings
A new window will open up, under the advanced tab go into the settings for "Perfomance"
Another window will pop up, Go to Data Execution prevention tab (DEP),
And select "Turn on DEP for all programs and services except those i select"
add the program to the list

I'm sure you can just search for "SystemPropertiesDataExecutionPrevention.exe" and launch it :>

MushGuy · Dec 8, 2018

Godofcheese said:
You want to head over to System settings on your pc
Control Panel\System and Security\System
and select Advanced system settings
A new window will open up, under the advanced tab go into the settings for "Perfomance"
Another window will pop up, Go to Data Execution prevention tab (DEP),
And select "Turn on DEP for all programs and services except those i select"
add the program to the list

I'm sure you can just search for "SystemPropertiesDataExecutionPrevention.exe" and launch it :>

OK, I tried deactivating DEP via command prompt and then rebooting the system. It still didn't work. OK I give up now. Tomorrow I'll just get a USB-C to USB-A cable. The dongle was a good piece of hardware, but I don't know what's going on now, if the problem is the dongle, or the PC I'm using. Is there a way to contact the NS Atmosphere website about this issue?

Godofcheese · Dec 8, 2018

MushGuy said:
OK, I tried deactivating DEP via command prompt and then rebooting the system. It still didn't work. OK I give up now. Tomorrow I'll just get a USB-C to USB-A cable. The dongle was a good piece of hardware, but I don't know what's going on now, if the problem is the dongle, or the PC I'm using. Is there a way to contact the NS Atmosphere website about this issue?

I'm also out of ideas man ^^
Best option first would be to test it on a different pc, if it doesn't work there then you should maybe contact their support

MushGuy · Dec 8, 2018

Godofcheese said:
I'm also out of ideas man ^^
Best option first would be to test it on a different pc, if it doesn't work there then you should maybe contact their support

Do you know how to contact them?

Godofcheese · Dec 8, 2018

Tbh, I don't :>
also, you could try these things they have on their site
http://www.ns-atmosphere.com/en/news/

Hacking Question Problem with NS Atmosphere Programmer

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Constant Miscreant

Insane

Well-Known Member

Insane

Well-Known Member

Insane

Well-Known Member

Insane

Well-Known Member

Insane

Well-Known Member

Insane

Well-Known Member

Insane

Well-Known Member

Insane

Similar threads

Popular threads in this forum