Hacking RELEASE biskeydump and HacDiskMount - Switch eMMC decryption/real-time mounting tools

jaysea

Well-Known Member
Member
Joined
Aug 17, 2009
Messages
279
Trophies
1
Age
46
XP
1,185
Country
Netherlands
I made a backup of my nand and then put the bis key 2 in the system partition. Now when I open rawnand bin, HacDiskMount says 'Loaded 1 keys from primary KeyStorage'. Does this mean I just broke my nand image?
Is there a way to get back to my original nand file wher it didn't have the key stored?
 

softstar

Well-Known Member
Member
Joined
Nov 18, 2006
Messages
110
Trophies
1
XP
687
Country
Belgium
hi guys, on a friend of me pc who has windows 10 64bits , when we launch hacdiskmount it crash when we click on dump or on test bis0 keys
his pc has only usb 2.0 ports,
the tegrarcm works though
thanx in advance for your help ;)
 
Last edited by softstar,

j3yps

Well-Known Member
Member
Joined
Dec 3, 2015
Messages
120
Trophies
0
Age
35
Location
Manila, Ph
XP
247
Country
Can i import my game SAVE DATA to the system, using HacDiskMount? I'm in 5.1 with SXOS and Checkpoint (latest) is not working (it says the process is successful but it's waaay too fast, and even after making a new save file from scratch and i use Checkpoint, it will just remove the newly made save data, so i need to start from scratch again.
 

ricosuave

New Member
Newbie
Joined
Aug 29, 2018
Messages
4
Trophies
0
Age
49
XP
62
Country
Netherlands Antilles
I hope someone can help me. I owned a switch and dumped the full nand and boot0 and boot1. The switch had a charging issues and was sent back to Ninty. I forgot to dump the biskeys, is there any way to get them from the NAND as I dont have access to the switch anymore?
 

2Siralv

Well-Known Member
Member
Joined
May 12, 2018
Messages
103
Trophies
0
Age
28
XP
531
Country
Canada
biskeydump - Dumps all your Switch BIS keys for eMMC contents decryption, to be used as a fusee payload (upload via the normal fusee-launcher or my TegraRcmSmash.exe).

HacDiskMount - use your BIS keys and your RawNand.bin (or the physical eMMC attached via microSD reader or using a mass storage gadget mode in u-boot/linux) to dump, restore or REAL-TIME MOUNT AND EXPLORE/MODIFY partitions from the dump file or attached physical device !

Binaries available at https://switchtools.sshnuke.net
When appropriate, README.txt file inside the archive points to the source code location

(Yes I know these have been out for a few days, but only since today was biskeydump redistributable as a precompiled binary)



I need help i was on 5.1.0 i got a exfat 64gb sdhc card i tried to follow a youtube guuide with the hackdisk software and patching with a xci that is 5.1.0 now my system wont even boot its jst a blue screen help please
 

khuong

Well-Known Member
Member
Joined
Jul 18, 2018
Messages
1,542
Trophies
1
Age
44
XP
6,479
Country
Canada
@rajkosto sorry to bump this.. never ran into this before.

trying to help a friend out, installing a chip, dumped the nand, and tried to dump the keys.. but getting this error.

biskeydump keyblob decrypted using current sbk and tseec keys not valid

reading around, looks like something happened to boot0 or boot1? (all i've done was load hekate and dump fw).. is there a fix for this? or is he pooched? switch still boots/and games still load so unsure? just worried if i mess something up won't be able to restore it.
 

Nazosan

Well-Known Member
Member
Joined
May 12, 2009
Messages
576
Trophies
1
XP
1,084
Country
United States
Uhm, I hate to state the obvious, but you neglected to mention it so it has to be said outright: you don't have autorcm do you? Because it does, after all, intentionally corrupt boot.
 
  • Like
Reactions: Subtle Demise

Adran_Marit

Walküre's Hacker
Member
Joined
Oct 3, 2015
Messages
3,781
Trophies
1
Location
42*South
XP
4,533
Country
Australia
biskeydump - Dumps all your Switch BIS keys for eMMC contents decryption, to be used as a fusee payload (upload via the normal fusee-launcher or my TegraRcmSmash.exe).

HacDiskMount - use your BIS keys and your RawNand.bin (or the physical eMMC attached via microSD reader or using a mass storage gadget mode in u-boot/linux) to dump, restore or REAL-TIME MOUNT AND EXPLORE/MODIFY partitions from the dump file or attached physical device !

Binaries available at https://switchtools.sshnuke.net
When appropriate, README.txt file inside the archive points to the source code location

(Yes I know these have been out for a few days, but only since today was biskeydump redistributable as a precompiled binary)

Trying to use biskeydumpv6 and getting TSEC FW CRC32 bb2f382a - incorrect

Error getting tsec key (retval -11), cannot continue

Trying to dump a 6.2 console

Edit: Nevermind, did a downgrade using Coidujour (pc) and was able to continue)
 
Last edited by Adran_Marit,

Cynder

Member
Newcomer
Joined
Nov 26, 2018
Messages
18
Trophies
0
Age
43
XP
79
Country
United States
HacDiskMount - use your BIS keys and your RawNand.bin (or the physical eMMC attached via microSD reader or using a mass storage gadget mode in u-boot/linux) to dump, restore or REAL-TIME MOUNT AND EXPLORE/MODIFY partitions from the dump file or attached physical device !
I know this might sound stupid, but has anyone tried a full NAND restore using HacDiskMount and memloader? I've been having trouble getting my Switch exfat compatible so this might be the best way for me to restore a backup. However, I want to be sure that restoring by partition rather than the by the whole NAND at once in Hakate is safe and "clean".
 

rajkosto

Well-Known Member
OP
Member
Joined
Apr 6, 2017
Messages
819
Trophies
1
XP
2,775
Country
use hex workshop (or dd, whatever can open a physical disk and restore raw images to it) to do full nand restores through memloader, no need for HacDiskMount which is a partition mounter/decryptor/cryptor which you need none of if just restoring RawNand/Boot0/Boot1 (or you can restore boot0/boot1/rawnand via hekate, which should be much faster actually)
 
Last edited by rajkosto,
  • Like
Reactions: Cynder

Cynder

Member
Newcomer
Joined
Nov 26, 2018
Messages
18
Trophies
0
Age
43
XP
79
Country
United States
use hex workshop (or dd, whatever can open a physical disk and restore raw images to it) to do full nand restores through memloader, no need for HacDiskMount which is a partition mounter/decryptor/cryptor which you need none of if just restoring RawNand/Boot0/Boot1 (or you can restore boot0/boot1/rawnand via hekate, which should be much faster actually)
Alright, I restored my rawnand, boot0, and boot1. However, after restoring boot0, when I went to go start memloader to get boot1 ready it booted normally (overwrote me autoRCM through ReiNX I'm guessing, I expected it but there wasn't much I could do besides putting my jig in anyways, which I thought might cause its own problems if I was wrong). I powered down and went into RCM manually to put in boot1, but will having loaded the firmware in between restoring boot0 and 1 cause issues or leave evidence?

EDIT: I'm gonna go ahead and manually RCM and redo boot0 and rawnand anyways. May take a while but better safe than sorry

EDIT 2: Okay, everything seems to be in order. News that was unread when I made the backup and read later were marked as unread again, so that's a good sign for my NAND, and it boots, so that probably means that my boot files at the very least aren't completely screwed. Thank you for your help (here and in that other thread where you suggested this)
 
Last edited by Cynder,

Manurocker95

Game Developer & Pokémon Master
Member
Joined
May 29, 2016
Messages
1,511
Trophies
0
Age
28
Location
Madrid
Website
manuelrodriguezmatesanz.com
XP
2,764
Country
Spain
Trying to use biskeydumpv6 and getting TSEC FW CRC32 bb2f382a - incorrect

Error getting tsec key (retval -11), cannot continue

Trying to dump a 6.2 console

Edit: Nevermind, did a downgrade using Coidujour (pc) and was able to continue)

I was able to dump keys on 6.2 without problems. I got problems when generating keys.txt with
"Using BOOT0.bin to get keys from package1...
Could not find keyblob_mac_key_source! Please check the integrity of the data used in the current stage!" message, tho.
 
Last edited by Manurocker95,

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: Sorry for accidentally bending over