have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
You need to delete and replace the files in your SD card, and also make sure you are sending the new payload, not the old one. It will work after doing this.have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
Sent from my BND-L24 using Tapatalk
doing that alreadyhave a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
using the newest ipl too
Raj released a lot of VERY useful tools for the switch, I'd still be stuck on 3.0.1 with no exfat ans SX OS if it weren't for him. Rei used atmo sources to load SX OS cracked (not by him) nsp installer function, wow, I'm in "awe".
reflashed my nand backup (for nothing) and still had the "same" issue with cfw (stuck at the switch logo this time, no errors) (stock booting fine)have a base 3.0.1 system, when to 5.1 with choidujourNX, was fine, then updated to NX-6.0.1-1.0 (still with cdjNX), replaced all the files on the sd with rajnx 0751 files and I'm still getting a 2011-0301 error too.
OFW boots fine.
I do see a redline showing up while RajNX is booting, but don't have time to read it..
"Rebuild and loaded package2
booting..." ?
can anyone help ? thanks
tried another sd card lying around, and it worked fine this time, so yeah, don't forget to backup your saves every once in a while, and format/change your sd card if you have such an issue.
the lull is a chance for everyone to swap to official atmosphere to give it its deserved place in the spotlight, make use of it (bigger things are in the works for this, dont want to release tiny updates being in lockstep with atmosphere all the time)
If there were available (friendly) documentation for the atmosphere, I would agree with you. Currently RajNX indispensable for many users.
I have some installed NSPs on my NAND. Is there something out there that can boot the games directly from the main menu without that download game update BS?
Shameless promotion: https://guide.sdsetup.com
The sdfiles are basically (almost) vanilla atmosphere+fancy goodies.
I'm sorry, that's not exactly what I meant.Shameless promotion: https://guide.sdsetup.com
The sdfiles are basically (almost) vanilla atmosphere+fancy goodies.
Last edited by Skonikol,
@rajkosto help me, I've used the R4S and downloaded current.uf2 (rajnx) and flash to R4S but it 0.7.4. I've updated firmware to 6.1.0 and use rajnx 0.7.5.1a. (the website R4S not link download for rajnx, and not assist good for all cfw sx os, hekate, rejnx, atmosphere... in 6.1.0, the link download is 25.9.2018. Would you could make a current.uf2 0.7.5.1a for R4S. R4S possible not compatible with rajnx, when I put it in it led red and blue and not boot to payload rajnx (It already RCM), but when I plugin PC with usb type C, tergarcmgui say rcm, but I don't send payload, un plug from pc and plug R4S in Nintendo SW, then It can boot in payload but not boot to cfw because it not compatible with 6.1.0, when I use RCM loader (same R4S or SX Gear) RCM loader boot normal. Can you help me R4S not boot to payload (It can boot if I plug NX in pc with usb type C and not send payload, then unplug and plug R4S, then it boot to payload), I dont understand
the 0.7.4 rajnx can not use with firm 6.x.x, could you make the current.uf2 file for R4S for everybody use rajnx with R4S? thanks you very much
the 0.7.4 rajnx can not use with firm 6.x.x, could you make the current.uf2 file for R4S for everybody use rajnx with R4S? thanks you very much
Last edited by beeno92,
- Joined
- Jul 20, 2016
- Messages
- 183
- Trophies
- 0
- Location
- - Planet Earth -
- Website
- www.facebook.com
- XP
- 1,354
- Country
I really like RajNX simple the best & user friendly solution. I tested both on 6.1 firmwares & worked great. Thank you very much.
But i have a question about overclock Switch?
Could you add a new feature to increase CPU or GPU for better experience of Handheld mode?Sr for my bad english
But i have a question about overclock Switch?
Could you add a new feature to increase CPU or GPU for better experience of Handheld mode?Sr for my bad english
- Joined
- Jul 20, 2016
- Messages
- 183
- Trophies
- 0
- Location
- - Planet Earth -
- Website
- www.facebook.com
- XP
- 1,354
- Country
I was able to use title manager (tinfoil) from RajNXv069.zip file on 2.3, 3.02 & 5.1 firmwares but this tinfoil is not working on 1.0.
Also, I tried goldleaf-a14ea6a on 1.0 but it stopped working with an error.
Anybody has experience about working title manager on firmware 1.0? Thank you.
Also, I tried goldleaf-a14ea6a on 1.0 but it stopped working with an error.
Anybody has experience about working title manager on firmware 1.0? Thank you.
you can't use nap installers on 1.0.0 as it lacks the services required to support the install. the minimum fw that allows nsp installs is 2.0.0 iirc
Similar threads
-
- Portal
-
- Article
-
-
-
@
Xdqwerty:
something about ea reverse engineering the genesis so they could make their games there+1 -
-
@
BakerMan:
if they get permission from 4j (the studio who helped put minecraft on consoles), they could put the console edition tutorial worlds in the game, as seeds+1
and i mean all of them (if not, maybe a few highlights, like TU1, TU31, and TU69) -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
