Hello guys, this is my first post here! I just got a MIG Switch card out of curiosity and I was tinkering with it. For those who don't know, it's used by placing XCI dumps as well as other game specific bin files in the sd card of the MIG Switch, and are obtained from the original cartridge by using an app like nxdumptool. Two of these bin files are mandatory to get the game to boot: Initial Data.bin and Certificate.bin. They stay the same for every cartridge of a specific game. Now, if you want to use an XCI dump from a shady website it's impossible to get it to work without those files. By using the Certificate.bin from another game it has no problem, but this does not count for the Initial Data.bin. So I looked for a way to obtain this Initial Data from an XCI file and read a bit of the XCI file documentation from switchbrew dot org. Here's what I understood so far: The Switch checks if the cartridge is valid by doing a challenge–response authentication on the Initial Data. The Package ID is contained both on the XCI and the Initial Data, on positions 0x110 and 0x0 respectively. The Initial Data hash is on the XCI at position 0x160. It is calculated by doing a SHA-256 hash on the full Initial Data content. So I was wondering, is there a way to to construct a functional Initial Data file starting from an XCI dump? I also tried a reverse approach by editing the Package ID in the Initial Data from another game, generating the Initial Data hash and putting it in the XCI file but is not enough to get the Switch believe it's a real game. Sorry if this may seem stupid but let me know what you think.

mig switch not working/updating??

stickybit · 2024-03-28T19:59:51+00:00

just got my mig switch and followed instructions to the T to update it and all im getting is a red light and then a message saying cart not recognised, all im trying to do is update it to the latest firmware, it says it should flash blue when...

Homebrew Question Problem with Homebrew Launcher 2.0

Thread starter Naendow
Start date May 22, 2018
Views 6,124
Replies 22

milkyTommy

Active Member

Newcomer

Level 6

Oct 20, 2018

Hey, I have the same problem since I update my sd files from https://www.sdsetup.com from my macOS ... It's a problem with mac folder or some shit ? And i have the same problem when when I put NSP files from /sxos/nsp/ but I can install files when I put theses directly into the root ... do yiu think It's a MacOS folder problem ?

CrazyRach82

Well-Known Member

Newcomer

Level 4

Oct 21, 2018

Yeah, I had a similar problem. its a problem with Mac. Remove all the home-brew and do it all again in windows. I used bootcamp

innatural

New Member

Newbie

Level 1

Oct 23, 2018

CrazyRach82 said:
Yeah, I had a similar problem. its a problem with Mac. Remove all the home-brew and do it all again in windows. I used bootcamp

All you have to do is boot Hekate and go to tools then go to the option that say something about clean files on switch folder, let it run and done. Launch HBL and there you'll see your files. I am also a Mac user and it sucks when it comes to this, but theres always a way.