Hacking Question Accidentally removed APX Windows driver

fotuwe · Oct 20, 2018

Hi,

so usually I load my sx pro payload via Mac-Google Chrome (my switch is in RCM mode)
This time I have to run it with Windows.

I wanted to change the APX Driver with "Zadig driver installer" but before I uninstalled the APX windows driver via device manager (dont ask me why).
Before the switch was recognized as APX in the device manager. Now there is a question mark

The Zadig installer wont let me install the libusbK-Driver cause the device is not being recognized.

I guess I have to reinstall the "original" APX driver somehow to make the Switch appear again as APX.
Could anyone give some advice on how to accomplish this?

Cubuss · Oct 20, 2018

Go to device manager > select your switch in the usb list > press look for updates online,

The Real Jdbye · Oct 20, 2018

fotuwe said:
Hi,

so usually I load my sx pro payload via Mac-Google Chrome (my switch is in RCM mode)
This time I have to run it with Windows.

I wanted to change the APX Driver with "Zadig driver installer" but before I uninstalled the APX windows driver via device manager (dont ask me why).
Before the switch was recognized as APX in the device manager. Now there is a question mark

The Zadig installer wont let me install the libusbK-Driver cause the device is not being recognized.

I guess I have to reinstall the "original" APX driver somehow to make the Switch appear again as APX.
Could anyone give some advice on how to accomplish this?

If the driver was autodetected originally then a reboot (followed by an unplug/replug if necessary) should make it be detected again.

fotuwe · Oct 20, 2018

Manually checking for updates tells me: the best driver is already installed (no action).
This is how it looks. After plugging in the Switch I get a notice that the device is not working properly (and the "?" appears in the device manager).

Rebooting and replugging doesnt change anything.
I tried to manually install the drivers via the TegraUI.
When I check with Zadig the following shows up:

Cubuss · Oct 20, 2018

fotuwe said:
Manually checking for updates tells me: the best driver is already installed (no action).
This is how it looks. After plugging in the Switch I get a notice that the device is not working properly (and the "?" appears in the device manager).
View attachment 147156
Rebooting and replugging doesnt change anything.
I tried to manually install the drivers via the TegraUI.
When I check with Zadig the following shows up:
View attachment 147155

uninstall the driver first then check online for updates

fotuwe · Oct 20, 2018

The moment I uninstall the device disappears. There is no way to check for updates afterwards.
Re-plugging makes the device appear again with the same "?" in the device manager

fotuwe · Oct 20, 2018

hmmm .. cant get to the point my switch is listed as APX again.
Any other guesses?

Akira · Oct 20, 2018

Download tegrarcmgui and install the driver using it

fotuwe · Oct 20, 2018

Already did.
Installation went through - restart. The switch appears as a "?" in the device manager

Cubuss · Oct 20, 2018

Try just uninstalling the drivers then reconnect the switch, it should install the driver amautomaticly,

If not mak sure you have

also make sure this is enabled

Hacking Question Accidentally removed APX Windows driver

Active Member

Well-Known Member

*is birb*

Active Member

Well-Known Member

Active Member

Active Member

I'm not a SHRIMP!!!!

Active Member

Well-Known Member

Similar threads

Popular threads in this forum

is birb