I sent an email to the firmware/chip manufacturer. I'm sure they are not going to reply, but we do not lose anything for trying.
It would be great if there was a backup tool or a way to modify the properties of these controllers, like the depicted colors in the console.
It would be great if there was a backup tool or a way to modify the properties of these controllers, like the depicted colors in the console.
You're welcome.
By the way, the tool you were using had "ver_21" at the end of the window's title bar name? I have found a more recent update from March (ver_24). If it's not the same give it a try:
https://drive.google.com/open?id=1hGk5nuG1COF9WXbMZysd5bESknaZ-3fp
By the way, the tool you were using had "ver_21" at the end of the window's title bar name? I have found a more recent update from March (ver_24). If it's not the same give it a try:
https://drive.google.com/open?id=1hGk5nuG1COF9WXbMZysd5bESknaZ-3fp
They are investigating it.
If your controller has an USB C port I suspect that you applied an old firmware to a newer PCB. I opened mine and it has written on it: 2018-06-14 V1.16, the available updates are from January and March.
By the way the real name of the controller is JRH 8575. The one that looks like an Ouya gamepad is the JRH 8576. And the Switch Pro Controller clone S 026. All use a firmware from the same manufacturer and a Bluetooth RDA chip (with FM tuner inside, lol).
If your controller has an USB C port I suspect that you applied an old firmware to a newer PCB. I opened mine and it has written on it: 2018-06-14 V1.16, the available updates are from January and March.
By the way the real name of the controller is JRH 8575. The one that looks like an Ouya gamepad is the JRH 8576. And the Switch Pro Controller clone S 026. All use a firmware from the same manufacturer and a Bluetooth RDA chip (with FM tuner inside, lol).
Guys, I SOLVED THE PROBLEM!!!!
I spent days searching Amazon for the vendors' answers and finally I found one that had the link to this Software below.
Installation is normal, instructions are in the zip. The lights flash again and to match the switch the first time you need to connect via USB.
PS. My version is the one with USB Type C.
I spent days searching Amazon for the vendors' answers and finally I found one that had the link to this Software below.
Installation is normal, instructions are in the zip. The lights flash again and to match the switch the first time you need to connect via USB.
PS. My version is the one with USB Type C.
You had better luck than me... none of the sellers I contacted knew anything about the issue and the manufacturer of the chip ignored me.
Thanks but my controller works, I was trying to find an update to help OP and anyone with the same problem.
@DavidWon and @SMontblanc
I have this controller... but my version has not usb type c. It has the old micro usb.
I'm having some problems with input lag... I had to update it once to make it work in Nintendo Switch update 5 (march update)
If I use the update @DavidWon posted, will I brick my gamepad? Or it works on both usb-c or micro-usb versions? Should I try?
UPDATE: Well... I did it! And it worked! I'm not sure if it solves the input lag problem... I will have to test it better
I have this controller... but my version has not usb type c. It has the old micro usb.
I'm having some problems with input lag... I had to update it once to make it work in Nintendo Switch update 5 (march update)
If I use the update @DavidWon posted, will I brick my gamepad? Or it works on both usb-c or micro-usb versions? Should I try?
UPDATE: Well... I did it! And it worked! I'm not sure if it solves the input lag problem... I will have to test it better
Last edited by pSouza1,
- Joined
- Sep 23, 2018
- Messages
- 35
- Trophies
- 0
- Age
- 26
- Location
- Mayenne, France
- Website
- www.youtube.com
- XP
- 758
- Country
With 12.0.0 you have to connect the controller once with USB to the dock.
Hi I have the Tutuo Controller and in firm 12 I cannot connect it wireless....
I used the usb c wire to connect the controller to my switch and it connected suffessfully... wired,, I mean, usb wired is ok, however, after that , I tried to connect the tutuo controller several times to my switch wirelessly and it was not possible...
Any suggestion??
I updated the controller using the update file in the previous page on this thread... page 1,
Any link to get the latest fimrware for this controller please???
I used the usb c wire to connect the controller to my switch and it connected suffessfully... wired,, I mean, usb wired is ok, however, after that , I tried to connect the tutuo controller several times to my switch wirelessly and it was not possible...
Any suggestion??
I updated the controller using the update file in the previous page on this thread... page 1,
Any link to get the latest fimrware for this controller please???
Similar threads
-
-
-
-
-
-
@
K3Nv2:
I'm beefing with a neighbor currently each time I ask him for help with something he makes bs excuses then ignores my calls text but seems to randomly speak when I'm done with the project after doing things to help him -
@
RedColoredStars:
DiGiorno Crispy Pan Pizza tasted pretty dang close to Pizza hut pan pizza, but Im not sure if theyve been discontinued or not. Havent seen them locally for a couple of months now. -
-
-
-
-
-
@
RedColoredStars:
Never even seen a tiger crust pizza in any stores around here. Walmart, Cub, or otherwise.
-
-
-
@
RedColoredStars:
Last thing I told her is how much I love her, and that Im not leaving her there forever and I promise to come back and take her back home with me.
-
-
-
@
Black_Manta_8bit:
hello, anyone is able to create cheat patches for cemu? i have a simple request if anyone can help -
-
-
-
-
-
