Team Rebug SwitchMe UP - Modchip installed and working

mattytrog · Sep 14, 2018

Well, thats that then.

Seriously though. Glad u sussed it.

evilsperm · Sep 16, 2018

New 4 wire diagram up on the git:
https://github.com/Aboshi/SwitchME/tree/master/wiring/4_wire_on_at_powerup

Tonymate · Sep 17, 2018

Sorry but can someone explain to me what this does?

metaljay · Sep 17, 2018

Deftsu said:
Sorry but can someone explain to me what this does?

its a cheaper and thinner trinket M0 for the switch.
Essentially install this and youll never need a dongle or USB tool

210modz · Sep 17, 2018

So with the 4 wire solution you either still use your jig or setup autorcm?

evilsperm · Sep 17, 2018

210modz said:
So with the 4 wire solution you either still use your jig or setup autorcm?

correct, and there's no way around that.

...well short of pulling your emmc or something like that

Myshkin · Sep 18, 2018

evilsperm said:
New 4 wire diagram up on the git:
https://github.com/Aboshi/SwitchME/tree/master/wiring/4_wire_on_at_powerup

ES any chance you guys could write up a quick howto for this?

My install guy has done other consoles but this will be his first switch - he's asked for a text howto to accompany the new install.

any help would be much appreciated.

evilsperm · Sep 18, 2018

Myshkin said:
ES any chance you guys could write up a quick howto for this?

My install guy has done other consoles but this will be his first switch - he's asked for a text howto to accompany the new install.

any help would be much appreciated.

Yeah have him actually read the README.md
OR look at the first page of this thread o.O

210modz · Sep 18, 2018

Myshkin said:
ES any chance you guys could write up a quick howto for this?

My install guy has done other consoles but this will be his first switch - he's asked for a text howto to accompany the new install.

any help would be much appreciated.

If your install guy needs more than just a wiring diagram, you need a new install guy.

Myshkin · Sep 18, 2018

evilsperm said:
Yeah have him actually read the README.md
OR look at the first page of this thread o.O

this readme? i just can't see a written howto there.

of course we've reviewed this thread's OP. I think he's keen for a written step-by-step, for whatever that's worth.... not to worry. we will find a way.

--------------------- MERGED ---------------------------

210modz said:
If your install guy needs more than just a wiring diagram, you need a new install guy.

it's his first time doing a switch. he's done other consoles. he is just being cautious so as not to harm my console as part of his learning curve. it's all good....

Tonymate · Sep 18, 2018

metaljay said:
its a cheaper and thinner trinket M0 for the switch.
Essentially install this and youll never need a dongle or USB tool

ah! I see, this makes things way easier. Thanks!

j00manji · Sep 19, 2018

i ordered one a long time ago. it came in the mail the other day. Its sooo small.. i am WAY too scared to try and install it... Plus I have SX Pro (which im slowly using less and less) and the Atmo-Dongle to boot Hecate/ReiNX.. i think I like it better anyhow.

darkovo · Sep 20, 2018

I installed it today, just trying to get it detected by the laptop but a drive doesn't come up.
The switchme's Data LED is just flashing, what does that mean?

Oh did the latest 4-wire install and 3.3V to NAND point, Switch turns on fine etc.

edit: Now working...
resoldered D- & D+ on Switchme and still same issue, then resoldered to the Switch Motherboard D- & D+ points and Windows detects the USB drive.
Data LED changed to pulsing red.

spotanjo3 · Sep 20, 2018

Does it running backup games ? I love Rebug team because of PS3 jailbreak.

szczuru · Sep 20, 2018

azoreseuropa said:
Does it running backup games ? I love Rebug team because of PS3 jailbreak.

This is just payload injector - so after loading payload you can boot various cfws and run backups.

na0339 · Sep 20, 2018

My Rebug chip will only inject the payload if I manually press the button on the board. Anyone know of a way to get it to consistently inject the payload automatically upon RCM?

Edit: apparently this is a limitation of the old 4-wire "always on" method. Use the new 4-wire "on at power-up" method to avoid this headache.

aut0mat3d · Sep 21, 2018

Installed switchme-up a hour ago:
Did pre-flash a payload, installed the Injector with 4-Wire Method using VC from EMMC Board.
All worked fine till i tried to change the Payload. I was able to mount the Modchip via USB on my Linux Machine and installed biskeydump payload which worked fine.
Unfortuanally i am not able to change to another payload as the Drive is only accessible for a short Moment afert Doubleclick/connect to PC.
Tested that with Linux and Windows10
Tried that with:
Rajnx Payload sent via PC, only Payload loaded then doubleclick - nada
Rajnx CFW booted to Horizon OS - drive shows in windows Explorer, but new Payload can not be copied - Drive is not available

Switch Firmware is 5.1, AutoRCM enabled

No problem to disassemble again and to desolder d+ and d- to flash the Chip via a separate USB calbe, but i am wondering how to comfortable swap payloads in the future....

evilsperm · Sep 21, 2018

aut0mat3d said:
Installed switchme-up a hour ago:
Did pre-flash a payload, installed the Injector with 4-Wire Method using VC from EMMC Board.
All worked fine till i tried to change the Payload. I was able to mount the Modchip via USB on my Linux Machine and installed biskeydump payload which worked fine.
Unfortuanally i am not able to change to another payload as the Drive is only accessible for a short Moment afert Doubleclick/connect to PC.
Tested that with Linux and Windows10
Tried that with:
Rajnx Payload sent via PC, only Payload loaded then doubleclick - nada
Rajnx CFW booted to Horizon OS - drive shows in windows Explorer, but new Payload can not be copied - Drive is not available

Switch Firmware is 5.1, AutoRCM enabled

No problem to disassemble again and to desolder d+ and d- to flash the Chip via a separate USB calbe, but i am wondering how to comfortable swap payloads in the future....

That is because you can not flash the board while only in rcm. The USB data lines get shut down in rcm. You really should just be chainloadijg payloads by now with ctcaer 4.1

jakkal · Sep 21, 2018

evilsperm said:
That is because you can not flash the board while only in rcm. The USB data lines get shut down in rcm. You really should just be chainloadijg payloads by now with ctcaer 4.1

you have pretty poor documentation man
all these things should be documented

evilsperm · Sep 21, 2018

jakkal said:
you have pretty poor documentation man
all these things should be documented

Check the git and read it's pretty straight forward to me.

You don`t want to listen to anything I say.

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

New Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum