Team Rebug SwitchMe UP - Modchip installed and working

guily6669 · Jul 19, 2018

Kukielka said:
I can't imagine any hacker group, especially TX, to come up with a modship that does something else than a trinket m0.

They have done crazy shit in the past like the awesome XboxLCD... we never know.

Kukielka · Jul 19, 2018

guily6669 said:
They have done crazy shit in the past like the awesome XboxLCD... we never know.

So far all they have done recently was develop a single app for the switch and sell it for 25$.
But most importantly: Why wanting a closed source hardware that does nothing differently than a cheap open-source Trinket M0?

evilsperm · Jul 19, 2018

Hate to break it to all you waiting for a tx internal mod chip, seeing they asked if they can just buy ours... They have zero intrest of making their own.

Yes it will be cheaper in bluk orders for the installers. We have broken out even more pads for the release version so these aren't just limited to the switch. Renders will be up later along with a page on rebug.me

For the ones saying it's not open source? It is and will always be. So if you want to solder all the components on yourself by all means well give you a bare board at cost to do so + the bom

Well also be releasing an app to flash it so you don't need to install the Arduino ide. You can even just drag the ready made payloads directly to the device just like the trinket when put in bootloader mode.

mattytrog · Jul 19, 2018

evilsperm said:
Hate to break it to all you waiting for a tx internal mod chip, seeing they asked if they can just buy ours... They have zero intrest of making their own.

Yes it will be cheaper in bluk orders for the installers. We have broken out even more pads for the release version so these aren't just limited to the switch. Renders will be up later along with a page on rebug.me

For the ones saying it's not open source? It is and will always be. So if you want to solder all the components on yourself by all means well give you a bare board at cost to do so + the bom

Well also be releasing an app to flash it so you don't need to install the Arduino ide. You can even just drag the ready made payloads directly to the device just like the trinket when put in bootloader mode.

I'm just thinking about unit cost.

The atmels are what... £6? Boards each... Pence?

Shipping...

Not making much are you?

Nice idea and design, just can't see any money to be made.

But from rebug dex days money isn't important and that should be applauded.

Nice one

guily6669 · Jul 19, 2018

You kidding me? IF TX doesnt make something different, then I guess is HELLO to Trinket M0

.

metaljay · Jul 19, 2018

evilsperm said:
Hate to break it to all you waiting for a tx internal mod chip, seeing they asked if they can just buy ours... They have zero intrest of making their own.

Yes it will be cheaper in bluk orders for the installers. We have broken out even more pads for the release version so these aren't just limited to the switch. Renders will be up later along with a page on rebug.me

For the ones saying it's not open source? It is and will always be. So if you want to solder all the components on yourself by all means well give you a bare board at cost to do so + the bom

Well also be releasing an app to flash it so you don't need to install the Arduino ide. You can even just drag the ready made payloads directly to the device just like the trinket when put in bootloader mode.

I’m actually really excited for this, great job! I’ll certainly be buying one! Even if you sell the design the TX, it’s still a huge accomplishment what you’ve developed, more than I’ve done haha!

a7mag3ddon · Jul 19, 2018

Kukielka said:
That would mean that they have no wire to sense the switches state which means the SAMD they use is always on, not even sleep mode. Resulting in a significant battery drain!

sorry? Sense wire? Not needed, you solder the 3v wire to the cap near pin5 of M92T36 which only has power with the switch powered on so no need to know the switch state just power it off because it essentially coldboots.

evilsperm · Jul 19, 2018

check my twitter feed for pricing
also pre orders will open up soon on rebug.me

subcon959 · Jul 19, 2018

evilsperm said:
check my twitter feed for pricing
also pre orders will open up soon on rebug.me

I'm guessing shipping to EU will make it considerably more expensive?

evilsperm · Jul 20, 2018

subcon959 said:
I'm guessing shipping to EU will make it considerably more expensive?

Nope we have people in the EU that will have hundreds of them to ship out over there for all of you

We have rebug team members in USA, France, germany, Lebanon, Egypt, and a few other countries.
We're really trying to keep costs down for everyone.
There really isn't any $ to be made on these things and that's fine by us, we just had fun making it and would like to bring more to the market

We might even adapt this same design for an external dongle in the very near future and the mark up wouldn't be bad because it would only need 3 more components.

aut0mat3d · Jul 20, 2018

Would be pleased to grab some 3 - 5 of that boards.
Also to step forward from m328p to samd

Myshkin · Sep 10, 2018

evilsperm said:
Yes we are cheaper than the trinket, and you can use this as a dev board as well. We have put extra pads on the bottom for various other projects.
As for "auto RCM" you have options, either strap line or software. There is no getting around that, so for you people complaining this is a trinket it IS a trinket (like any m0+ device) with all the useless trash removed and cheaper, as well as smaller and thinner to fit it in the switch better. The video I posted wasn't with auto rcm enabled hence me clicking the back 3 times. So for those of you looking for a cold boot into cfw without hardware or being tethered to a dongle/computer keep dreaming,
because you would need a full on cold boot sploit which doesnt exist at this current moment (and might never at this point)
I will have preorder pricing up on the site later today.

ES is there an install tutorial video that you would recommend?

mattytrog · Sep 10, 2018

@evilsperm is there source to the UF2 you are using? I know it`s got the trinket bootloader, just need the pinouts you are using, or can put my own in. Going to add support to my internal SAMD thread and build some files. Cheers

Never mind. Added it to my thread.

evilsperm · Sep 12, 2018

mattytrog said:
@evilsperm is there source to the UF2 you are using? I know it`s got the trinket bootloader, just need the pinouts you are using, or can put my own in. Going to add support to my internal SAMD thread and build some files. Cheers

Never mind. Added it to my thread.

on the SwitchME
pin 3 rx
pin 4 tx

mattytrog · Sep 12, 2018

evilsperm said:
on the SwitchME
pin 3 rx
pin 4 tx

Yep
Thats how I have done it. In the method 3.

Followed the traces and RX goes to pin 3 (for joycon RCM strap)
TX is pin 4. So in the "old" method 3 in my thread, pin 4 would go to M92T36 pin 5 POR

jakkal · Sep 14, 2018

how do you copy the payload to the device?

mattytrog · Sep 14, 2018

jakkal said:
how do you copy the payload to the device?

Alright Jakkas!

Double press reset to get into trinketboot

Cheers

jakkal · Sep 14, 2018

mattytrog said:
Alright Jakkas!

Double press reset to get into trinketboot

Cheers

I already figured it out
But thanks for the name calling. Real mature

mattytrog · Sep 14, 2018

jakkal said:
I already figured it out
But thanks for the name calling. Real mature

Oh cmon dont take it seriously. Thats how me and you roll.

You call me, I call you... Thats how its always been

jakkal · Sep 14, 2018

mattytrog said:
Oh cmon dont take it seriously. Thats how me and you roll.

You call me, I call you... Thats how its always been

I'm a changed man

GbaTemp is my Drug

Well-Known Member

Well-Known Member

You don`t want to listen to anything I say.

GbaTemp is my Drug

Well-Known Member

Well-Known Member

Well-Known Member

@!#?@!

Well-Known Member

Well-Known Member

Member

You don`t want to listen to anything I say.

Well-Known Member

You don`t want to listen to anything I say.

Well-Known Member

You don`t want to listen to anything I say.

Well-Known Member

You don`t want to listen to anything I say.

Well-Known Member

Similar threads

Popular threads in this forum