Tutorial  Updated

How to boot Linux on your Switch

THIS GUIDE IS DEPRECATED
THIS IS BETTER https://github.com/natinusala/painless-linux


I've successfully booted ArchLinux using ShofEL2. Here is a quick guide on how to do it - I'll assume you're computer literate and know how to use a terminal / Linux commands / git.
Everything is taken from the README of the ShofEL2 repo so if you want to go even faster, go read that instead.

Thanks to NightHammer1000 and Y2K-x for the help !

There is a simplified and faster version of this tutorial available here, with precompiled binaries so you don't have to build everything : https://github.com/SoulCipher/shofel2_linux

The result

Without a SD card ("waiting for root device mmcblk0p2") : https://photos.app.goo.gl/7y6ut5ObuHMUIMZg2
Stock Arch Linux : https://photos.app.goo.gl/yALqe3zMZRe2dSQf1
Arch Linux with LXDE : https://photos.app.goo.gl/xaEgRqeSi8jvAwpz5
RetroArch running : https://photos.app.goo.gl/vBLPo5wiBto1qiUH3
Arch Linux with GNOME : https://gbatemp.net/attachments/img_0005-jpg.121608/
Arch Linux with KDE : https://gbatemp.net/attachments/img_20180427_121605-jpg.121666/

What works / what doesn't
  • Desktop environment : Gnome, LXDE, KDE
  • Wi-Fi : works
    • You will need to reboot your Switch and run the exploit again to make the Wi-Fi work (it never works on the first boot)
    • Then enter the Network Manager Application and add your network from there
    • If it doesn't work, you will need to edit the configuration on the host computer (see the additional notes at the end of this post)
    • With LXDE : Can cause a kernel panic if used at the same time as Bluetooth
  • Bluetooth : works but Joy-Cons can't be paired
  • Touch screen : works, although LXDE is not very touch-friendly
  • Audio : doesn't work yet
  • GPU acceleration : works (via mesa), with OpenGL (and maybe Vulkan too ?)
  • Joy-Cons : not recognized
  • Volume buttons : working with Gnome but not doing anything since there is no audio device
  • Power button : doesn't do anything, no sleep mode, no graceful shutdown
  • USB : doesn't work
  • Dock : not tested yet, but I bet it doesn't do anything besides charging the battery
  • Power management / battery level : working with Gnome
What you'll need
  • A computer running Linux with a blue USB SuperSpeed port, or a Mac
    • A Linux VM can work in theory, but it depends on how the USB passthrough is implemented (apparently VMWare works, VirtualBox doesn't)
  • A USB A-to-C cable (with data support, obviously)
    • be careful as cheap cables were reported to work randomly / not work at all
  • Some time (you know, Linux is kinda large)

Prep work

First, you'll need to install the required toolchains. Open this link and download the tar.gz binaries for
  • aarch64-linux-gnu
  • arm-linux-gnueabi
Be careful to choose the right architecture for your PC (for me it was x86_64 so "gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabi.tar.xz").

Once you have them, extract them somewhere nice and add the "bin" (not "lib" as I previously stated) folder of both toolchains to your PATH ("$ export PATH=$PATH:/path/to/toolchain1/lib:/path/to/toolchain2/lib"). The building process won't work otherwise.

Then, install those dependencies (how to install them and their name might depend on your distribution) :
  • build-essential (sorry I didn't add it it was obvious to me)
  • libssl-dev
  • swig
  • bison
  • pkg-config
  • flex
  • zlib1g-dev
  • python3
  • python-dev
  • python3-pip
  • pyusb 1.0.0 : "$ sudo pip3 install pyusb==1.0.0"
  • libusb-1.0-0-dev

Compiling

Clone each required repository :

Code:
$ git clone https://github.com/fail0verflow/shofel2.git
$ git clone --recursive --depth=1 https://github.com/fail0verflow/switch-coreboot.git coreboot
$ git clone https://github.com/fail0verflow/switch-u-boot.git u-boot
$ git clone --depth=1 https://github.com/fail0verflow/switch-linux.git linux
$ git clone https://github.com/boundarydevices/imx_usb_loader.git

You can grab a coffee or two because Linux has more than 5 million files to download.

Then, build everything :

Code:
$ cd shofel2/exploit
$ make

Code:
$ cd u-boot
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make nintendo-switch_defconfig
$ make

Code:
$ cd coreboot
$ make nintendo_switch_defconfig
$ make iasl
$ make

If you have a tegra_mtc.bin file error, you'll have to extract it from a Pixel C stock image :
"$ ./build/util/cbfstool/cbfstool bootloader-dragon-google_smaug.7900.97.0.img extract -n fallback/tegra_mtc -f tegra_mtc.bin"

Or you can download it directly from here : https://0w0.st/tegra_mtc.bin (thanks to @CptPotato for uploading this)

You'll have to put it in the "coreboot/src/soc/nvidia/tegra210" directory.

Code:
$ cd imx_usb_loader
$ git reset --hard 0a322b01cacf03e3be727e3e4c3d46d69f2e343e
$ make

The big one :

Code:
$ cd linux
$ export ARCH=arm64
$ export CROSS_COMPILE=aarch64-linux-gnu-
$ make nintendo-switch_defconfig
$ make

If you encounter issues about a missing rule "/lib/firmware/nvidia/tegra210/vic04_ucode.bin" for the target "firmware" you'll have to :
  • install the firmware-misc-nonfree package
  • if you can't install it, or if it still doesn't work, download the package manually from debian sid and extract the file "/lib/firmware/nvidia/tegra210/vic04_ucode.bin" (from the root of your PC, not on the cloned repo) from the DEB (and chmod it if needed)
If you encounter issues about a missing rule "/lib/firmware/brcm/brcmfmac4356-pcie.txt", download this file and put it in "/lib/firmware/brcm/" (from the root of your PC, not on the cloned repo)

Building the rootfs

This is the annoying part. Download the archive / image corresponding to the distribution you want to use :
If it's a tarball you just downloaded

While it's downloading, you'll have to take a microSD card and, using the software of your choice (I used GParted) :
  • remove every existing partition to only have unallocated space on it (do I need to tell you that you're going to loose everything on the card ?)
  • create a tiny FAT32 partition (I chose 200mb but it doesn't matter) - that'll be mmcbkl0p1, you can label it "garbage"
  • create an ext4 partition on the remaining part of the card - that'll be mmcblk0p2, you can label it "rootfs"
  • it's important that the FAT32 partition comes first and the ext4 one comes after - on the Switch, Linux will look for mmcblk0p2, the second partition, if you have scrolling boot logs and then back to RCM it means you did it wrong
Once the rootfs tarball is downloaded, you can simple extract it to the mounting point of the ext4 partition you just created :

Code:
$ tar xvf ArchLinuxARM-aarch64-latest.tar.gz -C /mounting/point/of/ext4/partition && sync
$ cp ArchLinuxARM-aarch64-latest.tar.gz /mounting/point/of/ext4/partition/root && sync

("/mounting/point/of/ext4/partition/root" is the "root" directory on the partition)

Don't forget to properly eject the SD Card !

If "tar xvf" doesn't work for you you can install "bsdtar" and use "bsdtar -xpf" instead

Then you can put the SD card in the console.

If it's a img / bin file you just downloaded

You can simply write it on your SD card using :
  • If you're on Windows, Ether or Win32DiskImager
  • If you're on Linux / Mac OS : "sudo dd if=yourimage.img of=/dev/sdX && sync" where /dev/sdX is the device of your SD card (unmounted)
You will probably want to open a partition manager to resize the ext4 partition once it's flashed, so that it fits your SD card.

Then you can put the SD card in the console.

Booting linux

Run the exploit :

Code:
$ cd shofel2/exploit
$ sudo ./shofel2.py cbfs.bin ../../coreboot/build/coreboot.rom

Your terminal should now be waiting for the Switch to enter RCM mode.

To do so : (I don't have pictures but that's the same method as fusée gelée, just look at some video tutorials)
  • plug the Switch on your PC using the USB A-to-C cable - use a blue SuperSpeed port if you have one
  • shut it down
  • remove the right joy-con
  • using a method of your choice, short the 10th pin of the right joy-con (the last pin on the right, away from the screen, closer to the back) with the ground : that can be pin 1, 2 or 7, that can also be a screw on the joy-con rack or the console's fan - I personnaly stick a RPi jumper wire in the fan and touch the 10th pin on the other side, works everytime (like this)
  • keep the pins shorted and power the Switch while pressing the volume UP button
If it worked, the console will show a black screen and you'll see the exploit running on your terminal. If you see the Nintendo logo, it has failed. You can power off the console and try again.

Then, run those last commands :

Code:
$ cd shofel2/usb_loader
$ ../../u-boot/tools/mkimage -A arm64 -T script -C none -n "boot.scr" -d switch.scr switch.scr.img
$ sudo ../../imx_usb_loader/imx_usb -c .

Linux should then boot on your console - first the boot logs with the penguins, and then an ArchLinux login prompt. Voilà !
Again, if you have the boot logs and then a black screen, it means you did the SD card part wrong.

Additional notes

Hardware graphics acceleration


The most recents image already contain this fix.

To add mesa drivers install this package using pacman :
https://0w0.st/mesa-full-tegra-r101876.bf5e0276b6-1-aarch64.pkg.tar.xz

You will need a working internet connection to do so.

Then, use this script to choose your power profile : https://0w0.st/power.sh

Full speed RAM


According to the blog post ("Linux on Switch boot chain" section), you need to extract a file from a Pixel C factory image in order to have the RAM working at full speed. I didn't do it so I won't cover it here.

Fixing calibration issues of the touch screen (thanks to @Wizardy)

To fix calibration issues of the touch screen, edit the file /usr/share/X11/xorg.conf.d/10-evdev.confg (of the rootfs)

And change the InputClass section to :

Code:
Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
        Option "InvertX" "no"
        Option "InvertY" "yes"
        Option "SwapAxes" "yes"
        Option "Calibration" "0 1279 0 719"
EndSection

Wi-Fi

To setup Wi-Fi, mount the rootfs partition on your host PC and edit the configuration for your network in the file "/etc/NetworkManager/system-connections" (if it doesn't exist, take Gigaspot).

To have a working Wi-Fi you must reboot your Switch and run the exploit again each time you power it off

Moving the rootfs to another partition

If you want to move the rootfs to another partition on your SD card, edit the "shofel2/usb_loader/switch.scr" file and replace "/dev/mmcblk0p2" by the partition you want to use.
 
Last edited by natinusala,

00Cancer

Well-Known Member
Newcomer
Joined
Feb 1, 2017
Messages
67
Trophies
0
Age
20
XP
103
Country
United States
I haven't seen this mentioned anywhere, but you can use the same SD card for Switch data. Just put the files onto the first, FAT32 partition, and make it large enough to fit your files. Then you can use your Switch games on the SD and boot Linux from the same SD card.
That was the intent of the OP.
 

Type_O_Dev

Developer
Developer
Joined
Dec 12, 2017
Messages
683
Trophies
0
XP
1,459
Country
United States
for headless use

install vlcserver threw pacman
$ sudo pacman -S vncserver
then run to create password
$ vncserver
then kill
$ vncserver -kill :1
then run
$ x0vncserver -display :0 -passwordfile ~/.vnc/passwd

also Midori works well for internet plus has a smaller footprint over cromium
 
  • Like
Reactions: lordelan

Hadobedo

Well-Known Member
Newcomer
Joined
Dec 5, 2015
Messages
72
Trophies
0
Age
33
XP
280
Country
Canada
Ok, I've gotten to the point where I've ironed out all other errors other than one. Whenever I run sudo ./boot_linux.sh I get the error:
config file <./imx_usb.conf>
vid=0x0955 pid=0x701a file_name=switch.conf
no matching USB device found

Did anyone else have this problem and manage to solve it? I looked in this thread and someone said "sudo ../../imx_usb_loader/imx_usb -c ." but I'm not sure what to do with that command
 

00Cancer

Well-Known Member
Newcomer
Joined
Feb 1, 2017
Messages
67
Trophies
0
Age
20
XP
103
Country
United States
Ok, I've gotten to the point where I've ironed out all other errors other than one. Whenever I run sudo ./boot_linux.sh I get the error:
config file <./imx_usb.conf>
vid=0x0955 pid=0x701a file_name=switch.conf
no matching USB device found

Did anyone else have this problem and manage to solve it? I looked in this thread and someone said "sudo ../../imx_usb_loader/imx_usb -c ." but I'm not sure what to do with that command
Are you using the precompiled library?

--------------------- MERGED ---------------------------
ooh nice saw this on twitter. may try it before nintendo screws it
Nintendo cant fix this, it would require a hardware modifiction.
 

robozman

Member
Newcomer
Joined
Apr 25, 2018
Messages
7
Trophies
0
Age
33
XP
68
Country
United States
Ok, I've gotten to the point where I've ironed out all other errors other than one. Whenever I run sudo ./boot_linux.sh I get the error:
config file <./imx_usb.conf>
vid=0x0955 pid=0x701a file_name=switch.conf
no matching USB device found

Did anyone else have this problem and manage to solve it? I looked in this thread and someone said "sudo ../../imx_usb_loader/imx_usb -c ." but I'm not sure what to do with that command
You need to sleep between the two commands to give the switch time to load uboot
(I had the same problem with my script)
 

Hadobedo

Well-Known Member
Newcomer
Joined
Dec 5, 2015
Messages
72
Trophies
0
Age
33
XP
280
Country
Canada
Are you using the precompiled library?

--------------------- MERGED ---------------------------

Nintendo cant fix this, it would require a hardware modifiction.

Nevermind, got it to boot. I had a messed up microSD card, it wasn't formatted correctly
 

tomman321

Well-Known Member
Member
Joined
Feb 4, 2016
Messages
130
Trophies
0
Age
26
XP
393
Country
United States
Same thing as the arch linux example in the OP. Just replace the archlinux name with what you downloaded.
I don't get what I'm supposed to put in place of "/mounting/point/of/ext4/partition" and "/mounting/point/of/ext4/partition/root"
Not super familiar with doing stuff like this, and I don't see what the difference between those two directories is.
 
Last edited by tomman321,

tomman321

Well-Known Member
Member
Joined
Feb 4, 2016
Messages
130
Trophies
0
Age
26
XP
393
Country
United States
that wont work you will have to manually extract then copy over to sd card. when it was packed it was packed with all hierarchy
media/ioannis/rootfs/ then copy the contents of this folder to your sd card ext4 partition
So I have to extract the whole thing to linux root first, correct? Then drag the contents of the "roofts" folder to the second partition of my sd?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    LeoTCK @ LeoTCK: im going off now...I'll turn off my brain