- Joined
- Jul 11, 2009
- Messages
- 14,575
- Trophies
- 2
- Age
- 29
- Location
- I forgot
- Website
- POCKET.LIKEITS
- XP
- 19,225
- Country
You can use them both at the same time, however (AFAIK anyways) people have only gotten it to work where the SD2Vita was ux0 and the PSVSD was uma0. I can't personally attest to whether this works, I'm merely simplifying instructions I found on a particular subreddit that's not allowed to be linked here. Some people say they can't get it working, others say it works no problem, so I imagine it's just one of those things that either works or doesn't.
The setup is pretty simple, it should be:
1). Download and install SD2Vita plugin as normal. You'll want to set this up first, since it'll be mounted as ux0.
2). Download and install USBMC.vpk. Run the USBMC installer, it'll reboot your system. I don't remember if it'll update the tai config for you, but make sure both the SD2Vita and USBMC plugins are enabled under the kernel section.
3). Make sure you have the latest VitaShell installed. Open it, and then you should be able to mount the PSVSD as uma0.
And that's it. You might need to make sure both SD cards you use are formatted via exfat, but otherwise that's all you should need to do.
The setup is pretty simple, it should be:
1). Download and install SD2Vita plugin as normal. You'll want to set this up first, since it'll be mounted as ux0.
2). Download and install USBMC.vpk. Run the USBMC installer, it'll reboot your system. I don't remember if it'll update the tai config for you, but make sure both the SD2Vita and USBMC plugins are enabled under the kernel section.
3). Make sure you have the latest VitaShell installed. Open it, and then you should be able to mount the PSVSD as uma0.
And that's it. You might need to make sure both SD cards you use are formatted via exfat, but otherwise that's all you should need to do.
Also maybe "usbmc (ux0+uma0+imc0 mod) pre-release" from here: https://github.com/M1lk4h0l1c/usbmc/releases
I am using the modified usbmc.spkrx, I was wondering if it was possible to use sd2vita as the imc0 slot on an Oled PS Vita, I already have the psvsd set as ux0, and the sony memory set as uma0.
Similar threads
-
AncientBoi
-
Sicklyboy
-
Sonic Angel Knight
-
Xdqwerty
what are you looking at?
-
-
@
Psionic Roshambo:
Like not emulating the entire SNES but just a loader and the enhancement chips perhaps even slightly overclocked like FX-2 -
-
-
-
-
-
-
@
SylverReZ:
@Psionic Roshambo, The Doom NES cartridges, a few batches were made. One was given to AVGN as seen in his Doom video.+1 -
-
@
Sicklyboy:
I finally modeled and 3d printed the new HDD cages I need in order to build my 2nd NAS. Original ones don't fit the mounting holes on the hdds I'm using. Been sitting on this project for over 2 years smfh
-
-
@
Sicklyboy:
I'm finally gonna get this NAS racked and powered on tonight, install truenas core, and burn the disks in with badblocks
-
@
Sicklyboy:
Also another 70TB going in the front mount drive bays of this server. 182tb raw, going to probably use a zfs RAID-Z3 for 3 parity disks, so 140TB usable
-
@
Sicklyboy:
I could claw back 14tb by only doing 2 parity disks but I feel like with 13 disks in the RAID I'd be kind of pushing my luck on rebuild time if I encounter a disk failure
-
-
-
-
-
-
-
-
-
-
