Homebrew DSi Downgrading - The Complete Guide

nastys · Aug 20, 2017

JimmyZ said:
By the way, some builtin sd card reader should work as long as they're real SD card readers. Just insert any sd card, if the device name is /dev/mmcblk? not /dev/sd?, you're good to go.

I believe all Android phones use /dev/mmcblkx instead of /dev/sdx as well, but since they use a microSD slot you would need an SD to microSD adapter (they do exist).
By the way I have an Orange Pi, which unfortunately has a microSD slot

JimmyZ · Aug 20, 2017

mariogamer said:
There's a pecial version of linux who load itself in the memory of the PI (permit to swap SD)

Yeah, use that.

nastys said:
I believe all Android phones use /dev/mmcblkx instead of /dev/sdx as well, but since they use a microSD slot you would need an SD to microSD adapter (they do exist).
By the way I have an Orange Pi, which unfortunately has a microSD slot

Recent raspberry pi uses microSD slot too...

Lord_Friky · Aug 20, 2017

JimmyZ said:
Recent raspberry pi uses microSD slot too...

You can solder it in the board directly

nastys · Aug 20, 2017

Lord_Friky said:
You can solder it in the board directly

Or just get one of these

Aletron9000 · Aug 21, 2017

When testing the nand in no$gba is it supposed to say 1.4 in system settings, because mine still says 1.4.5

GhostLatte · Aug 21, 2017

Aletron9000 said:
When testing the nand in no$gba is it supposed to say 1.4 in system settings, because mine still says 1.4.5

You didn't downgrade the system version title.

Aletron9000 · Aug 21, 2017

GhostLatte said:
You didn't downgrade the system version title.

what version of that title should i download? I did not see to downgrade that title in the guide

GhostLatte · Aug 21, 2017

Aletron9000 said:
what version of that title should i download? I did not see to downgrade that title in the guide

It's not in the guide.

Aletron9000 · Aug 21, 2017

GhostLatte said:
It's not in the guide.

So is there any way to check that i am on 1.4 if system settings says 1.4.5?

GhostLatte · Aug 21, 2017

Aletron9000 said:
So is there any way to check that i am on 1.4 if system settings says 1.4.5?

You can obtain the title via NUS.

ToneCapone-RF · Aug 21, 2017

Aletron9000 said:
So is there any way to check that i am on 1.4 if system settings says 1.4.5?

Its USA V4 from NUS Downloader

siamese · Aug 26, 2017

@Gadorach

including version downgrading will show system is on 1.4, it would look like this in your title downgrading section:

4)Version

[DS Icon] -> [System] -> [0003000F484E4CXX - System Settings] -> [[Your Region Here]] -> [v4]

Version 4 of 0003000F484E4C45 is 1.4U this was tested and confirmed in this tread by @MarioMasta64

http://gbatemp.net/threads/dsi-version-data.479640/

MarioMasta64 · Aug 27, 2017

siamese said:
@Gadorach

including version downgrading will show system is on 1.4, it would look like this in your title downgrading section:

4)Version

[DS Icon] -> [System] -> [0003000F484E4CXX - System Settings] -> [[Your Region Here]] -> [v4]

Version 4 of 0003000F484E4C45 is 1.4U this was tested and confirmed in this tread by @MarioMasta64

http://gbatemp.net/threads/dsi-version-data.479640/

or was it :^) but yea it was

smf · Aug 27, 2017

Aletron9000 said:
So is there any way to check that i am on 1.4 if system settings says 1.4.5?

You could just downgrade the version number to 1.4 without downgrading anything else, checking the version number is therefore pointless.

The only way you can really tell if it's been successfully downgraded is to check that the exploits work.

Jhynjhiruu · Sep 1, 2017

Shouldn't you change the DS cart whitelist step so it says 41 (the code for all regions, like you said when downloading it) rather than XX?

Deleted-394630 · Oct 31, 2017

When I'm doing the Decrypiting Nand part I get: TWLTool v1.1 by WulfyStylez Special thanks to CaitSith2

Error, expected 32 hex characters when parsing text "CID.bin"

dark_samus3 · Oct 31, 2017

SketchyPixel said:
When I'm doing the Decrypiting Nand part I get: TWLTool v1.1 by WulfyStylez Special thanks to CaitSith2

Error, expected 32 hex characters when parsing text "CID.bin"

You have to input the contents of cid.bin, rather than just specifying it as an input filename.

Deleted-394630 · Oct 31, 2017

dark_samus3 said:
You have to input the contents of cid.bin, rather than just specifying it as an input filename.

Oh, okay.

MarioMasta64 · Nov 4, 2017

op please update twltool. its old and *has* bricked people.

Gadorach · Nov 10, 2017

MarioMasta64 said:
op please update twltool. its old and *has* bricked people.

You can't brick as a result of using TWLtool unless you delete your original NAND image. That's silly. If you mod your NAND without a hardmod, that's on you. Keep a backup and get it hardmodded if it needs to be fixed.

Homebrew DSi Downgrading - The Complete Guide

ナースティス

Sarcastic Troll

Active Member

ナースティス

Well-Known Member

GBAtemp's Official Van Master™

Well-Known Member

GBAtemp's Official Van Master™

Well-Known Member

GBAtemp's Official Van Master™

Well-Known Member

Well-Known Member

hi. i make batch stuff and portable shiz

Well-Known Member

Well-Known Member

Deleted-394630

Guest

Well-Known Member

Deleted-394630

Guest

hi. i make batch stuff and portable shiz

Electronics Engineering Technologist

Similar threads

Popular threads in this forum