NTRBoot Released!

It's here!
ntrboot_checklist_2.png

Info

@Normmatt has created a way to run B9S .firm files from bootrom via a DSi Flashcard and a magnet! This works on every 3DS on any firmware version.

For installation without a PC, user @TheCyberQuake has created a pack which will automatically install B9S and copy over essential starter homebrew from the flashcard's SD to the 3DS's. This will mainly be used for PC-less B9S installations. If you have a PC with you, use 3ds.guide. Read more here: https://gbatemp.net/threads/481141/

How does this work?

This works because of a flaw in the bootrom. Before the bootrom boots the NAND, it checks to see if Start+Select+X is held down, and if the shell is closed. If these requirements are met, it will boot an NDS cartridge from the bootrom. This give that cartridge bootrom access. You might be wondering how you'd hold down buttons while the shell is closed, and why you need a magnet. If you put a magnet in a specific spot on the 3DS, it will go into sleep mode. Using this, you can boot the NDS cartridge with the buttons held down while in sleep mode! Using a reflashable flashcard, you can boot B9SInstaller using the flashcard, and easily install it on your 3DS.
The 2DS doesn't need a magnet since a switch puts it to sleep instead of a magnet.

What does this mean?

  1. Any 3DS model on any firmware can be hacked with minimal effort
  2. You can unbrick any 3DS model from any type of brick.
    - Remember, you don't need a NAND backup for this. Just do a CTRTransfer.
    - This does not apply to MCU bricks.
  3. Even consoles with fried NAND, or even the NAND chip physically removed, can use this
This is incredibly impressive stuff, and will most likely be released soon! edit: now!

FAQ

Q: Can Nintendo patch this?
A: Nope! Not without a new hardware revision.

Q: My flashcard is blocked by my firmware! Can I still use this?
A: Yes! The flashcard blacklist is not enabled on the bootrom.

Q: Why can't this work with my flashcard?
A: The installation requires you to flash NTRBoot to the flashcard's nand. Most DS flashcards, such as the original R4, have a ROM, which is not flashable.

Q: Can I install NTRBoot on my flashcard without another 3DS system?
A: If you can run NDS roms on your 3DS with it, then yes. If it's blocked on your 3DS version, then you'll need another 3DS system to use it.

Q: Will my 3DS flashcard work?
A: No, only the NDSi flashcards listed above.

Q: Will any other flash cards work?
A: Only the ones listed in the OP. However keep in mind that flashcards such as the DSTT, Supercard DS2 and R4 SDHC Dualcore are planned to be supported in the future.

Q: I tried to do this with my cartridge and it didn't work?
A: It doesn't work with regular DS cards.

Q: Can I unbrick from a ____ brick?
A: Considering the card has access to the bootrom, yes! This can unbrick any brick (except MCU), unless you've taken a knife to the motherboard.

Q: Can I install B9S on the latest firmware with this?
A: Again, since the card has access to the bootrom, you can do this easily! Just plug in your flashcard, boot up using the magnet and button combination, and install.

Q: Does this work on the New Nintendo 2DS XL?
A: Yes!

:arrow: Release
:arrow: Guide
:arrow: Free NTRBoot Flashing
:arrow: Free B9S Installations

Here is SciresM's post about this

Please see SciresM's presentation on bootromhax.
 
Last edited by Deleted member 381889,

Chebico

Well-Known Member
Newcomer
Joined
Feb 24, 2010
Messages
51
Trophies
0
Location
England
Website
Visit site
XP
504
Country

I tried to use this on NDS.
I use X to load flashrom - it asks me to take out and back in the cart then i press A.
Chip ID: 00000FC2
HW REV: 81818181
It dumps 100%

Then press A to inject - it asks me remove and replace again
Same ID/REV as above.

Then i chose retail device and flashes to 100% then i exit

But the flash card still loads AKAIO after so hasnt worked.

Any ideas?
 

d3m3vilurr

Well-Known Member
Newcomer
Joined
Jun 2, 2016
Messages
51
Trophies
0
Age
39
XP
104
Country
I tried to use this on NDS.
I use X to load flashrom - it asks me to take out and back in the cart then i press A.
Chip ID: 00000FC2
HW REV: 81818181
It dumps 100%

Then press A to inject - it asks me remove and replace again
Same ID/REV as above.

Then i chose retail device and flashes to 100% then i exit

But the flash card still loads AKAIO after so hasnt worked.

Any ideas?
ak2i not remove flashcard feature, just add ntrboothax to cart. (it mean, you can use both features whenever restore or not).
 

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country
I tried to use this on NDS.
I use X to load flashrom - it asks me to take out and back in the cart then i press A.
Chip ID: 00000FC2
HW REV: 81818181
It dumps 100%

Then press A to inject - it asks me remove and replace again
Same ID/REV as above.

Then i chose retail device and flashes to 100% then i exit

But the flash card still loads AKAIO after so hasnt worked.

Any ideas?
The acekarddoes this... Try to boot it as NTRboot, it is likely working.

--------------------- MERGED ---------------------------

does it will release soon ntrboothax for dstwo or r4sdhc dual core ?
r4 dualcore has experimental support as of today, nothing new regarding DStwo, as there are issues with flashing back.
 

laharl22

Well-Known Member
Member
Joined
Dec 19, 2014
Messages
1,767
Trophies
0
Age
38
XP
615
Country
France
The acekarddoes this... Try to boot it as NTRboot, it is likely working.

--------------------- MERGED ---------------------------


r4 dualcore has experimental support as of today, nothing new regarding DStwo, as there are issues with flashing back.
link please for r4 sdhc dual core please its not important if i can be reflashed the linker for now i can wait
 
  • Like
Reactions: Quantumcat

TomDing

Member
Newcomer
Joined
Aug 13, 2017
Messages
5
Trophies
0
Age
45
XP
124
Country
United States

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country
I have read the OP and .guide and did not find it being mentioned and sorry if my question has been asked by someone else.

If I understand correctly, with this flasher you DO NOT need a second CFW 3DS to flash the rom of your flashcard for ntrboothax. Instead you can do the pre-flash with an old NDSL. Is it correct?
Yes, either DS lite or OG DS (phat). DSi doesn't support card swapping.
 

Boz

Member
Newcomer
Joined
Jul 11, 2017
Messages
22
Trophies
0
Age
29
XP
421
Country
United Kingdom
This is great because it means I can cfw 3ds' without having to hardmod every time. I tend to scatter tools and parts around every time I do.
 

GBHAKC75

Well-Known Member
Member
Joined
Jan 26, 2008
Messages
406
Trophies
0
XP
563
Country
France
Would it be possible to make the 3DS flasher to boot something else than "boot.firm" (ntrboot.firm for example, like the NDS flasher).

I don't have any NDS to flash my AK2i and I'd like to test NtrBootHax (but I can't be sure if this works or not since I have B9S installed and the 3DS flasher also boots "boot.firm")...
 

DatakadjrBkajsbr

Active Member
Newcomer
Joined
Aug 7, 2012
Messages
35
Trophies
0
XP
137
The acekarddoes this... Try to boot it as NTRboot, it is likely working.

--------------------- MERGED ---------------------------


r4 dualcore has experimental support as of today, nothing new regarding DStwo, as there are issues with flashing back.
So is it true that dual core now working ? Anyone can upload compiled flasher for dual core?
 

urherenow

Well-Known Member
Member
Joined
Mar 8, 2009
Messages
4,762
Trophies
2
Age
48
Location
Japan
XP
3,659
Country
United States
Would it be possible to make the 3DS flasher to boot something else than "boot.firm" (ntrboot.firm for example, like the NDS flasher).

I don't have any NDS to flash my AK2i and I'd like to test NtrBootHax (but I can't be sure if this works or not since I have B9S installed and the 3DS flasher also boots "boot.firm")...
In short, yes (and has been done and linked to at least a couple of times in this thread already), but that's a no good excuse anyway. You can replace your boot.firm with safeboot9installer, and test it. If it didn't work, then NOTHING will display while the magnet is in the correct spot. If it works, then it will boot as soon as you let go of the buttons (with magnet still there, even)
 

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,247
Would it be possible to make the 3DS flasher to boot something else than "boot.firm" (ntrboot.firm for example, like the NDS flasher).

I don't have any NDS to flash my AK2i and I'd like to test NtrBootHax (but I can't be sure if this works or not since I have B9S installed and the 3DS flasher also boots "boot.firm")...
Correct, a .firm payload (signed with the alternate keys, usually but not necessarily B9S-ntr) is written to the flashcard itself, what it does (for example loading another from the console's SD) is that payload's problem

@democracy @subcon959
https://gbatemp.net/attachments/boot9strap-ntr-ntrboot-firm-zip.95474/
 
Last edited by gamesquest1,

annson24

The Patient One
Member
Joined
May 5, 2016
Messages
1,191
Trophies
0
Age
32
XP
1,843
Country
Philippines
Would it be possible to make the 3DS flasher to boot something else than "boot.firm" (ntrboot.firm for example, like the NDS flasher).

I don't have any NDS to flash my AK2i and I'd like to test NtrBootHax (but I can't be sure if this works or not since I have B9S installed and the 3DS flasher also boots "boot.firm")...
When flashing the flashcart with ntrboot flasher, use this boot9strap_ntr https://github.com/Aluminite/boot9strap/releases instead of the official one. This is specifically made for that purpose.

Sent from my SM-G950F using Tapatalk
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    S @ salazarcosplay: How are you @AncientBoi :tpi: :tpi: :tpi: :tpi: :tpi: