Hacking Issues after installing B9S with LUMA 8.0

M-Gardevoir · Jun 9, 2017

Hello there !

I've followed this guide : https://3ds.guide/installing-boot9strap-(browser) to hack my O3DS XL but i have a big issue right now. I've got an ARM9 exception now.

I still have access to Payload and Luma3DS BTW.

Here the picture of error : http://imgur.com/a/9Gkej
Here the crash dump : https://drive.google.com/open?id=0Bypd9sxJbJd4STZtbHdpa084Tm8
My console is an OLD 3DS in 4.5
Help me please.

MelonGx · Jun 9, 2017

Do not use nightlies.
They have bugs.
Use 8.0 retail instead.

M-Gardevoir · Jun 9, 2017

MelonGx said:
Do not use nightlies.
They have bugs.
Use 8.0 retail instead.

I took my version of Luma3DS in there : https://github.com/AuroraWright/Luma3DS/releases and i'm not using nighlies. I took the last one in there. (Luma3DSv8.0.7z)

MelonGx · Jun 9, 2017

M-Gardevoir said:
I took my version of Luma3DS in there : https://github.com/AuroraWright/Luma3DS/releases and i'm not using nighlies. I took the last one in there. (Luma3DSv8.0.7z)

Retail version should not be crashed.
Try putting boot.firm only on the SD.

M-Gardevoir · Jun 9, 2017

MelonGx said:
Retail version should not be crashed.
Try putting boot.firm only on the SD.

Same results here. After setting up LUMA3DS (i let it default) it will show me the ARM9 exception error.

liomajor · Jun 9, 2017

M-Gardevoir said:
Same results here. After setting up LUMA3DS (i let it default) it will show me the ARM9 exception error.

The initial 8.0 was somewhat rushed and has errors to iron out.

You can try my build 461035b i just compiled an hour ago > ZS

M-Gardevoir · Jun 9, 2017

liomajor said:
The initial 8.0 was somewhat rushed and has errors to iron out.

You can try my build 461035b i just compiled an hour ago > ZS

Same results.

liomajor · Jun 9, 2017

M-Gardevoir said:
Same results.

Maybe your nand is the reason, did you use patches or something else?

I would chainload gm9, create a backup and ctr transfer to a clean 9.2

M-Gardevoir · Jun 9, 2017

liomajor said:
Maybe your nand is the reason, did you use patches or something else?

I would chainload gm9, create a backup and ctr transfer to a clean 9.2

Well i don't know what is chainloading but it will boot me into GodMode9.

Xiphiidae · Jun 9, 2017

M-Gardevoir said:
My console is an OLD 3DS in 4.5

There's your problem. System Versions <9.0 have not been tested and are likely to never be supported.

I recommend you make a NAND backup, and then update to 11.4. When and how, exactly, does the error occur?

M-Gardevoir said:
Well i don't know what is chainloading but it will boot me into GodMode9.

Put a .firm payload file in your sd:/luma/payloads folder, and hold the Start button while booting.

MelonGx said:
Retail version should not be crashed.

There have been plenty of reports of 'stable' Luma fims causing crashes (though I personally haven't experienced any). Luma is not divine and not beyond criticism. It can have flaws.

M-Gardevoir · Jun 9, 2017

Xiphiidae said:
There's your problem. System Versions <9.0 have not been tested and are likely to never be supported.

I recommend you make a NAND backup, and then update to 11.4. When and how, exactly, does the error occur?

Put a .firm payload file in your sd:/luma/payloads folder, and hold the Start button while booting.

There have been plenty of reports of 'stable' Luma fims causing crashes (though I personally haven't experienced any). Luma is not divine and not beyond criticism. It can have flaws.

Well now i'm a little scared, idk where i can found this .firm.

And this error occur on boot.

Xiphiidae · Jun 9, 2017

M-Gardevoir said:
Well now i'm a little scared, idk where i can found this .firm.
And this error occur on boot.

Here is the link to the latest GodMode9 release.

If you can't boot into the Luma Chainload menu, try temporarily putting GodMode9 on the root of your SD card as boot.firm (backup your current boot.firm, which is Luma, before doing this).

(In addition, here is a link to the latest SafeB9SInstaller. If possible, try to see if you can boot into this as well.)

M-Gardevoir · Jun 9, 2017

I've successfully booted into GM9.

But idk what to do next. How i can update my SysNand now ?

liomajor · Jun 9, 2017

Xiphiidae said:
I recommend you make a NAND backup, and then update to 11.4.

He can't boot since luma3ds fails, updating to 11.4 straight away will be a big PROBLEM if BS9 is deactivated > HardwareMOD / DSi game to install BS9 again.

Chainloading gm9 and to ctr transfer to at least 9.2 without disabling BS9 is safe!

M-Gardevoir said:
How i can update my SysNand now ?

After booting Luma3DS, your BS9 installation is secured, just update the normal way.

M-Gardevoir · Jun 9, 2017

liomajor said:
He can't boot since luma3ds fails, updating to 11.4 straight away will be a big PROBLEM if BS9 is deactivated > HardwareMOD / DSi game to install BS9 again.

Chainloading gm9 and to ctr transfer to at least 9.2 without disabling BS9 is safe!

After booting Luma3DS, your BS9 installation is secured, just update the normal way.

Well sorry for being noob but what is ctr transfer and how i can do that ?

Xiphiidae · Jun 9, 2017

M-Gardevoir said:
I've successfully booted into GM9.

But idk what to do next. How can update my SysNand now ?

The first thing you should do is backup your current NAND (In GodMode9, press Home, then select 'More...', then select 'Backup NAND').

As for updating your SysNAND, I'm not 100% sure. The safest thing to do would be to make an issue on Luma's Github page, and wait for a release that supports older System Versions.

liomajor said:
He can't boot since luma3ds fails, updating to 11.4 straight away will be a big PROBLEM if BS9 is deactivated > HardwareMOD / DSi game to install BS9 again.

Chainloading gm9 and to ctr transfer to at least 9.2 without disabling BS9 is safe!

I agree that doing a CTRTransfer to 9.2 is possible. I never suggested that anyone should 'disable' B9S. I suggest you read what I actually wrote before accusing me of anything.

liomajor said:
After booting Luma3DS, your BS9 installation is secured, just update the normal way.

They can't boot into Luma at the moment. That's the issue.

liomajor · Jun 9, 2017

Xiphiidae said:
before accusing

Never did, it's just a safety warning, you never know what ppl will do or interpret

Xiphiidae · Jun 9, 2017

liomajor said:
Never did, it's just a safety warning, you never know what ppl will do or interpret

I don't see how anyone could interpret what I said as a suggestion to disable B9S, but fair enough.

M-Gardevoir · Jun 9, 2017

Well i'm doing an NAND backup now but what i have to do next ?

Thanks a lot guys btw.

liomajor · Jun 9, 2017

1. Backup current NAND (what you're doing now)
2. Download correct file to ctr transfer 9.2
3. Use either decrypt9 or godmode9 to ctr transfer to 9.2
4. Try booting (should work now!) Luma3DS
5. As i said, after booting (only) Luma3DS, your bs9 installation
is safe and you can update to 11.4 if you want the normal way
6. Make a backup of your final nand for safety reasons

Never update without booting Luma3DS first!

Hacking Issues after installing B9S with LUMA 8.0

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum