Hacking 3DS NOOB PARADISE - Ask questions here

SuperDan · Jun 6, 2017

W4T4R1 said:
Bricks are only user-fault; with the current and latest method there are basically no bricks reported (I heard that a couple of users bricked but it was user's fault, the process is completely safe)

nice i will try i will report back and tell you how it all went

LUCIFXR · Jun 6, 2017

Is there anyway to return to the previous version of B9S? I missed a step and I can't go back since I can't access GodMode9.

ihaveahax · Jun 6, 2017

LUCIFXR said:
Is there anyway to return to the previous version of B9S? I missed a step and I can't go back since I can't access GodMode9.

use the latest release: https://github.com/d0k3/GodMode9/releases

LUCIFXR · Jun 6, 2017

ihaveamac said:
use the latest release: https://github.com/d0k3/GodMode9/releases

~~I followed the guide and this is the one linked, I seem to have misplaced boot9strap.firm and boot9strap.firm.sha and put them in the payloads instead of the boot9strap folder~~

EDIT: Fixed it by placing the old Luma update and proceeded with the following sections.

Danilo91 · Jun 6, 2017

I'm stuck in "An old unsupported FIRM has been detected. Copy firmware.bin in / luma to boot."

How can I fix this? I've installed B9s but I don't finsh because of this error.

Nand 4.3.0-10U.

steffy · Jun 6, 2017

Hello, a few days ago I deleted a9lh (butnot luma) through decrypt9, I forgot the ctr-transfer part. Now I can't use my 2ds because it shows a black screen when I turn it on. I don't know if files are missing or if I just killed my console. I need more informations so that I could get a clean 2ds or at least a working one.

infinete · Jun 6, 2017

I am trying to dump DSP, I am using the new HBL 2.0 version but DSP Dumper tells me I need to be using *hax 2.0+, where can I get this?

Quantumcat · Jun 7, 2017

steffy said:
Hello, a few days ago I deleted a9lh (butnot luma) through decrypt9, I forgot the ctr-transfer part. Now I can't use my 2ds because it shows a black screen when I turn it on. I don't know if files are missing or if I just killed my console. I need more informations so that I could get a clean 2ds or at least a working one.

What do you mean by deleted a9lh?

--------------------- MERGED ---------------------------

Danilo91 said:
I'm stuck in "An old unsupported FIRM has been detected. Copy firmware.bin in / luma to boot."

How can I fix this? I've installed B9s but I don't finsh because of this error.

Nand 4.3.0-10U.

Did you do this? From https://3ds.guide/finalizing-setup

If your device is on a version between 3.0.0 and 4.5.0 (inclusive), your device will not boot until you manually download the required firmware:

Download this file and rename it to firmware.bin

Download this file

Copy firmware.bin and cetk to the /luma/ folder on your SD card

Delete both of these files after updating your device later in these instructions

If you hadn't gotten up to this point yet then you should just follow the guide in order.

AkitoUF · Jun 7, 2017

Read about B9S 1.2 and was just about to update when suddenly

So are they outright telling me not to do the exact thing the page's title telling me to?

kbf · Jun 7, 2017

Hey I got a question:

Should I always try to update the system manually or is it not necessary? or will updating luma and b9s suffice? I was told to always say no when Nintendo prompts an update but it should be safe for me to update manually via system settings?

Quantumcat · Jun 7, 2017

kbf said:
Hey I got a question:

Should I always try to update the system manually or is it not necessary? or will updating luma and b9s suffice? I was told to always say no when Nintendo prompts an update but it should be safe for me to update manually via system settings?

Update through System Settings -> Other Settings -> System Update

Check on the forums to make sure your setup is safe to update. Usually it will be. Updating Luma and b9s is not the same as a system update, but may be necessary in the future for a safe system update (that's why you need to check the forums).

kbf · Jun 7, 2017

Quantumcat said:
Update through System Settings -> Other Settings -> System Update

Check on the forums to make sure your setup is safe to update. Usually it will be. Updating Luma and b9s is not the same as a system update, but may be necessary in the future for a safe system update (that's why you need to check the forums).

Where specifically? where can I usually find important announcements incase of stuff like this?

Quantumcat · Jun 7, 2017

kbf said:
Where specifically? where can I usually find important announcements incase of stuff like this?

There will usually be a thread in both the homebrew and CFW forums. In the homebrew forums a guy with a pink avatar, possibly Kirby (can't remember his name) will make a thread called "11.5 and Homebrew" with what stuff is patched and what stuff still works, and somebody will make a thread in the CFW forum announcing the update, there will be a lot of discussion, and the main post will stay updated with what the impact is on CFW like if you need to update anything or if it is safe. It could be a good idea to wait 1-3 days before updating so there is a consensus on what is safe.

79TAKid · Jun 7, 2017

Wasnt there a thread about the recent bans? I thought I saw it the other day but cant find it now. Just trying to check and find info about it. I've had my 3ds connected to the wifi but havent ever even played any games online lol

superj1018 · Jun 7, 2017

79TAKid said:
Wasnt there a thread about the recent bans? I thought I saw it the other day but cant find it now. Just trying to check and find info about it. I've had my 3ds connected to the wifi but havent ever even played any games online lol

There hasn't been any reports of new bans for over a week now so you're safe for now

LUCIFXR · Jun 7, 2017

Is there a way to verify if I successfully updated my B9S and Luma version?

KunoichiZ · Jun 7, 2017

LUCIFXR said:
Is there a way to verify if I successfully updated my B9S and Luma version?

Press Select when you boot your system. If you see Luma3DS v8.0, you've successfully installed b9s v1.2 and Luma v8.0.

Quantumcat · Jun 7, 2017

LUCIFXR said:
Is there a way to verify if I successfully updated my B9S and Luma version?

Hold Select on boot, if it says Luma 8.0 and you get the home menu after pressing Start, then you managed to update.

Edit: ninja'd

steffy · Jun 7, 2017

Quantumcat said:
What do you mean by deleted a9lh?

I turned my 2ds on while pressing start then selected "remove a9lh". I can't remember the words exactly but that was the exploit used to install luma. I also deleted every file on my sd card (replacing the doesn't fix the problem).

Black screen, blue led. I hope I don't have to hardmod.

LUCIFXR · Jun 7, 2017

KunoichiZ said:
Press Select when you boot your system. If you see Luma3DS v8.0, you've successfully installed b9s v1.2 and Luma v8.0.

Quantumcat said:
Hold Select on boot, if it says Luma 8.0 and you get the home menu after pressing Start, then you managed to update.

Edit: ninja'd

Thanks guys! It was updated successfully.

Hacking 3DS NOOB PARADISE - Ask questions here

Im Aware ... Im Unaware

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Member

The Temp's cynic.

Dead and alive

Well-Known Member

Well-Known Member

Dead and alive

Well-Known Member

Dead and alive

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Dead and alive

Member

Well-Known Member

Similar threads

Popular threads in this forum