This does work sometimes. But definitely not Very much. Yes sometimes it needs to be refreshed but that only works sometime. I could exit out 10 times in a row and the memory is gone still. I'm talkin lets say you have 280/295. You put 10mb game on and have 290/295. Then you take it off and watch it change to 280/294 now or 293.5. Exit out and get back in and it does not change. Then lets say I wanna add a mod so now it lowers the 294 to like 292 depending on mod. Then i take it off and now I have 291 instead of 294. I can restart a refresh hakchi to get my full 344.7 again. But same thing will always happen when you start trying games and.mods and taking them right back off. My limit shouldn't ever change unless I add mods.
Last edited by youngtune27,
when using the " helping hand " why did my game count go down? It seamed like it didnt count the nes games any more They are still in the list tho
google "atari age" for somemore info.
Stella is the core you need, found it on pcm720 github (google pcm 720 github)
@bigjdoberman & @ByteThis,
Right now i am trying Cologne.
https://www.zophar.net/consoles/gameboy/coleco/cologne.html
If you run it, you can add a Coleco game and a bios, then Cologne makes it GBA game, which would run on RetroArch
EDIT:
Only after installing the MGBA core, i managed to run the Coleco games, finally !!!
I might be the first ;-)
All you need is Cologne, a Coleco bios and a file.
It is also possible to put all the games into 1 GBA file and run that...it is a emulator inside a emulator.
Don't expect the top sound of the Coleco ;-) it is a somewhat high pitched sound, and the graphics are not that great, but it runs !!!
Right now i am trying Cologne.
https://www.zophar.net/consoles/gameboy/coleco/cologne.html
If you run it, you can add a Coleco game and a bios, then Cologne makes it GBA game, which would run on RetroArch
EDIT:
Only after installing the MGBA core, i managed to run the Coleco games, finally !!!
I might be the first ;-)
All you need is Cologne, a Coleco bios and a file.
It is also possible to put all the games into 1 GBA file and run that...it is a emulator inside a emulator.
Don't expect the top sound of the Coleco ;-) it is a somewhat high pitched sound, and the graphics are not that great, but it runs !!!
Last edited by Mad-Mega,
Nice find !! Thanks bro!! I read about a workaround using gba..what is the bios that needs to be used for it? Is it the colecovisionbios(original)(1982) ? I had that one downloaded to used if I could use colecovision..
I found this online also, Colem :
As well as this for Coleco :
I found this online also, Colem :
Code:
https://fms.komkon.org/ColEm/As well as this for Coleco :
Code:
https://www.zophar.net/coleco.html
Last edited by ByteThis,
Dose the hakchi helping hand work ?? It seams to just delete my nes games. Or dose it take along time ? Kind of confussed by how it works or even if it dose
Hello guys! Question; how do you make a particular button setting for a specific core in retroarch the default button combination? Like for example, I wanted to set a default button setting for the Sega Genesis emulator in retroarch, so that all games I add in my NES Mini would follow/use that default button setting for both player 1 & 2. I know you can remap the buttons via the quick menu, but I wanted to make a default button setting across all games. How do you do that? Thank you in advance!
that is just when the counter bugs out and stops counting. When that happens you just restart hakchi and the counter will be accurate again.
If I'm not mistaken, after having remapped the buttons as you wished, should choose to "Save as Core Map" instead of "Save as Game Map" (not sure about the wordings but you get my point
). The options are next to one another. EDIT: "All games" refer to all games that use that particular hmod/emulator.
Last edited by maande80,
The bios inside the Colem zip will work, it should be the same 8kb bios.
Just load Cologne, add a game, than click on more, click on bios, than add the bios, do not click on "BIOS games" or on "Use PAL timing", add a title in the top and press save, do not overwrite cologne.gba, just give it the title of the game.
Install the MGBA hmod, and than add the games, they should run, the buttons work, but i think the keypad doesn't, so games like Mousetrap will work but you cannot open the yellow,red,blue doors or transform into a dog ;-)
Bin works just fine for me with Stella, just make sure you change the command line for as such; bin/a26 /.........
So still no one has figured out a core for C64 games? Cause Ill admit, that could make this lil guy complete for gaming with anyone.
If I'm not mistaken, after having remapped the buttons as you wished, should choose to "Save as Core Map" instead of "Save as Game Map" (not sure about the wordings but you get my point
EDIT: "All games" refer to all games that use that particular hmod/emulator.
Oh cool!! Thank you so much dude!! I'll try it later and let you guys know if it works. Thanks again!
Okay, so apparently, the way it works is:
- After setting up your controls under the CONTROL menu, make sure you select "Save Core Remap File"
- Then go back to the QUICK MENU window and select "Save Core Overrides"
That should make your current button config the default button config for all games under that one emulator core.
- After setting up your controls under the CONTROL menu, make sure you select "Save Core Remap File"
- Then go back to the QUICK MENU window and select "Save Core Overrides"
That should make your current button config the default button config for all games under that one emulator core.
Similar threads
-
- Portal
-
Xdqwerty
what are you looking at? -
Sonic Angel Knight
-
BakerMan
The snack that smiles back, Ballsack!
-
-
-
-
@
SylverReZ:
@Psionic Roshambo, The Doom NES cartridges, a few batches were made. One was given to AVGN as seen in his Doom video.+1 -
-
@
Sicklyboy:
I finally modeled and 3d printed the new HDD cages I need in order to build my 2nd NAS. Original ones don't fit the mounting holes on the hdds I'm using. Been sitting on this project for over 2 years smfh -
-
@
Sicklyboy:
I'm finally gonna get this NAS racked and powered on tonight, install truenas core, and burn the disks in with badblocks
-
@
Sicklyboy:
Also another 70TB going in the front mount drive bays of this server. 182tb raw, going to probably use a zfs RAID-Z3 for 3 parity disks, so 140TB usable
-
@
Sicklyboy:
I could claw back 14tb by only doing 2 parity disks but I feel like with 13 disks in the RAID I'd be kind of pushing my luck on rebuild time if I encounter a disk failure
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
