Homebrew [Discontinued] TWLoader - CTR-mode NDS app

RocketRobz · Feb 28, 2017

absol20 said:
I'm using a DSTT and this worked for me as well. But I can only run the games by going through add games, they aren't added to the TWLoader menu for me to select when I open up TWloader

Are the .ini files saved in "sd:/roms/flashcard/nds/"?

absol20 · Feb 28, 2017

Robz8 said:
Are the .ini files saved in "sd:/roms/flashcard/nds/"?

No they aren't there

RocketRobz · Feb 28, 2017

absol20 said:
No they aren't there

Is the INI path specified in the settings screen?

absol20 · Feb 28, 2017

@Robz8 No, the rom path is specified

absol20 · Feb 28, 2017

Robz8 said:
Is the INI path specified in the settings screen?

When I first open the settings screen it shows the ROM path.

I also searched for .ini files on the sd card but none of the ones that showed up were for the games

RocketRobz · Feb 28, 2017

absol20 said:
When I first open the settings screen it shows the ROM path.

I also searched for .ini files on the sd card but none of the ones that showed up were for the games

Did you press A on the ROM path?

absol20 · Feb 28, 2017

Robz8 said:
Did you press A on the ROM path?

Yes, when I do the SD Rom location is SD:/roms/nds and the Flashcard INI location is SD:/roms/flashcard/nds

RocketRobz · Feb 28, 2017

absol20 said:
Yes, when I do the SD Rom location is SD:/roms/nds and the Flashcard INI location is SD:/roms/flashcard/nds

So the .ini files aren't created. Strange.

absol20 · Feb 28, 2017

Robz8 said:
So the .ini files aren't created. Strange.

Yep, that's what it seems like. Any ideas for what I could do to fix it?

I can still play nds games and save them so it still works in general.

gilx · Feb 28, 2017

I have a dstwo card, that i get an error screen when i try to just boot from the 3ds main screen(it works on my old NDS) i have firmware 11.3 so i presume somethings up and it's been blocked, When i try to add game with it thru TWloader it just goes black, I've follow the instructions but i just can't get it to work, Im presuming it's because the card wont boot anymore normally. Using Luma etc

EDIT :- Even trying to boot from SD card i get a black screen on known good roms (super mario 64 DS) I've looked at the black screen fix thing in Luma and i have no SVCbreak , Not really sure what to do now!

Broch · Mar 1, 2017

Edit: Got it working.

RocketRobz · Mar 1, 2017

gilx said:
I have a dstwo card, that i get an error screen when i try to just boot from the 3ds main screen(it works on my old NDS) i have firmware 11.3 so i presume somethings up and it's been blocked, When i try to add game with it thru TWloader it just goes black, I've follow the instructions but i just can't get it to work, Im presuming it's because the card wont boot anymore normally. Using Luma etc

EDIT :- Even trying to boot from SD card i get a black screen on known good roms (super mario 64 DS) I've looked at the black screen fix thing in Luma and i have no SVCbreak , Not really sure what to do now!

Try the black screen fix in the FAQs.

toomanyluigis · Mar 1, 2017

is there an option to stretch the top screen to fit?

adrifcastr · Mar 1, 2017

toomanyluigis said:
is there an option to stretch the top screen to fit?

you'd need to hack TWL_FIRM

EpioZyto · Mar 1, 2017

So, I have a little problem. I think TWLoader broke my luma and emunand.
I left my 3DS on while looking up missing covers for my roms i edited them down and made their names the necessary names for the games, as i did this my 3DS had TWLoader open as reference material to which game covers were missing. after i was done i wanted to turn my 3DS off, i went into the Home Menu ended the application and it froze. I shutdown my 3DS and transferred the covers over. I put the SD Card back into my 3DS and started it. It went through the normal procedure but after the red bottom screen the screens were just black. I tried the "I get a black screen on boot" fix from the Luma3DS wiki but i didn't get any indication of an svcBreak in the loader process because there was no error display. I copied the loader.cxi into the sysmodules folder in Luma but it still doesn't work. Before this i used the "I get an auto-shutdown with GBA/DS/DSiWare games" fix but i restarted a few times after that and it worked just fine. Also in TWLoader all the games froze on a White screen after the Nintendo DS Logo. I don't know what to do so if you can please help me.

RocketRobz · Mar 1, 2017

EpioZyto said:
So, I have a little problem. I think TWLoader broke my luma and emunand.
I left my 3DS on while looking up missing covers for my roms i edited them down and made their names the necessary names for the games, as i did this my 3DS had TWLoader open as reference material to which game covers were missing. after i was done i wanted to turn my 3DS off, i went into the Home Menu ended the application and it froze. I shutdown my 3DS and transferred the covers over. I put the SD Card back into my 3DS and started it. It went through the normal procedure but after the red bottom screen the screens were just black. I tried the "I get a black screen on boot" fix from the Luma3DS wiki but i didn't get any indication of an svcBreak in the loader process because there was no error display. I copied the loader.cxi into the sysmodules folder in Luma but it still doesn't work.

TWLoader did not break your Luma or EmuNAND. If you're using MenuHax, it's normal for Luma to not start EmuNAND sometimes.

EpioZyto said:
Before this i used the "I get an auto-shutdown with GBA/DS/DSiWare games" fix but i restarted a few times after that and it worked just fine. Also in TWLoader all the games froze on a White screen after the Nintendo DS Logo. I don't know what to do so if you can please help me.

The current version of TWLoader does not start the official release bootstrap for some reason. In TWLoader settings, update the unofficial bootstrap, then set Bootstrap to unofficial.

EpioZyto · Mar 1, 2017

Robz8 said:
If you're using MenuHax, it's normal for Luma to not start EmuNAND sometimes.

It's just a bit weird because i tried to start it about 20 times and it didn't work

Robz8 said:
The current version of TWLoader does not start the official release bootstrap for some reason. In TWLoader settings, update the unofficial bootstrap, then set Bootstrap to unofficial.

My settings are ARM9 CPU Speed 133mhz, VRAM boost is on, bootscreen is on DS but it uses the DSi bootscreen and DSi uses no bootscreen, Reset slot-1 is on, Console output is on, Lock ARM9 SCFG_EXT is off and Bootstrap is unofficial (yes i updated the unofficial bootstrap) and it still gets stuck on a white screen. Also the console output gives me "Please insert a Cartridge..." is that normal?

umbjolt · Mar 1, 2017

Robz8 said:
The current version of TWLoader does not start the official release bootstrap for some reason. In TWLoader settings, update the unofficial bootstrap, then set Bootstrap to unofficial.

Maybe that is related about the PR's trying to get TWLoader works out-of-the-box with pre-configured parameters

RocketRobz · Mar 1, 2017

EpioZyto said:
It's just a bit weird because i tried to start it about 20 times and it didn't work

My settings are ARM9 CPU Speed 133mhz, VRAM boost is on, bootscreen is on DS but it uses the DSi bootscreen and DSi uses no bootscreen, Reset slot-1 is on, Console output is on, Lock ARM9 SCFG_EXT is off and Bootstrap is unofficial (yes i updated the unofficial bootstrap) and it still gets stuck on a white screen. Also the console output gives me "Please insert a Cartridge..." is that normal?

No. You have an outdated TWLNAND side.

elcoteinki · Mar 1, 2017

hello
get me white screen when start the flashcard
M3 ds real

Homebrew [Discontinued] TWLoader - CTR-mode NDS app

Stylish TWiLight Hero

Member

Stylish TWiLight Hero

Member

Member

Stylish TWiLight Hero

Member

Stylish TWiLight Hero

Member

Member

Member

Stylish TWiLight Hero

Member

Well-Known Member

Active Member

Stylish TWiLight Hero

Active Member

Wild jolteon

Stylish TWiLight Hero

New Member

Similar threads

Popular threads in this forum