Hacking Not running from A9LH, but FIRM0 corrupted

autism4n · Feb 9, 2017

Majickhat55 said:
Maybe the previous user installed A9LH and never Uninstalled it, just cleared the SD card. Have you tried running a payload?

if a9lh is never Uninstalled, its shown @decrypt9 and system info "Running from arm9loaderhax:yes"?
but this case or 3ds "Running from arm9loaderhax:no" and cannot call payload + luma config
can anyone help ashitaka20 & me
im not try sysupdater yet, i have 1 3ds 9.2U(not reg change) with this problem and 2x 11.2 (reg change JAP->US)
tq

Majickhat55 · Feb 9, 2017

autism4n said:
if a9lh is never Uninstalled, its shown @decrypt9 and system info "Running from arm9loaderhax:yes"?
but this case or 3ds "Running from arm9loaderhax:no" and cannot call payload + luma config
can anyone help ashitaka20 & me
im not try sysupdater yet, i have 1 3ds 9.2U(not reg change) with this problem and 2x 11.2 (reg change JAP->US)
tq

Because you're loading it through fasthax, not an A9LH payload. That's why I suggested trying the payloads to see if you already had it. "Fix your FIRM0 or run from A9LH" is basically confirming you have it......

ashitaka20 · Feb 9, 2017

If I power on with sd with luma, I can enter in luma setting when press start and power on. If I go to settings in 3DS I can see that I am in luma.

Bu2d85 · Feb 9, 2017

Then you already have a9lh installed. Go to the guide and continue from section V on the link below to inject FBI. Later if you feel like it you can look into updating a9lh but its not necessary.

https://3ds.guide/installing-arm9loaderhax

JerryShaw · Feb 9, 2017

Could you replace the arm9loaderhax.bin with some other one from ctrbootmanager or decrypt9 or emunand9 or anyone not a cfw, if reboot leads you to a new menu, you already have a9lh installed.

urherenow · Feb 10, 2017

To manually install any system file, you need to get a .cia of that file. You install it with a .cia manager. FBI is my goto. I haven't had to do this in ages, but in the past, I would come across a .cia that FBI refused to install, and in that case, I used devmenu / bigbluemenu.

But... this thread is now confusing me. I'm not sure if you have a9lh installed or not.

gkoelho · Feb 10, 2017

I think your firm0 slot is dead. Hence why trying to brute force an al9h installation ends in a brick(because it needs the firm0 data to load the payload or otherwise is just trash data).

autism4n · Feb 10, 2017

urherenow said:
To manually install any system file, you need to get a .cia of that file. You install it with a .cia manager. FBI is my goto. I haven't had to do this in ages, but in the past, I would come across a .cia that FBI refused to install, and in that case, I used devmenu / bigbluemenu.

But... this thread is now confusing me. I'm not sure if you have a9lh installed or not.

i can injected HS+FBI but i cant call LUMA Config cant access payload, in didn know if a9lh installed or not because i buy 2nd hand
tq

Alex658 · Feb 10, 2017

What version is your 3ds currently into? Can you let us know?

Try the payloads as others suggested.
Download luma's "arm9loaderhax.bin" from http://3ds.guide and put it on the ROOT of your sdcard.
Hold select while you press the power button and tell us what happened.

autism4n · Feb 10, 2017

Alex658 said:
What version is your 3ds currently into? Can you let us know?

Try the payloads as others suggested.
Download luma's "arm9loaderhax.bin" from http://3ds.guide and put it on the ROOT of your sdcard.
Hold select while you press the power button and tell us what happened.

1 3ds USA 9.2.0-20U corrupted firm0 cannot ctr 2.1 transfer, i already put folder luma+arm9loaderhax.bin other payload godmode, decrypt9,hourglass9 and press select to call luma config, but nothing happen just booting to SYSNAND
and 2 more 3ds fw 11.2 U region change from J.
i not new installing cfw in 3ds but this error is make me hopeless =(
hellpppp
hehehe

Alex658 · Feb 10, 2017

Hmmmm. I wonder if installing sysupdater and updating to 11.2 from that would work/correct the firm0 partition.

If it was a bad uninstallation of a9lh (via dgtools) he should have a full brick, not a semi working system...

I suppose you could try to set up menuhax+emunand and have luma that way. But only do it as a last resource if no one else comes up with anything. Your full version is 9.2.0-20U, then?

HyperT · Feb 10, 2017

Would running a 10.4 nfirm cause this error?

Tenshi_Okami · Feb 10, 2017

HyperT said:
Would running a 10.4 nfirm cause this error?

Firm0 is different than Native_Firm

ashitaka20 · Feb 10, 2017

Alex658 said:
What version is your 3ds currently into? Can you let us know?

Try the payloads as others suggested.
Download luma's "arm9loaderhax.bin" from http://3ds.guide and put it on the ROOT of your sdcard.
Hold select while you press the power button and tell us what happened.

In my case, only with arm9loaderhax.bin of LUMA in SD ROOT, appear the config of luma the first power ON. After if I press select also appear this menu.

Alex658 · Feb 10, 2017

ashitaka20 said:
In my case, only with arm9loaderhax.bin of LUMA in SD ROOT, appear the config of luma the first power ON. After if I press select also appear this menu.

Then you have a9lh.
For the payloads go to http://3ds.guide and download hourglass9, emunand9 or any other tools from the guide you might need.

Seeing as you're spanish according to your flag i can give you instructions a bit more precise on your language.
If after pressing SELECT and saving the configuration with START luma still doesn't start up, you have another issue somewhere.
But this would be a great start, download hourglass9.bin and rename it start_hourglass9.bin and put it inside (sd card letter name)//luma/payloads/start_hourglass9.bin

Viendo que eres de origen español según tu bandera puedo darte instrucciones un poco mas precisas en tu idioma.
Si despues de presionar SELECT y darle a START para guardar la configuración de luma aun así no arranca, entonces hay algún otro problema con el 3ds.
Pero esto sería un gran inicio, baja hourglass9.bin y renombralo start_hourglass9.bin y ponlo dentro de la carpeta (Letra de la SD)/luma/payloads/start_hourglass9.bin

ashitaka20 · Feb 10, 2017

Alex658 said:
Then you have a9lh.
For the payloads go to http://3ds.guide and download hourglass9, emunand9 or any other tools from the guide you might need.

Seeing as you're spanish according to your flag i can give you instructions a bit more precise on your language.
If after pressing SELECT and saving the configuration with START luma still doesn't start up, you have another issue somewhere.
But this would be a great start, download hourglass9.bin and rename it start_hourglass9.bin and put it inside (sd card letter name)//luma/payloads/start_hourglass9.bin

Viendo que eres de origen español según tu bandera puedo darte instrucciones un poco mas precisas en tu idioma.
Si despues de presionar SELECT y darle a START para guardar la configuración de luma aun así no arranca, entonces hay algún otro problema con el 3ds.
Pero esto sería un gran inicio, baja hourglass9.bin y renombralo start_hourglass9.bin y ponlo dentro de la carpeta (Letra de la SD)/luma/payloads/start_hourglass9.bin

I'm going to use a little Spanish xD. Many thanks @ Alex658, how would you know if I have run luma correctly? If I go into options to see the version of the system, it appears in front of SYSxxx, that is to say the configuration has saved it correctly and I execute it without problems. What I wanted to do is create an emunand not to touch the nand and thus forget to install the A9HL (I wanted to have it installed just in case). Thank you very much again.

Voy a usar un poquito el español xD. Muchas gracias @Alex658, cómo sabría si me ha ejecutado luma correctamente? Si me meto en opciones para ver la versión del systema, aparece delante SYSxxx, es decir la configuración la ha guardado correctamente y me la ejecuta sin problemas. Lo que quería hacer es crear una emunand para no tocar la nand y así olvidarme de instalar el A9HL (quería tenerlo instalado por si acaso). Muchas gracias de nuevo.

Alex658 · Feb 10, 2017

ashitaka20 said:
I'm going to use a little Spanish xD. Many thanks @ Alex658, how would you know if I have run luma correctly? If I go into options to see the version of the system, it appears in front of SYSxxx, that is to say the configuration has saved it correctly and I execute it without problems. What I wanted to do is create an emunand not to touch the nand and thus forget to install the A9HL (I wanted to have it installed just in case). Thank you very much again.

Voy a usar un poquito el español xD. Muchas gracias @Alex658, cómo sabría si me ha ejecutado luma correctamente? Si me meto en opciones para ver la versión del systema, aparece delante SYSxxx, es decir la configuración la ha guardado correctamente y me la ejecuta sin problemas. Lo que quería hacer es crear una emunand para no tocar la nand y así olvidarme de instalar el A9HL (quería tenerlo instalado por si acaso). Muchas gracias de nuevo.

That would be correct, if SYS appears in front of the System Version i.e. Sys 11.2.0-35U that means you're running luma from a9lh and have ticked the option "show current nand in system settings" in the luma configuration screen.
You could create an EMUNAND, but that would be "wasting" 1gb of storage, you can achieve the same thing by making a NAND backup (you should do this anyway) of the console in your current state. So download the payloads i told you and i'll let you know how to make the backup.

Eso seria correcto, Si SYS aparece delante de tu versión de sistema algo como Sys 11.2.0-35U eso significaría que estas corriendo luma desde a9lh y tienes activada la opcion que te permite verlo. "show current nand in system settings" en el menu de configuración de luma.

Puedes crear una emunand, pero seria gastar 1gb de espacio cuando puedes lograr lo mismo haciendo un NAND backup de la consola (deberias hacer esto de todas maneras asi decidas usar la emunand) en tu estado actual, asi puedes volver siempre al punto donde estas ahorita).
Bajate los payloads que te indique y te digo como hacer el backup.

ashitaka20 · Feb 10, 2017

Hi, I have just put start_hourglass9.bin inside payloads and create a complete nand backup with decrypt9 (I can open this with fasthax an then with safehax).

Alex658 · Feb 10, 2017

ashitaka20 said:
Hi, I have just put start_hourglass9.bin inside payloads and create a complete nand backup with decrypt9 (I can open this with fasthax an then with safehax).

No...
You should NOT open those via safehax/fasthax.
From now on you should get into hourglass9 by holding the start button when you press power.

Don't use decrypt9 unless you know what you're doing. If you mess up you can end up losing a9lh and all hacks, you should use hourglass9 that protects a9lh so you don't lose it.
Hourglass9 is the safemode version of decrypt9.

No...
No deberias abrir los payloads desde safehax/fasthax
De ahora en adelante deberias poder entrar a hourglass9 al mantener presionado el boton START y luego darle al boton de encendido.

No uses decrypt9 si no sabes que estas haciendo del todo, si te equivocas al restaurar el backup puedes terminar perdiendo a9lh!
usa hourglass9 que protege que no pierdas a9lh.
Hourglass9 es la version de modo seguro de decrypt9.

ashitaka20 · Feb 10, 2017

Alex658 said:
No...
You should NOT open those via safehax/fasthax.
From now on you should get into hourglass9 by holding the start button when you press power.

Don't use decrypt9 unless you know what you're doing. If you mess up you can end up losing a9lh and all hacks, you should use hourglass9 that protects a9lh so you don't lose it.
Hourglass9 is the safemode version of decrypt9.

No...
No deberias abrir los payloads desde safehax/fasthax
De ahora en adelante deberias poder entrar a hourglass9 al mantener presionado el boton START y luego darle al boton de encendido.

No uses decrypt9 si no sabes que estas haciendo del todo, si te equivocas al restaurar el backup puedes terminar perdiendo a9lh!
usa hourglass9 que protege que no pierdas a9lh.
Hourglass9 es la version de modo seguro de decrypt9.

Ok sin problemas, no sabía la diferencia entre uno y otro, de todas formas conozco la base para poder instalar el A9LH. Ya tengo la copia exa y estoy dentro de hourglass9.

Ok no problem, I did not know the difference between one and the other, anyway I know the basis for installing the A9LH. I already have the exa copy and I am inside hourglass9.

Hacking Not running from A9LH, but FIRM0 corrupted

Member

The Red Woman

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Similar threads

Popular threads in this forum