Hacking 3DS NOOB PARADISE - Ask questions here

keine · Jan 24, 2017

Just wanted to say that booting into Decrypt9 from Luma using a decrypt 9 payload in the luma/payloads folder and holding start worked a treat.
From there I was able to reflash the sysnand with a nand minimal backup I made while installing CFW.
Thanks for the help.

Jank77 · Jan 24, 2017

Hello, im at the end of this tutorial: https://github.com/Plailect/Guide_RedNAND/wiki/Part-5-(arm9loaderhax) (i know its an old tutorial)
Im on section VI 9.
I have to open Health and Safety but the FBI isnt injected. What can i do?

Thanks

YyAoMmIi · Jan 24, 2017

Jank77 said:
Hello, im at the end of this tutorial: https://github.com/Plailect/Guide_RedNAND/wiki/Part-5-(arm9loaderhax) (i know its an old tutorial)
Im on section VI 9.
I have to open Health and Safety but the FBI isnt injected. What can i do?

Thanks

why are you using an old guide on purpose then?

Solution: did you inject FBI into your H&S app? remember doing that in WIPdecrypt9 ?

Jank77 · Jan 24, 2017

YyAoMmIi said:
why are you using an old guide on purpose then?

Solution: did you inject FBI into your H&S app? remember doing that in WIPdecrypt9 ?

Im using old Guide because i starter 2 months ago.

Yes i did this before downgrading to FW 2.1.
But now at cfw sysnand (i hope this is right) there ist no fbi on THW Health App.

YyAoMmIi · Jan 24, 2017

Jank77 said:
Im using old Guide because i starter 2 months ago.

Yes i did this before downgrading to FW 2.1.
But now at cfw sysnand (i hope this is right) there ist no fbi on THW Health App.

Pretty sure 3ds.guide was out since before Nov.

Wait, sysnand?
what was your set up before everything? Sysnand+emunand?
in anycase, can you load into WIPDecrpt9 using the Luma payload commands? (Holding start/select while turning on 3ds)

Jank77 · Jan 24, 2017

YyAoMmIi said:
Pretty sure 3ds.guide was out since before Nov.

Wait, sysnand?
what was your set up before everything? Sysnand+emunand?
in anycase, can you load into WIPDecrpt9 using the Luma payload commands? (Holding start/select while turning on 3ds)

I think you are right that is was out since before November

Yes Sysnand+emunand.

I can boot into hourglass9, luma settings, etc but how do i go in wipdecrypt9?

YyAoMmIi · Jan 24, 2017

Jank77 said:
I think you are right that is was out since before November

Yes Sysnand+emunand.

I can boot into hourglass9, luma settings, etc but how do i go in wipdecrypt9?

I think that depends on your payload buttons (check in your luma setting)
You can also use hourglass9.

Jank77 · Jan 24, 2017

YyAoMmIi said:
I think that depends on your payload buttons (check in your luma setting)
You can also use hourglass9.

Yeah i got it with hourglass9. Thanks

keine · Jan 24, 2017

Are there backups of the old 3DS guides anywhere.

I had followed an older tutorial....and then I got confused I couldn't find elements I had originally referenced.
Such as had I used Decryp9 or other.

Also. Do the newer 3DS XL (Galaxy) have better build quality then Red/Blue?
Hinges?

ernestswitch · Jan 24, 2017

deleted

YyAoMmIi · Jan 24, 2017

ernestswitch said:
Several questions. They are a bit ambitious for someone at my level (basically level 0), but I am very stubborn and like problems fixed. I have a 3ds on me that has no access to common exploits like a browser, qr code reader, and there is no otherapp file for it. It is frankenfirmware and nothing works.

First of all, is otherapp open source?? Could I alter an existing version to work for my frankenfirmware? I have no coding experience. Where would I start?

Next, would it be possible to write a working script that forces the 3ds into downgrading, but that the 3ds reads as a game? Basically, the only thing that works on this 3ds is opening games. Would it be possible to trick an old 3ds into thinking a script is a game, without using common exploits?? Do they sell blank cartriges you could code something like that into? How would you go about this, and what programming language would you use?

TBH, why bother with all that work?
3ds.guide works on latest firmware to my knowledge since 11.2 is still latest.
and frankenfirmware can be fixed via system update.

ernestswitch · Jan 24, 2017

YyAoMmIi said:
TBH, why bother with all that work?
3ds.guide works on latest firmware to my knowledge since 11.2 is still latest.
and frankenfirmware can be fixed via system update.

If you read the thread I have on it, you will see that typical fixes like that have not worked.

https://gbatemp.net/threads/please-help-stuck-on-frankenfirmware-11-0-0-4u.458482/

Why bother?? I guess because it sounds like fun.

Arubaro · Jan 24, 2017

ernestswitch said:
If you read the thread I have on it, you will see that typical fixes like that have not worked.

https://gbatemp.net/threads/please-help-stuck-on-frankenfirmware-11-0-0-4u.458482/

Why bother?? I guess because it sounds like fun.

Did you tried soundhax for 11.0?
If not for 11.0, maybe for the version you where downgrading to?

Edit: maybe updating with a cart?
I think Pokemon sun/moon have 11.0 updates

garbanzox · Jan 24, 2017

Can someone please point me to a guide for backing up my eshop purchases to CIA files. I'm running an N3DS with A9LH and Luma.

Thanks!

Quantumcat · Jan 24, 2017

garbanzox said:
Can someone please point me to a guide for backing up my eshop purchases to CIA files. I'm running an N3DS with A9LH and Luma.

Thanks!

You can use Decrypt9.

Amani · Jan 24, 2017

Feed Mii keeps force shutting Streetpass Mii Plaza...

LunarXDiviner · Jan 25, 2017

A while ago I upgraded my setup to running Luma 3DS with emunand, but I declined to install a9lh at the time. Now that I want to, it seems the guide has changed to include things I haven't heard of- what's the easiest way to install a9lh to autoboot luma?
I'm only interested because it seems it's required for running gba cias? I tried some emulator cias but they run under 30fps for me (on old 3ds).

Arubaro · Jan 25, 2017

LunarXDiviner said:
A while ago I upgraded my setup to running Luma 3DS with emunand, but I declined to install a9lh at the time. Now that I want to, it seems the guide has changed to include things I haven't heard of- what's the easiest way to install a9lh to autoboot luma?
I'm only interested because it seems it's required for running gba cias? I tried some emulator cias but they run under 30fps for me (on old 3ds).

I think you can play gba cias with emunand, but you need to install them on both emunand and sysnand, that's one of the reasons it's recommended to use a9lh and use only sysnand (this way you only install them once, on sysnand)

In the guide. select your 3ds' model and the fw of your sysnand.
Almost at the end of the guide, you'll be able to restore the content of your emunand into your sysnand so you'll not lose nothing

zazazas · Jan 25, 2017

deleted

onitaku · Jan 25, 2017

Well, it's my first post in gbatemp, but I've read from you a long time ago.
My problem is reduced to the error: "There was an error in forcing the software to close, the system will restart (unsaved data can be lost)".

I have tried to format the microsd, format the console and update a9lh, but the error persists ...

I have the error dump that occurred playing Dragon Quest VIII official of the Eshop of Nintendo and the photo of the following error in the console:

I've attached the dump in case anyone knows what to do with it.
Regards.

Hacking 3DS NOOB PARADISE - Ask questions here

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Soulspace Guardian

Well-Known Member

Dead and alive

Someone who wants to get banned

Well-Known Member

Soulspace Guardian

New Member

New Member

Attachments

Similar threads

Popular threads in this forum