Homebrew Nintendo Upgraded new 3ds to 11.0 now what?

retrofan_k · Jun 14, 2016

Emeraldman94 said:
So I had a 9.2 New 3ds that had a broken C Stick. I had menuHAX and all of my emuNAND on my SD card which I removed. I wiped my data and I sent it in to nintendo and they repaired it and sent it back to me. But unfortunately they upgraded to 11.0.

Im pretty upset. But Im trying to figure out what I have to do to be able to load up my Gateway Card and Luma 3ds CFW. Are my only hopes right now the SSB Beacon HAX and freakyform? If I am on 11.0 I can load up that exploit then from the HBL load my gateway Homebrew or Luma 3DS?

If you had a warranty or not, you should not have sent it to Nintendo, if you cared about keeping an exploitable system. For something like a broken C stick, you could have got it repaired by someone (store) or something. Right now you are limited to 11.0 EDIT: and no (Arm9/11) kernel access, as they patched the downgrading, so basically keep it for homebrew by using Freakforms or SKY3ds with the rom, yet be prepared to pay SCALPED prices for a retail Freaky cart, if unlucky enough to find a cheapo one somewhere. GW will not work on 11.0 either, so you're screwed.

Other option, is sell it and buy a 10.xx console and go from there, as 11.0 downgrading/arm9/arm11 access won't be anytime soon imo.

hacksn5s4 · Jun 14, 2016

retrofan_k said:
If you had a warranty or not, you should not have sent it to Nintendo, if you cared about keeping an exploitable system. For something like a broken C stick, you could have got it repaired by someone (store) or something.

Right now you are limited to 11.0 (Arm11) access and no (Arm9) kernel access, as they patched the downgrading, so basically keep it for homebrew by using Freakforms or SKY3ds with the rom, yet be prepared to pay SCALPED prices for a retail Freaky cart, if unlucky enough to find a cheapo one somewhere.

Other option, is sell it and by a 10.xx console and go from there, as 11.0 downgrading/arm9 access won't be anytime soon imo.

11.0 has no arm 11 access as well thats why you cannot downgrade from it

retrofan_k · Jun 14, 2016

yeah, just seen a I wrote that LOL. Oh. well, OP is screwed really being 11.0 that was my main point

hacksn5s4 · Jun 14, 2016

he can buy a new system

vb_encryption_vb · Jun 14, 2016

hacksn5s4 said:
he can buy a new system

Cheaper to hardmod.

Psi-hate · Jun 14, 2016

>no arm11 kernel access

lol sure

hacksn5s4 · Jun 14, 2016

vb_encryption_vb said:
Cheaper to hardmod.

I bet you could just use some electrical tape some wires from an internet cable and sd adapter and an sd reader those could be house hold items for you just to restore its nand back up

Psi-hate · Jun 14, 2016

hacksn5s4 said:
I bet you could just use some electrical tape some wires from an internet cable and sd adapter and an sd reader those could be house hold items for you just to restore its nand back up

Just no.

hacksn5s4 · Jun 14, 2016

well it works temporally but if you want a permanent hard mod you need to solder

Tenshi_Okami · Jun 14, 2016

hacksn5s4 said:
electrical tape

I don't think that's how a hard mod works buddy ;~;

hacksn5s4 · Jun 14, 2016

Tenshi_Okami said:
I don't think that's how a hard mod works buddy ;~;

it does just electrical tape the wires where you would solder them

Tenshi_Okami · Jun 14, 2016

hacksn5s4 said:
it does just electrical tape the wires where you would solder them

If it was that easy, everyone on 11.0 would had already downgraded and never paid for a hardmod

hacksn5s4 · Jun 14, 2016

Tenshi_Okami said:
If it was that easy, everyone on 11.0 would had already downgraded and never paid for a hardmod

well it is possible like as long as the wires touching the solder points where it should it it should be fine you just need to make sure the wires don't move so you use electrical tape for that

Tenshi_Okami · Jun 14, 2016

hacksn5s4 said:
well it is possible like as long as the wires touching the solder points where it should it it should be fine you just need to make sure the wires don't move so you use electrical tape for that

What if it moves? You will basically have paperweight, plus I'm sure it isn't that easy to do a "temphardmod"

hacksn5s4 · Jun 14, 2016

Tenshi_Okami said:
What if it moves? You will basically have paperweight, plus I'm sure it isn't that easy to do a "temphardmod"

well have the console disassembled with the wires touchting then restore the nand back up

Psi-hate · Jun 14, 2016

It's like using glue. You're not going to get a powerful enough connection to do anything. You'd need a conductive adhesive.

hacksn5s4 · Jun 14, 2016

eh can just get a soldering iron and do that and learn how to solder

gnmmarechal · Jun 14, 2016

a_running_pir8 said:
Just making sure the dude doesn't go and try and flash an old nand is all. Chances are if he came on here asking for help and everyone just yells "hardmod!" that he might try it.

hum, the hardmod would allow him to downgrade NATIVE_FIRM without a previous NAND backup. Just saying.

--------------------- MERGED ---------------------------

hacksn5s4 said:
11.0 has no arm 11 access as well thats why you cannot downgrade from it

Nope. That's a minor reason. The biggest reason for no software-based downgrades on 11.0 is the minimum-version check, which doesn't allow you to install older titles. Even if we had an ARM11 kernel exploit, we wouldn't be able to downgrade via software on 11.0. To bypass the check we'd need an ARM9 exploit, rendering any downgrade useless (except for people who want to downgrade to 2.1.0 for the OTP)

hundshamer · Jun 14, 2016

retrofan_k said:
If you had a warranty or not, you should not have sent it to Nintendo, if you cared about keeping an exploitable system. For something like a broken C stick, you could have got it repaired by someone (store) or something. Right now you are limited to 11.0 EDIT: and no (Arm9/11) kernel access, as they patched the downgrading, so basically keep it for homebrew by using Freakforms or SKY3ds with the rom, yet be prepared to pay SCALPED prices for a retail Freaky cart, if unlucky enough to find a cheapo one somewhere. GW will not work on 11.0 either, so you're screwed.

Other option, is sell it and buy a 10.xx console and go from there, as 11.0 downgrading/arm9/arm11 access won't be anytime soon imo.

Another two options. One is a hardmod and the plaintext downgrade. The other is to send it to someone who can do the plaintext downgrade.

hacksn5s4 said:
I bet you could just use some electrical tape some wires from an internet cable and sd adapter and an sd reader those could be house hold items for you just to restore its nand back up

That is also a good way to corrupt your files. Electrical tape does not hold that well. If those wires slip and touch something critical. A spark, a wisp of smoke, a dead console....

vb_encryption_vb · Jun 14, 2016

hacksn5s4 said:
it does just electrical tape the wires where you would solder them

That's the same equivalent as using saran wrap as a condom...

Homebrew Nintendo Upgraded new 3ds to 11.0 now what?

Well-Known Member

Banned!

Well-Known Member

Banned!

That hardmod guy....

GBATemp's Official Psi-Hater

Banned!

GBATemp's Official Psi-Hater

Banned!

Well-Known Member

Banned!

Well-Known Member

Banned!

Well-Known Member

Banned!

GBATemp's Official Psi-Hater

Banned!

Well-Known Member

Well-Known Member

That hardmod guy....

Similar threads

Popular threads in this forum