Hacking 3DS NOOB PARADISE - Ask questions here

Real_Redwolf · Mar 15, 2016

HariGp said:
If you try to launch homebrew from emuNAND, then it will try to open boot.3dsx again(which is rxTools), so it will just black out. Lol you can't open rxTools in rxTools You have to change your payload to find something else, like boom.3dsx

If that's happening, then your NANDs are linked. You will know if you have one random-numbers-and-letters-folders in the 'Nintendo 3ds' folder in your SD, that they're still linked. If you have two, then they're unlinked.

That's odd because I DO have two different random-numbers-and-letters-folders in my Nintendo 3DS folder and I TRIED to unlink them. I suppose I can t try to unlink them again.

EDIT: Also, I think I managed to do what I was wanting to in regards to the first topic.

EDIT#2: Thanks for the help! I managed to successfully unlink my NANDs!

thedude28 said:
1. Your config file is probably wrong if you're doing CTRBootManager
2. You must have had linked NANDs.

I don't have CTRBootManager and I tried to unlink my NANDs but I'll try to do so again.

EDIT#2: Thanks for the help! I managed to successfully unlink my NANDs!

PerksofLilies · Mar 15, 2016

okay so i used nasa to install cias which in the end worked out just fine, but i can only see them on sysNAND, but i know that i need to redownload achhd from the eshop to be usable,, so if i update my emuNAND to 10.7 will i be able to redownlad achhd, or...?

ConraDargo · Mar 15, 2016

Banamy said:
You should downgrade and make an emunand. You will be able to keep eshop access with emunand. What version is your 3ds on?

I'm on 10.6.0-31U

Banamy · Mar 15, 2016

ConraDargo said:
I'm on 10.6.0-31U

you need an entry point. Only cubic ninja, oothax, and smash bros hax is available

ConraDargo · Mar 15, 2016

Banamy said:
you need an entry point. Only cubic ninja, oothax, and smash bros hax is available

Alright, thanks!

Real_Redwolf · Mar 15, 2016

Can anybody explain to me why GBA VC games have to be installed to both sysNAND and emuNAND to work?

Plochan · Mar 15, 2016

Hi,

I'm on N3DS, sysnad 9.2 and emunand 10.3.
I'm using CtrBootManager and MenuHax to automatically load into rxTools. Everything is set up as in this tutorial.

My question is, if I update emunand to 10.7 will everything still work. I heard that menuhax is not working in 10.6+ so I am not sure if I should update now. I'm really satisfied with this setup and I don't want to break/change it.

Lucas Melo · Mar 15, 2016

Hello,

Last year I was in need of money and I had to sell my 3DS with original firmware , though I did back up saves folders of my digital games . This month I bought another 3DS with CFW rxTools , I downloaded some of the games I had on my old 3DS and tried to import the saves , but they appear corrupted in 3DS (probably because they have a different NNID ) . It is possible to convert or copy these saves so I can use them again in my 3DS ?

Thank you.

BobDoleOwndU · Mar 15, 2016

Plochan said:
Hi,

I'm on N3DS, sysnad 9.2 and emunand 10.3.
I'm using CtrBootManager and MenuHax to automatically load into rxTools. Everything is set up as in this tutorial.

My question is, if I update emunand to 10.7 will everything still work. I heard that menuhax is not working in 10.6+ so I am not sure if I should update now. I'm really satisfied with this setup and I don't want to break/change it.

Everything will still work if you update your emuNAND. Menuhax is installed on your sysNAND, not emuNAND, and is not touched when you update emuNAND.

Sahloknir · Mar 15, 2016

Not sure if this is the best place to ask this, but i have a CIA of Bravely Second, and my moon village thing is not getting streetpasses counted toward it most of the time. Is there some kind of region locking on streetpasses in the game? I have received a total of 7 (however I believe one of those is given to you by the game) despite receiving over 100 streetpasses, many of which say they've been playing Bravely Second, via my homepass relay.

Also is it safe to update gateway emunand to 10.7?

WolfHeroEX · Mar 15, 2016

I'm trying to clone a previous Emunand back into my 3ds, but it seems like that re-links the two Nands. Upon unlinking them, it creates a new third extdata folder for emunand completely ignoring the folder that went with my emunand.bin backup.

How can I clone the emunand backup, unlink the two nands in and keep it from trying to create and use a new extdata folder?

Also, if I've copied over my extdata and titles folders over bu the games aren't showing on the home menu, is that due to the emunand using an incorrect folder?

rody2k6 · Mar 15, 2016

I just got the Old3ds and it came with a SD card of 8gb with RX tools in it. I want to transfer all the content of the 8gb to a 16gb card but when I use these emunand extracting softwares they can't find the emunand file. When I open the SD card in my PC it says gatewaynand. Do I have something different? Do I just copy and paste the content into my new SD card?

kumpandjill · Mar 15, 2016

Is there a cartridge available right now that will play "old school" DS/DSi games on the 3DS with the latest firmware? I've got a 2DS and a New 3DS both updated to latest firmware and I want to play some DS Lite/DSi games.

Halvorsen · Mar 16, 2016

Real_Redwolf said:
Can anybody explain to me why GBA VC games have to be installed to both sysNAND and emuNAND to work?

The console reboots into a seperate "version" to play GBA and DS games. You actually play your GBA games in sysnand no matter where you launch it from. When you launch the title from emunand, it reboots the system while looking for the title to launch (which puts it in sysnand mode, no way to avoid reboot atm). And since GBA games run in sysnand, you need a game for the system to launch. If the game isn't in sysnand, you're asking the system to play nothing. As such, the icon on emunand is merely a placeholder.
Off topic here. But is there a way to create a dummy icon for emunand which flags as a GBA game, using the same title/uniqueID as the actual game in sysnand? That would save some space.

LiquidAudacity · Mar 16, 2016

rody2k6 said:
I just got the Old3ds and it came with a SD card of 8gb with RX tools in it. I want to transfer all the content of the 8gb to a 16gb card but when I use these emunand extracting softwares they can't find the emunand file. When I open the SD card in my PC it says gatewaynand. Do I have something different? Do I just copy and paste the content into my new SD card?

You should be able to just copy paste

Halvorsen · Mar 16, 2016

LiquidAudacity said:
You should be able to just copy paste

And also back up the emunand to a file if you have access to Decrypt9, then flash it back when everything is copied over. I don't use Gateway though. But transferring emunand does require another step, as it's not on a visible part of your SD card.

rody2k6 · Mar 16, 2016

LiquidAudacity said:
You should be able to just copy paste

So this gatewaynand is different then what I usually see about these emunand and etc?

rody2k6 · Mar 16, 2016

LinkSoraZelda said:
And also back up the emunand to a file if you have access to Decrypt9, then flash it back when everything is copied over. I don't use Gateway though. But transferring emunand does require another step, as it's not on a visible part of your SD card.

How would I get to seeing it? What confuses me is that I'm not running gateway. It is just a sd card that the guy that sold me the 3ds put rx tools in it.

Halvorsen · Mar 16, 2016

rody2k6 said:
So this gatewaynand is different then what I usually see about these emunand and etc?

No?
And original asker, I don't know. All I know is that whatever you're using, to transfer emunand to a new SD, you'd need to be able to extract the emunand to a file, set the new SD up for emunand, then flash the old emunand to the new card. Then you can copy over the standard files.

Halvorsen · Mar 16, 2016

Lucas Melo said:
Hello,

Last year I was in need of money and I had to sell my 3DS with original firmware , though I did back up saves folders of my digital games . This month I bought another 3DS with CFW rxTools , I downloaded some of the games I had on my old 3DS and tried to import the saves , but they appear corrupted in 3DS (probably because they have a different NNID ) . It is possible to convert or copy these saves so I can use them again in my 3DS ?

Thank you.

If you extract saves, they have no encryption. That's the point of the save manager. Hopefully, it'll work under a different manager? What are you using?

Hacking 3DS NOOB PARADISE - Ask questions here

Well-Known Member

Member

Flashback Fanatic

Well-Known Member

Flashback Fanatic

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum