Homebrew R4 Stage2 TWL Flashcart Launcher(and perhaps other cards soon™)....

Temarile

(ノ◕ヮ◕)ノ*:・゚✧ A9LH ✧゚・: *ヽ(◕ヮ◕ヽ)
Member
Joined
Jan 7, 2016
Messages
1,132
Trophies
0
XP
541
Country
Netherlands
Can confirm that the DSTT launcher also works on my R4 Upgrade Revolution (from r4i-sdhc.com, no (i) mark, no 1.4 etc).

I had pretty much assumed that this card was done for, so it was a very nice surprise to check on this thread again and find out that a solution had been found! Thanks much :D

Could you put all the files you used on your Upgrade revolution in a zip and upload it/send it to me? I'm having some issues over here. Your help would be greatly appreciated!
 

drayxe

New Member
Newbie
Joined
Mar 15, 2016
Messages
4
Trophies
0
Age
30
XP
46
Country
I have a M3 DS Real, but I can't make it work.
I have an Old 3DS with the sysnand in 9.2, and an emunand in 10.6 with RxTools 3.0.
I have installed the launcher in both the sysnand and the emunand.
The flashcart have the latest version of WoodM3 and works perfectly in a DS.
However, it keeps giving me the message: "Error Has Occurred. Hold down the Power Button to turn the power off." when I try to launch it both from the emunand and the sysnand.
Any clue?
 

Marko1000Marko

Active Member
Newcomer
Joined
Feb 27, 2016
Messages
38
Trophies
0
Age
34
XP
54
Country
Croatia
I have a M3 DS Real, but I can't make it work.
I have an Old 3DS with the sysnand in 9.2, and an emunand in 10.6 with RxTools 3.0.
I have installed the launcher in both the sysnand and the emunand.
The flashcart have the latest version of WoodM3 and works perfectly in a DS.
However, it keeps giving me the message: "Error Has Occurred. Hold down the Power Button to turn the power off." when I try to launch it both from the emunand and the sysnand.
Any clue?
Patch twl_firm, if you bothered to read the thread at all you would have known
 

drayxe

New Member
Newbie
Joined
Mar 15, 2016
Messages
4
Trophies
0
Age
30
XP
46
Country
Patch twl_firm, if you bothered to read the thread at all you would have known
I have actually read every single page, than you.
My conclusion was that RxTools 3.0 already have the twl-firm patched.
However, I, just in case, downloaded a cia to patch the twl_firm, and it didn't work either.
 

TDotFlame

Well-Known Member
Member
Joined
Dec 28, 2015
Messages
138
Trophies
0
Age
27
XP
83
Country
Canada
Can confirm that the DSTT launcher also works on my R4 Upgrade Revolution (from r4i-sdhc.com, no (i) mark, no 1.4 etc).

I had pretty much assumed that this card was done for, so it was a very nice surprise to check on this thread again and find out that a solution had been found! Thanks much :D
Can confirm that the DSTT launcher also works on my R4 Upgrade Revolution (from r4i-sdhc.com, no (i) mark, no 1.4 etc).

I had pretty much assumed that this card was done for, so it was a very nice surprise to check on this thread again and find out that a solution had been found! Thanks much :D
What firmware did you use?
 

Treeki

Well-Known Member
Member
Joined
Aug 1, 2007
Messages
203
Trophies
0
Location
Rogueport
XP
255
Country
Gibraltar
Could you put all the files you used on your Upgrade revolution in a zip and upload it/send it to me? I'm having some issues over here. Your help would be greatly appreciated!

What firmware did you use?
I simply extracted the DSTT_Launcher.rar file (from Apache Thunder's OP in this thread) onto my MicroSD, installed TTDS_Launcher.cia to NAND using FBI, and then put the SD into the R4 and launched the channel.

Here's a screenshot of my current MicroSD configuration in case it helps, with the R4/TTMenu-related files highlighted: https://img.wuffs.org/3ds_sd.png
(I removed all files relating to the stock kernel -- R4iMenu, R4.DAT etc -- and it still works, so I'm certain that the ones in the provided .rar should be enough.)

I don't know if it's relevant, but I'm using an old 3DS with 10.6 installed to SysNAND (no EmuNAND), CakesFW booted through arm9loaderhax, and a patched TWL_FIRM cia installed.
 
  • Like
Reactions: Temarile

yenzus93

Member
Newcomer
Joined
Feb 14, 2016
Messages
10
Trophies
0
Age
31
XP
66
Country
tested games and work the size of 256mb, except that pokemon black and white 1 and 2 and last games nds out white screen when started,
dstt same problem, apache thunder confirmed that ItouchDS works with launcher m3.

edit:aureinand use and Itouch DS sd 2GB in 2DS
edit2:multiboot itouchDS use and working press X during booting
 
Last edited by yenzus93,

TwistedZeon

Well-Known Member
Member
Joined
May 15, 2014
Messages
184
Trophies
0
XP
2,554
Country
Canada
So has anyone gotten the cart included in the spoilers to work?(Box and cart shown) Even when popping it into the 3ds it doesn't seem like it really detects it, though when on a spinning icon it will speed up for a moment like it knows something was put in.

Not sure what this clone is specifically called other then maybe R4-iii Upgrade Revolution?

image.jpeg
image2.jpeg
 

Apache Thunder

I have cameras in your head!
OP
Member
Joined
Oct 7, 2007
Messages
4,426
Trophies
3
Age
36
Location
Levelland, Texas
Website
www.mariopc.co.nr
XP
6,792
Country
United States
I have actually read every single page, than you.
My conclusion was that RxTools 3.0 already have the twl-firm patched.
However, I, just in case, downloaded a cia to patch the twl_firm, and it didn't work either.

You're probably using 3.0 Beta2? That one is outdated and is missing an important TWL_FIRM patch. (I wish they would provide a new release build or at least one with the correct TWL_FIRM patches...)

Note that if using outdated rxtools, it will override the prepatched TWL_FIRM you installed with it's outdated patches. So either don't use rxTools or update rxTools to a newer nightly build.
 

drayxe

New Member
Newbie
Joined
Mar 15, 2016
Messages
4
Trophies
0
Age
30
XP
46
Country
You're probably using 3.0 Beta2? That one is outdated and is missing an important TWL_FIRM patch. (I wish they would provide a new release build or at least one with the correct TWL_FIRM patches...)

Note that if using outdated rxtools, it will override the prepatched TWL_FIRM you installed with it's outdated patches. So either don't use rxTools or update rxTools to a newer nightly build.

Yes, I am using that version.
To update it, I just have to overwrite the files from my SD card with the new version? or I have to do something else?

I don't know if this matters, but I patched the twl_firm having the RxTools 3.0 Beta2 already installed, and it didn't work either.
 

Apache Thunder

I have cameras in your head!
OP
Member
Joined
Oct 7, 2007
Messages
4,426
Trophies
3
Age
36
Location
Levelland, Texas
Website
www.mariopc.co.nr
XP
6,792
Country
United States
3.0 Beta2 undoes the needed patch. Stop using it. Use a newer nightly build or don't use it at all. If you already have prepatched TWL_FIRM cia installed to emunand, then just use a different CFW like reinand or cakesfw to launch it.

Also, R4 SDHC users who weren't able to get their clone to work with the DSTT Launcher:

http://filetrip.net/nds-downloads/flashcart-files/download-dsttdumper-0-01-f19456.html

Try running this on the card. You'll need a DS/DS Lite obviously since it's not working on your 3DS right now. But it will dump straight to the MicroSD card of the flashcart without needing woodumper or wifi.

Note that if it isn't able to write the file, you'll need to dldi patch it for your card. ;)
 

Spewpa

Member
Newcomer
Joined
Mar 2, 2016
Messages
20
Trophies
0
Age
27
XP
82
Country
Venezuela
3.0 Beta2 undoes the needed patch. Stop using it. Use a newer nightly build or don't use it at all. If you already have prepatched TWL_FIRM cia installed to emunand, then just use a different CFW like reinand or cakesfw to launch it.

Also, R4 SDHC users who weren't able to get their clone to work with the DSTT Launcher:

http://filetrip.net/nds-downloads/flashcart-files/download-dsttdumper-0-01-f19456.html

Try running this on the card. You'll need a DS/DS Lite obviously since it's not working on your 3DS right now. But it will dump straight to the MicroSD card of the flashcart without needing woodumper or wifi.

Note that if it isn't able to write the file, you'll need to dldi patch it for your card. ;)
And how does one apply a dldi patch ;w;?
 

Apache Thunder

I have cameras in your head!
OP
Member
Joined
Oct 7, 2007
Messages
4,426
Trophies
3
Age
36
Location
Levelland, Texas
Website
www.mariopc.co.nr
XP
6,792
Country
United States
For some reason the DSTT launcher isn't working for me. I am running AuReiNAND on my sysNAND with A9LH. It just gives me an error after I launch it.

Did you install prepatched TWL_FIRM CIA? n3DS or o3DS? You can find the CIA at "a certain site". But I can't link to it here.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    I @ idonthave: :)