Hacking Problems flashing a DS using G6/Passme

blizeH · Jan 17, 2007

Hi guys,

I went to flash my friends DS last night, I put the correct game into my uber old passme, placed it into the top of the DS with the G6 plugged into the bottom and I just get a white screen.

Any idea what's up with it? I don't think the problem is with the G6 because I did try another, I'm almost certain too that you can flash the DS by running files off the G6, but could be wrong; the last few DSs that I've flashed were using an M3.

Cheers

Killermech · Jan 17, 2007

QUOTE(blizeH @ Jan 17 2007 said:
uber old passme

Im guessing that's your problem. His DS could be using new firmware or maybe it's an DS lite? Then the old passme device won't work.

G6 works fine for flashing, used G6 myself to install flashme.

blizeH · Jan 17, 2007

Hmm, that's odd though, we both bought our white DSs at the same time, and I've managed to flash mine without any problems, as well as another friends that bought a black DS around two months or so after I got mine.

I know I had a really old passcard even before that one which only worked with my original DS, but I've not had any problems with that slightly less old passme! Well, until now of course.

Killermech · Jan 17, 2007

Oh, but you mentioned black and white ds. So im guessing it's nds lites.. then im most likely wrong with my theory in the prev post.
Have you tested any gba games in his slot2 to see it's working? Maybe it isn't reading the cart properly.

blizeH · Jan 17, 2007

Funny you should mention that, it did read his G6 just fine in the GBA slot, but when I went to it there was nothing there, just a blank interface without any buttons?

I never actually got around to trying my G6 in GBA mode on there though unfortunately.

XryryX · Jan 17, 2007

hey guys.

its my DS in question, i took the liberty of uploading some (very poor sorry off the fone) videos, to maybe help the situation.

thanks.

here it is with the passme and g6 inserted :

http://www.youtube.com/v/uy5HQ_ObVVY

here it is with no pass me or DS game inserted, just the G6 :

http://www.youtube.com/v/nldG65SjZfE

tama_mog · Jan 17, 2007

did you make sure to have the proper sram etc on the g6?

blizeH · Jan 17, 2007

Aww shoot, I knew I forgot something!

Ah well, at least he has the passme at his house so he can do it, lolz.

Sorry ry!

XryryX · Jan 17, 2007

haha, nevermind nick.

so what do i have to do exactly?

im quite new to this.

tama_mog · Jan 17, 2007

you need the game code of the game you're using and download a sram dump of the game and place it in the root of the g6 drive.

You can get them here:

http://darkfader.net/ds/games/

Further instructions here:

http://www.dspassme.com/

XryryX · Jan 17, 2007

hey thanks, i done that but the white screen still appears.

i downloaded both the SAV and GBA.

both are in the root directory, and i even ran the GBA file and it said "writing SRAM... done" but still a white screen after i insert the pass me.

have i missed something out? ive never done this before so please dont leave anything out even if it seems obvious to you.

tama_mog · Jan 17, 2007

may need to update the passme device itself as well. And perhaps the sram has to be named in a certain way, it had to be sram.bin for the passkey, no sure about the original passme.

XryryX · Jan 17, 2007

yeah i read somewhere it needing to be called sram.dat

but ive renamed it to .dat and .bin with no luck still.

my only concern is when i load up into gba mode, and go into game, nothing is there, just says "game flash" at the top (in a tab type thing) but nothing in there.

whereas if i go into mycard, all the folders and files are in there fine.

tama_mog · Jan 17, 2007

I don't remember how the g6 gba menu looks like, and if it filters out the .nds files and does not display them. But there is a chance that the passme is too old for your DS Lite, I think you may need a passme2, but I'm not sure if that's what you have either, are you sure you're following this exactly? :

http://www.ndshb.com/modules.php?name=News...=article&sid=80

And also a key point is to make sure yo're using FAT16, just in case.

XryryX · Jan 17, 2007

hmm, just done a firmware test, and im running firmware 5, which needs passme2.

can i downgrade my DS firmware?

tama_mog · Jan 17, 2007

you technically can, but you still need access to NDS mode which is what the passme device is for....so right now no. You need to either get a passkey2, passme2, ezpass2, passcard (new ones, either 2 or 3), passwe, superkey, etc etc.

XryryX · Jan 17, 2007

got ya.

the news i was dreading (wanted to get it up and running last nite!)

but i guess ill have to do it! cant find passme2 anywhere on the net!

passcard3 seems accessible tho. ill get that if itll do the same job.

XryryX · Jan 17, 2007

thanks for your help BTW

Hacking Problems flashing a DS using G6/Passme

Well-Known Member

Cookie Monster

Well-Known Member

Cookie Monster

Well-Known Member

Member

Kupo

Well-Known Member

Member

Kupo

Member

Kupo

Member

Kupo

Member

Kupo

Member

Member

Similar threads

Popular threads in this forum