Hacking USB Loader GX

Badablek · Jan 26, 2015

My compilations shows as revision 0,is that why i can get the settings saving properly?

patito I had this problem in the past and it was my svn client : rapidsvn (it was the best svn client IMHO). Even with SubWCrev installed, revision was set to 0 everytime.
it's not updated anymore and it's NOT compatible with current svn.

you should use tortoiseSVN (it has already SubWCrev).

patito · Jan 26, 2015

Thanks guys,it was indeed the svn client,working fine now.

Acidflare · Jan 26, 2015

So I finally updated to Revision 1239 my fat32 HDD no longer shows 7r.41GB of 148.98GB it now properly states 73.41GB of 148.98GB glad you fixed that cyan

Albertini · Jan 26, 2015

Hi

I need help, Xenoblade Cronicles don´t boot. I updated the USB Loader GX to the latest version. Other games works perfect. Try with Pimp my Wii to update the IOS with not working

Thanks

OriginalHamster · Jan 26, 2015

Albertini said:
Hi

I need help, Xenoblade Cronicles don´t boot. I updated the USB Loader GX to the latest version. Other games works perfect. Try with Pimp my Wii to update the IOS with not working

Thanks

It boots fine for me (NTSCU), latest version too, your is NTSCU or PAL?

Albertini · Jan 26, 2015

Acidflare · Jan 27, 2015

OriginalHamster said:
It boots fine for me (NTSCU), latest version too, your is NTSCU or PAL?

I can verify NTSC-U boots fine with the standard cIOS249 settings
Also if anyone has Valhalla Knights Eldar Saga NTSC-U and wants to play online let me know

Albertini · Jan 27, 2015

I'm really interested in playing this game, I can perform a fresh installation of HC, CIOS and Loader if necessary

Thanks

OriginalHamster · Jan 27, 2015

Albertini said:
I'm really interested in playing this game, I can perform a fresh installation of HC, CIOS and Loader if necessary

Thanks

If your other games works, I guess it has to do with the game rip, Xenoblade is not a problematic game.

Duncan Idaho · Jan 27, 2015

Duncan Idaho said:
Ok Cyan I have a question, I have on the settings for usb loader gx to use nintendont, and I have ocarina enabled, my question is, where does the boot loader takes it's file from, SD/codes? or SD/games/gameid/gameid.gct?

nikeymikey · Jan 27, 2015

Are there any special requirements to load channels from emunand? I have tried to load a few different games but i just get a black screen.

Acidflare · Jan 27, 2015

nikeymikey said:
Are there any special requirements to load channels from emunand? I have tried to load a few different games but i just get a black screen.

honestly besides a couple of the big games I store them all on the SD card system menu, some games use additional data on the system nand when moved to the SD card so emunand through Uneek2O works best for those.
I prefer the SD Card Menu due to emunand having low compatibility for some games and some games that do play stop working later on like Pokemon Rumble it boots you can play it but get to the last level and it does nothing but freezes when entering any of the last 6 areas

nikeymikey · Jan 27, 2015

SD card menu?? Where is that, do you mean on the actual system menu?

Acidflare · Jan 27, 2015

yes I do

Acidflare · Jan 27, 2015

Even using a Neek setup to run an emulated system menu won't allow for games like bejewled 2 to work it freezes up at the "Press a+b to start" screen So I stick to only running a few games with an EmuNand

Acidflare · Jan 27, 2015

This is why I have asked for SD card system menu access in USB Loader GX but Cyan never replies about the idea, but then again there's so many different features in USB Loader GX that he can barely cram anything else into the little amount of memory that is left with the current amount of code that usb loader gx has

Sheldon392 · Jan 28, 2015

I installed cIOS d2x v10-alt (beta53) base 56, 57, and 58 in slots 249, 250, and 251. When I launch GX through my SD card it doesn't detect my hard drive when its plugged into USB 1. After 20 second of trying to mount the drive it says "Mounting USB Port to 1" and stays there for about ten minutes till it says it couldn't mount the drive and goes into channel list mode.

OriginalHamster · Jan 28, 2015

Hi Cyan, does ULGX support .bnr for gamecube games?
If so, what's the format to display custom banners for GCN?

Albertini · Jan 28, 2015

OriginalHamster said:
If your other games works, I guess it has to do with the game rip, Xenoblade is not a problematic game.

Try with the USA iso and works ok

Acidflare · Jan 28, 2015

Sheldon392 said:
I installed cIOS d2x v10-alt (beta53) base 56, 57, and 58 in slots 249, 250, and 251. When I launch GX through my SD card it doesn't detect my hard drive when its plugged into USB 1. After 20 second of trying to mount the drive it says "Mounting USB Port to 1" and stays there for about ten minutes till it says it couldn't mount the drive and goes into channel list mode.

Wii Standing up use port on the left, Wii Laying flat use the bottom port. That is port 0 you want port 0 for your Game device and port 1 for any extra peripherals.

Hacking USB Loader GX

Well-Known Member

Member

HomeBrew Beta Tester

Active Member

UStealthy

Active Member

HomeBrew Beta Tester

Active Member

UStealthy

Well-Known Member

This is now a Spiderman thread.........

HomeBrew Beta Tester

This is now a Spiderman thread.........

HomeBrew Beta Tester

HomeBrew Beta Tester

HomeBrew Beta Tester

Well-Known Member

UStealthy

Active Member

HomeBrew Beta Tester

Similar threads

Popular threads in this forum