Things you have fixed/modded recently

DinohScene · May 20, 2014

All old xboxes are supposed to keep track of the time (stock dash) for ~3 hours.
360's don't have a clock cap since MS initially thought everybody would be connected to the Net anyway.
Seeing how both the Xbox and the 360 sync time upon first connection, battery backed time or cap backed time is becoming pointless ;p
This is also true for other consoles.
Wii/PS3 where also connected to the Internet for most of the times.
XBone/PS4/Wii U, same story.

Sanoblue · May 20, 2014

no pics currently but give me a bit....

Cleaned up for a friend 2 days ago

3 NES (one with security chip disabled)
2 SNES
Sega Genisis (sadly it was beyond repair

)
Game Gear (sadly beyond repair till parts come in)

Over the past few months

PSP 2000 (Installed a Dual MemStick with X2 16gig - Mine)
Wii (Black) (Mod ready to go, waiting on hd and sd come in)
Wii (White) (Updated mod - Mine )
PS2 (redid the memcard hack and installed new drive - Mine)
4 Computers ( 3 from spare parts and 1 ordered n built for me

)

jargus · May 20, 2014

Most recent fix was blowing dust out of a overheating PC. Took over an hour yo get it done.

Quietlyawesome94 · May 20, 2014

Put CM11 on my friends Kindle Fire HD about an hour ago.

stinkoman · May 20, 2014

I just paid a chinese guy for the unlock codes for my vzw moto x because verizon is hitler.

nukeboy95 · May 20, 2014

Re-soldered back my charger port on my lappy, Do not buy a toshiba laptop unless you can solder.

Hanafuda · May 20, 2014

How's this? I had two old broken DS Lite's. On the white one, the plastic supporting the hinge had crumbled to junk. On the black one (so used the serial number is worn completely off), the top screen was dead. Now I have one DS Lite. It works perfectly, even though it's still cosmetically rough and I did pretty badly mangle the little rubber squares that cover the top screen screws.

emmanu888 · May 20, 2014

Not modding but, i tried to get an arcade stick plug out of a Wiimote. Long story short, the arcade stick is permanently plugged in the Wiimote and the Wiimote is broken as well.

FAST6191 · May 20, 2014

nukeboy95 said:
Re-soldered back my charger port on my lappy, Do not buy a toshiba laptop unless you can solder.

Oh I assure you it not just Toshiba. Lately I have even taken to extending wires out of the case and replacing the ends with some nice heavy duty connectors.

Sicklyboy · May 20, 2014

This is one of those threads that is going to blow up overnight. Neat.

I posted about it a while ago, there was a bit of a hiccup with it but everything is FINALLY back together properly and works great. PSP 3001 USB Charge mod

Gotta go run to AutoZone and pick up a new left-rear break caliper for my car and install it.

Removed 10 of the large 6.3v 2200uF caps from around the CPU of a Xenon 360 and replaced them, almost all of them were bulging. No pics unfortunately.

Plstic · May 20, 2014

I TSOP flashed a few xboxes a month ago, fixed the wiring in my jtag and cut a hole in the side for the Nand-x Wires lol. Right now I'm working on a arcade stick, I gotta padhack a 360 controller. :gun:

VashTS · Jun 1, 2014

Recently got a slim 360 + kinect for $20, Red dotted. Reflowed 2x and all is well, also X clamp replaced. Did a kamikaze but sadly botched it so the drive doesn't want to open properly but still reads games.

scored another xbox slim based on a buddy that owed me $$$ for $25 + settled the debt. i already modded that one about a year ago.

modded my cable remote to have a rechargeable battery with USB charging port.

junn · Jun 1, 2014

did some mods. on my 2/3ds few weeks ago.
micro usb "nand dump" ready & buttons swap.

YayMii · Jun 1, 2014

Just fixed the bent CPU pins on my brother's $400 motherboard

Now he has 2 functioning PCs (both of which are at least 2x more powerful than my current setup), and he's thinking about passing the weaker of the two to me (still an i7 950). Finally going to get that upgrade I've been waiting for!

emmanu888 · Jun 1, 2014

Not me but a friend of mine got the arcade stick plug that was stuck in one of my Wiimotes recently. He even took the lock clip out of the arcade stick cable, no risk of it ever getting stuck again

dicamarques · Jun 5, 2014

On my school theres every year a sort of show off from what we do on the diferent courses so me and a couple of friends fixed a LED Cube that was on my school, there were some led's missing and we placed another program on the arduino. On the video you can also see some rhythm lights that are going to be also used on that day.

~~It definitely isn't me on the video~~

nonameboy · Jun 5, 2014

here's my contribution. replaced the analog stick with a ps2 like one

Ozito · Jun 5, 2014

nonameboy said:
here's my contribution. replaced the analog stick with a ps2 like one

That's cool.
How did you do it, did you replace the whole joystick unit?

nonameboy · Jun 5, 2014

yes and here are some tutorials http://nfggames.com/forum2/index.php?topic=3574.0

Hanafuda · Jun 5, 2014

nonameboy said:
here's my contribution. replaced the analog stick with a ps2 like one

Nice work. I'm hoping to never have to do it though. I called up Nintendo about 10-11 years ago and asked them if there was anything I could do to fix the worn out stick in one of my N64 controllers. They sent me 5 of these, for free (one of them is in the controller, still going strong).

.

Things you have fixed/modded recently

Gay twink catboy

The Fuzzy Blue Woof!

Well-Known Member

Well-Known Member

Magnificent Bastard

Old skool member

Well-Known Member

6 years and still going strong

Techromancer

#JOYCONBOYZFOREVER

Guru Meditation Error

Beat it, son

.

hi

6 years and still going strong

Definitely not Bruce Wayne.

Well-Known Member

Who you gonna call?

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum