For everyone who wants to create an AP with Windows7/8
You need:
A. a computer/laptop/tablet with built-in wireless network card
or
B. a computer/laptop/tablet with a wifi USB dongle (wireless USB adapter)
(*Because of the limitation of WIN7/8, the second hex digit of the MAC must be 2, 6, a or e)
(*ethernet is unnecessary)
(*don't need any software to change MAC)
(*don't need any software to create hosted network with built-in wireless network card)
=>If you are using [A. a computer with built-in wireless network card]
Fist, change your MAC
1.open [Device Manager]
2.find your wireless network card under [Network adapters], and double click on it
3.click [Advanced] tab
4.select something like [Network Address] or [Locally Administered Address] in [Property]
section
5.select [Value:] and enter the MAC address you want ([Not Present] is the default)
6.press [OK]
Then, create a hosted network
1.
WIN7: press [Start], enter [cmd] and hit [Enter], right click on [cmd] and select [Run as
asministrator]
WIN8: open [charm bar], press [Search], enter [cmd], right click on [cmd] and select [Run as
asministrator]
2.input [netsh wlan set hostednetwork mode=allow ssid=attwifi key=password](change "password"
to any passwork you want)
3.input [netsh wlan start hostednetwork]
(*you can input [netsh wlan stop hostednetwork] to turn off the hostednetwork)
(*you can input [netsh wlan show hostednetwork] to show the configure)
4.go to [Control Panel]=>([Network and Internet]=>)[Network and Sharing Center]
5.you will see [attwifi] there, it will show [Local Area Connetction*##] after [Connections:]
(## could be any number)
6.find the network which is connected to the Internet, click the words after [Connections:]
to open the status
7.click [Properties], click [Sharing] tab, check [Allow other network users to connect
through this computer's Internet connection], and select [Local Area Connetction*##] (the
connection of the hostednetwork[attwifi]) (maybe you don't need to select because you only
have two connections)
8.press [OK]
Finally, change your 3DS network settings
1.open your 3DS, open [System Settings], click [Internet Settings], search [attwifi] and
enter the passwork
2.close [System Settings]
Last step: turn your 3DS into sleep mode (suggest) and wait for streetpass!
(*you can't use nintendo zone app because your are using an AP with encryption)
(*your hosted network will stop automatically whenever you change your MAC)
=>If you are using [B. a computer with a wifi USB dongle (wireless USB adapter)]
Fist, change your wifi USB dongle's MAC
1.open [Device Manager]
2.find your wifi USB dongle under [Network adapters], and double click on it
3.click [Advanced] tab
4.select something like [Network Address] or [Locally Administered Address] in [Property]
section
5.select [Value:] and enter the MAC address you want ([Not Present] is the default)
6.press [OK]
Then, change your soft-ap's SSID to [attwifi]
you could either retain the encryption or remove the encryption
If you remove the encryption:
Just turn your 3DS into sleep mode (suggest) and wait for streetpass!
If you retain the encryption:
1.open your 3DS, open [System Settings], click [Internet Settings], search [attwifi] and
enter the passwork
2.close [System Settings]
Last step: turn your 3DS into sleep mode (suggest) and wait for streetpass!
(*you can't use nintendo zone app because your are using an AP with encryption)
==================================================================
Because I'm a Taiwanese (Chinese), it's hard for me to make this [HOW-TO]. Maybe there is
something that I didn't express clearly. I'll be glad if someone points out my mistakes.
AncientBoi
K3Nv2
Xdqwerty
(
