What revision of usb loader are you running, ? Did you check the settings i told you?
Also try Dios Mios booter rev 30 as ddetkowski suggested
What revision of usb loader are you running, ? Did you check the settings i told you?
Also try Dios Mios booter rev 30 as ddetkowski suggested
you should have only one partition, that being FAT32 with a folder called wbfs, were your Wii games reside, and a folder called games, were your Gamecube games reside.
If not, its wrong. is your usb drive getting power? is it plugged into the correct port? try both if not sure.
If not, its wrong. is your usb drive getting power? is it plugged into the correct port? try both if not sure.
To be fair he does not have to release anything if he didn't want to, it's his own work and he has the right to keep it for himself, however I'm not sure if he has the right to sell "maybe he can't due to the others who helped at the beginning of DML" but if he can then he can and we have no right to say anything otherwise, personally I prefer he'd release at least the source code because since DML 1.0 no one could fix or contribute to the project and we all became prisoners in Crediar's jail
Hi all, and thanks to all the people involved in this community.
On my PAL Wii, I use DM + USB Loader GX (apparently the latest releases), using only a USB disk (fat32/32k), and everything looks good. I tried with some of my Gamecube disks, the backups are successful and the games launch well.
Now I want to make a new step.
I have "Winning Eleven 6 Final Evolution" (GW6JEM), that I was used to launch using a Freeloader disk on my Gamecube. What a relief to be able to launch the backup without dealing with the Freeloader! It runs fine too, but it is still in Japanese, no magic
I found a patch, to be used with ppf-o-matic on the iso, that should translate most part of the game. But when patching the iso, the game is no more found by the system.
Is that normal? Maybe the DM checks the hashcode, md5 or something from the iso...
Or ppf patching needs specific parameters that I forgot?
If someone has any idea, I would appreciate. Thanks.
On my PAL Wii, I use DM + USB Loader GX (apparently the latest releases), using only a USB disk (fat32/32k), and everything looks good. I tried with some of my Gamecube disks, the backups are successful and the games launch well.
Now I want to make a new step.
I have "Winning Eleven 6 Final Evolution" (GW6JEM), that I was used to launch using a Freeloader disk on my Gamecube. What a relief to be able to launch the backup without dealing with the Freeloader! It runs fine too, but it is still in Japanese, no magic
I found a patch, to be used with ppf-o-matic on the iso, that should translate most part of the game. But when patching the iso, the game is no more found by the system.
Is that normal? Maybe the DM checks the hashcode, md5 or something from the iso...
Or ppf patching needs specific parameters that I forgot?
If someone has any idea, I would appreciate. Thanks.
I like the short list, but would like to remark that when using DM and a big HDD (or if you ar fortunate a BIG SD card when using DML) you don't need to use a compression tool. But its up to you.
i dunno why, but F-Zero doesn't show up on cfg OR DML booter.
It DOES show up on USB loader GX, but i can only use txt files for cheats there.
It tells me to download. gct file even after i put the correct one you gave us (thank you btw) to the specified gct folder. It then creates a .txt file of the cheat.
So if its not much trouble, could you please upload GFZP01.txt so i can use that correct one straight away?
Thanks again
There must be something wrong in your CFG setup because there is nothing different about the game that would make it not show up.
i dunno why, but F-Zero doesn't show up on cfg OR DML booter.
It DOES show up on USB loader GX, but i can only use txt files for cheats there.
It tells me to download. gct file even after i put the correct one you gave us (thank you btw) to the specified gct folder. It then creates a .txt file of the cheat.
So if its not much trouble, could you please upload GFZP01.txt so i can use that correct one straight away?
Thanks again
However, if you want to try this on GX, it has a bug related to the cheats.
You can read how I worked around it here.
Essentially, copy the gct file to the same directory where the iso or extracted files are (e.g., sd:/games/GFZP01).
On the GX game configuration screen, disable Ocarina and enable the debugger.
Voila! Your savefile will work, if you can load the game.
When you are done, you might want to go back into the game config screen and reset settings to defaults, unless you plan to use other cheats, but don't be a chicken! accept the challenge.
- Joined
- Nov 15, 2011
- Messages
- 5,210
- Trophies
- 0
- Age
- 40
- Location
- Deep in GBAtemp addiction
- Website
- gbadev.googlecode.com
- XP
- 1,709
- Country
There must be something wrong in your CFG setup because there is nothing different about the game that would make it not show up.i dunno why, but F-Zero doesn't show up on cfg OR DML booter.
It DOES show up on USB loader GX, but i can only use txt files for cheats there.
It tells me to download. gct file even after i put the correct one you gave us (thank you btw) to the specified gct folder. It then creates a .txt file of the cheat.
So if its not much trouble, could you please upload GFZP01.txt so i can use that correct one straight away?
Thanks again
However, if you want to try this on GX, it has a bug related to the cheats.
You can read how I worked around it here.
Essentially, copy the gct file to the same directory where the iso or extracted files are
(e.g., sd:/games/GFZP01/game.iso).
Thanks themanuel!!
I now have successfully transfered my savegame from my 251 to my 1019 card !
no need, already mastered (well, except the 3 final story chapters in very hard) the game back in 2004, i have everything unlocked
I now have successfully transfered my savegame from my 251 to my 1019 card !
no need, already mastered (well, except the 3 final story chapters in very hard
) the game back in 2004, i have everything unlocked
Awesome!no need, already mastered (well, except the 3 final story chapters in very hard
Isn't it a great feeling to know that coveted save file will always be secure from now on (as long as you back it up)?
I finished all the cups in master difficulty a few years back, but I have not done the story mode in "Very Hard". I guess I need to stop slacking and get back into it.
It looks like you are farther ahead but you probably still have a few drivers left to unlock.
- Joined
- Nov 15, 2011
- Messages
- 5,210
- Trophies
- 0
- Age
- 40
- Location
- Deep in GBAtemp addiction
- Website
- gbadev.googlecode.com
- XP
- 1,709
- Country
Even when you log in, unless you're Crediar it says "Forbidden." I think he blocked it so that people had to use either something before r59 on the old SVN or use the v2.2 link he gets paid for.
EDIT : Oh, wait. I thought we were talking about the DML v1.x page (which has been blocked for a while now.) Hope this gets straightened out. For now, I'm glad there's at least the page linked by [member='tmv_josue'] (next post.)
Similar threads
