Ok, thanks very much.
I just asked to be sure.
For confirm: me and other user try it and it works great.
I just asked to be sure.
For confirm: me and other user try it and it works great.
Ok, thanks very much.
I just asked to be sure.
For confirm: me and other user try it and it works great.
thx
I was after some assistance. I am attempting some official speedruns on Virtual Console games so what I have done so far is...
1. Got a 4.1 Wii and removed all softmods.
2. Used this guide and updated to 4.2. Everything installed fine.
3. Installed priiloader and enabled region free channels.
I am under the impression that using an emulated nand is to not wear out the real Wii nand but is this only if the Wii is running the games from SD all the time? What if you install directly to the nand with a wad manager and load the games from a channel each time? This should not wear out the nand surely since this is what a "real" consumer would be doing from the Wii Shop channel etc?
With my Wii in this condition is it fine to install some VC games and run from nand?
1. Got a 4.1 Wii and removed all softmods.
2. Used this guide and updated to 4.2. Everything installed fine.
3. Installed priiloader and enabled region free channels.
I am under the impression that using an emulated nand is to not wear out the real Wii nand but is this only if the Wii is running the games from SD all the time? What if you install directly to the nand with a wad manager and load the games from a channel each time? This should not wear out the nand surely since this is what a "real" consumer would be doing from the Wii Shop channel etc?
With my Wii in this condition is it fine to install some VC games and run from nand?
Correct. When you launch games from the sd card, it temporarily copies it to the nand each time you run it. When you install it to the nand, and run it from the nand, it isn't writing to the nand everytime.
-Erik
@[member='burritoboy9984']
Sorry man but finaly I found someone with NewWiimote (orignal Nintendo).
All old homebrew don't work.
All new recompiled homebrew works fine.
But your compiled version of priiloader MOD (r142), one time start the installer form HBC, don't supported the new wiimote.
I can't say if, one time installed, the new wiimote work in priiloader menù.
Sorry man but finaly I found someone with NewWiimote (orignal Nintendo).
All old homebrew don't work.
All new recompiled homebrew works fine.
But your compiled version of priiloader MOD (r142), one time start the installer form HBC, don't supported the new wiimote.
I can't say if, one time installed, the new wiimote work in priiloader menù.
Ooh, I recompiled the installer, but not the actual priiloader app (doh). I'll fix it in the next couple of days. Off to work for now.
-Erik
Hi there.
I just read your guide. It's great!
I'm currently running system menu 4.1e with everything installed (priiloader 0.7, usb loader gx 3).
When reading your guide I get the impression that the first thing you do when softmodding a new wii running 4.1, you first update to 4.2?
Any reason why and furthermore: is it neccesary in my case?
Tried to update to the beta priiloader 0.8 beta 4, but get an error (system menu version invalid or not vanilla).
So thought 4.1 could be the problem. That's why I'am looking in to this.
The wii is working almost perfectly. Only thing is: sometimes usb loader gx doesn't seem to see my 2t wd elements.
After a few resets/power downs, the problem goes away.
I just read your guide. It's great!
I'm currently running system menu 4.1e with everything installed (priiloader 0.7, usb loader gx 3).
When reading your guide I get the impression that the first thing you do when softmodding a new wii running 4.1, you first update to 4.2?
Any reason why and furthermore: is it neccesary in my case?
Tried to update to the beta priiloader 0.8 beta 4, but get an error (system menu version invalid or not vanilla).
So thought 4.1 could be the problem. That's why I'am looking in to this.
The wii is working almost perfectly. Only thing is: sometimes usb loader gx doesn't seem to see my 2t wd elements.
After a few resets/power downs, the problem goes away.
Not sure on why priiloader is giving that error. Is it a custom system menu that you have installed? In regards to the hard drive issue, I noticed it happens with other wall powered drives when they spin down.
-Erik
-Erik
@[member='burritoboy9984']
Sorry man... there's any news?
I know that you give me the source, but I haven't bootmii on boot2 for try my compiled version, and I prefer to give to other people for test with new wiimote, a version compiled from you.
Sorry man... there's any news?
I know that you give me the source, but I haven't bootmii on boot2 for try my compiled version, and I prefer to give to other people for test with new wiimote, a version compiled from you.
Hi, I got a Wii with a weird semibrick... If I try to to det to the settings the files are corrupted, only have access to save data and channels... cant see what system menu version the Wii has however I got the SD icon like if it is 4.x...
If I try to run bannerbomb got error 004 like if it is in 4.3 but trying to launch Super Smash Brawl the channel disk ask me for the update... I accept and after seeeveral minutes nothing happens...
Can somebody bring a light here?
If I try to run bannerbomb got error 004 like if it is in 4.3 but trying to launch Super Smash Brawl the channel disk ask me for the update... I accept and after seeeveral minutes nothing happens...
Can somebody bring a light here?
I just got the exact same thing.
I was trying to mod a 4.1 Wii. I followed the instructions downloading the up42e.zip file, I began the process via the System Menu > Channels etc.
I watched as it showed many IOS updates happening, but when it was finished I didn't have a Homebrew Channel.
So I thought to check the settings to verify it was now 4.2 and I get the infamous semi-brick opera error page.
It was acting as if the system menus were corrupt.
Now the bannerbomb wouldn't work, so I used the Smash Bros smash stack to get the HBC installed.
I finished the 4.2 mod work installing everything, but I still cannot access the system menu.
Can someone verify the files in the e42up.zip are correct. I need a valid set of 4.2 files to fix this I assume.
Any help is appreciated.
A the end i recompiled priiloader (program and installer) but I can't say if it works.
Please someone with bootmii on boot2 and new wiimote try it.
I just asked today in an Italian Forum.
If I had the good fortune to have bootmii of boot2, I would give no trouble, but I can only do certain tests ..
Priiloader 236MOD v0.70 (r142): http://www.mediafire...5gl2f400qv0zk86
EDIT: some user confirmed that all works good, I'm waiting confirm form user with new wiimotes.
Please someone with bootmii on boot2 and new wiimote try it.
I just asked today in an Italian Forum.
If I had the good fortune to have bootmii of boot2, I would give no trouble, but I can only do certain tests ..
Priiloader 236MOD v0.70 (r142): http://www.mediafire...5gl2f400qv0zk86
EDIT: some user confirmed that all works good, I'm waiting confirm form user with new wiimotes.
A the end i recompiled priiloader (program and installer) but I can't say if it works.
Please someone with bootmii on boot2 and new wiimote try it.
I just asked today in an Italian Forum.
If I had the good fortune to have bootmii of boot2, I would give no trouble, but I can only do certain tests ..
Priiloader 236MOD v0.70 (r142): http://www.mediafire...5gl2f400qv0zk86
EDIT: some user confirmed that all works good, I'm waiting confirm form user with new wiimotes.
Yes the 4.2 files are correct. Not sure why you guys are having issues there.
Thanks actar. Been really busy.
-Erik
I have a Wii USA that had 4.1u with dvdx,HBC,Cios and wiikey 2 modchip, some games would not load. I decided to use this tutorial to see if I could make games work, but after updating to 4.2 and installing all IOS, Cios. When I put the dvd backup it appears the title and when I press A to play screen stays black. Why? Some games would not even load, it says error.. reset wii etc. Thanks
Similar threads
-
-
@
SylverReZ:
One of the sites that weren't blocked on the school's network was some file uploading sites. I would upload some games, write down the URL and take it to school one day. -
-
@
SylverReZ:
I did it when the teachers werent looking ofc. I even managed to take in a USB stick that wasn't allowed.
-
@
Bunjolio:
my school has a chrome extension called light speed filter agent and it legit blocks YouTube pfps since the file cdn(I think aka yt3.ggpht.com) is classed as mature -
-
-
-
-
-
-
@
SylverReZ:
It was easy to bypass some of the restrictions, as one of the admins left a registry key in the administrative shares drive, which allowed me to get around the blocking of some sites.
-
-
-
-
-
-
-
-
-
-
-
-
-
