Hacking Configurable USB Loader

pplucky · Jan 30, 2011

rrestiaux said:
Some games do not work unless i manually change the setting to force NTSC.
is there a setting for this to be automatic?
I upgraded from version 58. v58 i didn't have to change any settings

You can save the settings for each game with button '2', after setting it to force NTSC. Afterwards if you play the same game again, it will already use the settings you saved before...

Natx15 · Jan 30, 2011

Sorry but, nobody knows what's wrong with my CFG?

I can't download anything from internet (covers, updates) and i can't take screenshots because the Loader just freezes or show a Code Dump.
I can play normally, right, but i think this is something i need to fix.

Budweiser · Jan 30, 2011

Best Loader by far , Thanks for all your hard work

pplucky · Jan 30, 2011

Natx15 said:
Sorry but, nobody knows what's wrong with my CFG?

I can't download anything from internet (covers, updates)

Are you sure that the Wii is correctly connected to the Internet?
Have you tried the links used for updating directly in a browser to check if they are OK?
Have you tried updating wiidbt database instead?

rrestiaux · Jan 30, 2011

Natx15 said:
Sorry but, nobody knows what's wrong with my CFG?

I can't download anything from internet (covers, updates) and i can't take screenshots because the Loader just freezes or show a Code Dump.
I can play normally, right, but i think this is something i need to fix.

I had the same problem after i did update via internet. i downloaded the CFG from here and copied it directly to either the sd card or the HDD. both worked fine for me. I also deleted all my old CFG.

rrestiaux · Jan 30, 2011

pplucky said:
rrestiaux said:

Some games do not work unless i manually change the setting to force NTSC.
is there a setting for this to be automatic?
I upgraded from version 58. v58 i didn't have to change any settings

Click to expand...

You can save the settings for each game with button '2', after setting it to force NTSC. Afterwards if you play the same game again, it will already use the settings you saved before...

Ya that's what i have been doing, it's just a headache to do it that way since you have to re-boot the wii after if the game doesn't work. In version 58, I didn't have to do it manually.
Awesome program either way.

Natx15 · Jan 31, 2011

pplucky said:
Are you sure that the Wii is correctly connected to the Internet?
Have you tried the links used for updating directly in a browser to check if they are OK?
Have you tried updating wiidbt database instead?

Yes, no problem with connexion. (Wiinnercard uptdated correctly).
Links are ok.
Yes, and i get a Code Dump.

QUOTE(rrestiaux @ Jan 30 2011, 06:04 PM) I had the same problem after i did update via internet. i downloaded the CFG from here and copied it directly to either the sd card or the HDD. both worked fine for me. I also deleted all my old CFG.

Well, i don't update via internet, i download the pack from here and change all old for new, the problem stars here.
And yes, i'm sure, no old data remain in SD.

pplucky · Jan 31, 2011

Natx15 said:
Yes, no problem with connexion. (Wiinnercard uptdated correctly).
Links are ok. Why don't you attach your config.txt and settings.cfg here? Maybe it may help understand what may be wrong.

QUOTE(Natx15 @ Jan 31 2011, 02:48 AM) Yes, and i get a Code Dump.

Can you take a picture and put it in here, so that maybe oggzee can take a look at it?

DarkMatterCore · Jan 31, 2011

I don't if this problem is happening only with me, but the partition autodetection isn't working here. The loader keeps saying the recognized partition is invalid, and I have to choose it manually. Maybe the option is broken, again?

Using v65-222, with the IOS222 v4 from Hermes. The same things occurs with the SD card.

freaky · Jan 31, 2011

Does the usbloader support multiple hdd?
I've got an samsung S1 mini 18" (250GB) but the wii freezes with Super MArio and WII Sport Resort

But I can play these games with another USB memory Stick (16GB)

So instead of switching these the every time I would like to use a USB hub...
So before I buy a usb hub...is it possible and which one do I need to buy?

Thanks in advice.

PS the loader is very awsome ;-)

jesquinas · Jan 31, 2011

freaky said:
Does the usbloader support multiple hdd?
I've got an samsung S1 mini 18" (250GB) but the wii freezes with Super MArio and WII Sport Resort

But I can play these games with another USB memory Stick (16GB)

So instead of switching these the every time I would like to use a USB hub...
So before I buy a usb hub...is it possible and which one do I need to buy?

Thanks in advice.

PS the loader is very awsome ;-)

I think that two USB devices (like a hard disk and a pendrive) connected to usb0 port with a hub isnt supported.Anyway you must think why these two games doesnt work fine.I dont think that the problem was the hard disk.

Thx.

Sacohen9665 · Jan 31, 2011

Sacohen9665 said:
I just tried updating CFG from cfg64-compat to cfg65-compat and after rebooting booth systems could not find my USB Drives.

1 system is using a 500GB Western Digital My Book and the othe is using an 8GB USB Jump drive.

When I reverted back to cfg64-compat everything is fine.

So I take it that no one else is having a problem like this?

Any ideas of what maybe causing this issue?

jesquinas · Jan 31, 2011

Two suggestions for oggzee and Dr.Clippers in these "quiet" days:

(i) The first one is a classical for me and I have suggested it more times: I think that showing a concrete cover in the general options (button '1' and button '1') carries to misunderstanding to newbies.

(ii) I think that would be very interesting know the IOS and IOS version used by the game when it is played from disk channel.So when you had a problem with a concrete game that information would be useful for changing the cIOS base.

Thx.

PD: One question: when you dump a original game to USB disk the update partition is removed?

freaky · Jan 31, 2011

jesquinas,

Thank you for your reply.
I will try to find a solution (maybe updating some CIOS .... ?), but I do have the latest configurable usb loader. I've also tested with neogamma and usbloader GX but still the same problems occure.

It is known that some hdd's are not fully supported and offcourse it is strange that the games do not work with 3 different GUI's and they do work with a pendrive ... to me that sounds like a hdd problem

(but i must say....i'm e newbie

)

jesquinas · Jan 31, 2011

freaky said:
jesquinas,

Thank you for your reply.
I will try to find a solution (maybe updating some CIOS .... ?), but I do have the latest configurable usb loader. I've also tested with neogamma and usbloader GX but still the same problems occure.

It is known that some hdd's are not fully supported and offcourse it is strange that the games do not work with 3 different GUI's and they do work with a pendrive ... to me that sounds like a hdd problem

(but i must say....i'm e newbie

)

If you could give us more information....firmware version,partition format,cIOS versions,etc,etc....but I think that the problem is related with your cIOS.

Thx.

Pippin666 · Jan 31, 2011

jesquinas said:
Two suggestions for oggzee and Dr.Clippers in these "quiet" days:

(i) The first one is a classical for me and I have suggested it more times: I think that showing a concrete cover in the general options (button '1' and button '1') carries to misunderstanding to newbies.

(ii) I think that would be very interesting know the IOS and IOS version used by the game when it is played from disk channel.So when you had a problem with a concrete game that information would be useful for changing the cIOS base.

Thx.

PD: One question: when you dump a original game to USB disk the update partition is removed?

No, but when you run a game from a cIOS, the cIOS skips the update partition !!

Pip'

kamiro04 · Jan 31, 2011

jesquinas said:
(ii) I think that would be very interesting know the IOS and IOS version used by the game when it is played from disk channel.So when you had a problem with a concrete game that information would be useful for changing the cIOS base.

Are you looking for something like this http://translate.google.com.ar/translate?u...l=&ie=UTF-8?

jesquinas · Feb 1, 2011

Yes,its correct because I suppose thar the .wbfs file has got inside the IOS used for the game and the minimal version,doesn it?

Natx15 · Feb 1, 2011

pplucky said:
Why don't you attach your config.txt and settings.cfg here? Maybe it may help understand what may be wrong.

Well...the problem it's solved now.

I don't know how but, the lines:
CODEcover_url =+ http://boxart.rowdyruff.net/flat/{ID6}.png
cover_url_3d =+ http://boxart.rowdyruff.net/3d/{ID6}.png
cover_url_disc =+ http://boxart.rowdyruff.net/fulldisc/{ID6}.png

Was missing in the config.txt...so, that's solved all...even screenshots problems...

Sorry by troubles and thanks for all help; btw continue with the awesome job.

harroxelas · Feb 1, 2011

Sorry if this has already been asked but, is there a way to change the gui_style and gui_rows variables while running cfg usb loader?

Hacking Configurable USB Loader

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Member

Member

Well-Known Member

Finding my light.

New Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

SSF43DE Master

Well-Known Member

Well-Known Member

Member

Active Member

Similar threads

Popular threads in this forum