Worst of it is, I did an online update to the very latest beta and is still did the same.... a kinda been there, seen it, done it..... and yes the problem still exists, someone even suggested i ran it directly from hbc but that made no difference.
Still looking for someone who has checked out the forwarder and could possibly/kindly show a pic of it running...
ttfn
sadsack
Still looking for someone who has checked out the forwarder and could possibly/kindly show a pic of it running...
ttfn
sadsack
Don't normally use the forwarder, but installed and tested. The forwarder passes the arguments fine for me when launched, had no problems with it picking up either the default or a selected intro arg from the meta.xml.
After you updated CFG, are you still getting the grey intro screen or the colored default one (default intro was changed starting with Cfg61b)? If you've updated to the latest and still have the grey intro, something isn't right, and almost sounds like maybe the dol didn't update correctly.
Don't think it would make a difference, but I'm launching CFG off SD, not USB.
After you updated CFG, are you still getting the grey intro screen or the colored default one (default intro was changed starting with Cfg61b)? If you've updated to the latest and still have the grey intro, something isn't right, and almost sounds like maybe the dol didn't update correctly.
Don't think it would make a difference, but I'm launching CFG off SD, not USB.
DGenerateKane said:
Yeah, but search times would be eliminated, and thus, fat32 partitions containing an abundancy of small files would get a much better speed when reading stuff... Not to mention the great speed we would achieve in NAND emulation purposes...
No, still the grey intro screen.... even after con usb update.
Thats what makes me think its the forwarder, The forwarder was installed ages ago, and has been working fine, with the little red switch logo, but with the latest beta of config thats when i lost the switch.
Is it possible for you to put up an image showing your forwarder please, as this would be of much help...
ttfn
sadsack
Thats what makes me think its the forwarder, The forwarder was installed ages ago, and has been working fine, with the little red switch logo, but with the latest beta of config thats when i lost the switch.
Is it possible for you to put up an image showing your forwarder please, as this would be of much help...
ttfn
sadsack
This is the current forwarder from the link on the first page:sadsack said:
Though you still won't get the be able to select the red switch logo, that's been removed from the newer dol's. So your options in the meta.xml are: intro=1 (small centered Configurable USB Loader text on black background), intro=2 (Colored "Cfg" logo (default intro) - not the one with the red switch), or intro=3 (larger grey logo screen - the one you don't want)
D
Deleted User
Guest
cfg v61t3 (debug)
cfg61t3.dol
(or online update)
Changes:
cfg v61t3 (debug)
* print more debug info, debug enabled by default
* if home=screenshot then make a screenshot if home is being held for 1 second
otherwise exit to hbc. So a short press on home will exit while holding home
for 1 second will make a screenshot
* possible fix for corrupted console text
NOTE: this is release intended for troubleshooting only, not normal use.
I would like this to be tested by people that experienced problems with 61* series:
- hangs
- mp3 playing
- console corruption
- usb init
It doesn't try to solve COD:BO problems (because it is still built with devkit 22+ogc 185)
I don't remember the exact nicknames of the people with the above problems, but I hope to hear from you.
The debug in this version is enabled by default, since some people had problems enabling it in meta.xml especially in combination with the forwarders.
Using home=screenshot it's possible to get a dump of the debug screen when it asks to press any button, by holding home for 1 second, (note another button has to be pressed after that to continue). Of course if it hangs the screenshot can't be made so I'd like to see a snapshot with a camera or phone or written by hand the last couple of lines (let's say 6).
The debug looks something like this:
cfg61t3.dol
(or online update)
Changes:
cfg v61t3 (debug)
* print more debug info, debug enabled by default
* if home=screenshot then make a screenshot if home is being held for 1 second
otherwise exit to hbc. So a short press on home will exit while holding home
for 1 second will make a screenshot
* possible fix for corrupted console text
NOTE: this is release intended for troubleshooting only, not normal use.
I would like this to be tested by people that experienced problems with 61* series:
- hangs
- mp3 playing
- console corruption
- usb init
It doesn't try to solve COD:BO problems (because it is still built with devkit 22+ogc 185)
I don't remember the exact nicknames of the people with the above problems, but I hope to hear from you.
The debug in this version is enabled by default, since some people had problems enabling it in meta.xml especially in combination with the forwarders.
Using home=screenshot it's possible to get a dump of the debug screen when it asks to press any button, by holding home for 1 second, (note another button has to be pressed after that to continue). Of course if it hangs the screenshot can't be made so I'd like to see a snapshot with a camera or phone or written by hand the last couple of lines (let's say 6).
The debug looks something like this:
ok this is going to sound rhetorical and stupid, but how do i go from a game back to the usb loader so that im not going to the wii menu? i just some clarification on how to do it
From a quick test:oggzee said:
Hangs - Have not experienced
Console corruption - Have not experienced
USB Init - Have not experienced
MP3 playing - .mp3 playing is fine
MOD playing - .mod playing does not work
oggzee said:Bloodlust said:Need some urgent help here. Anyone knows what's wrong? When I launch CFG recently, the text in the GUI is missing...
Looks like you have the same problem as this guy: FoGBaV
This is his first post:
http://gbatemp.net/t147638-configurable-us...t&p=3205686
Check his other posts to see what have we tried ti figure out the problem, but in the end it looked like the drive was problematic:
QUOTE(FoGBaV @ Oct 25 2010, 04:52 PM) oggzee !
I found that f*** bug - not displaying this f** chars in the console ...
It's that f*** harddisc ... or some game there ...
i exchanged the hdd with another one ... and options and menue is back !
Yehaaaa !
Bloodlust and FoGBaV, please try 61t3 and let me know if the console is still corrupted?
I love this loader but there's only ONE HUGE PAIN about it..
Why can't I set a GLOBAL setting that forces NTSC for ALL Games in a single setting like other loaders?
Something like this shouldn't take more than a few lines of code?
It's impossible to keep individually setting 100 PAL games through trial and error if I ever lose the settings.
Why can't I set a GLOBAL setting that forces NTSC for ALL Games in a single setting like other loaders?
Something like this shouldn't take more than a few lines of code?
It's impossible to keep individually setting 100 PAL games through trial and error if I ever lose the settings.
EDIT: Please disregard my previous comments regarding COD...was running some differnet setups lately and ios's were not what I thougth they were. You're correct, there is no change with cfg51t3. My mp3/mod findings are still valid though.oggzee said:
Funnily enough I've just gone back to con usb loader v52, because I suffered from IOS 249 Error = CIOS 249 rev 18, cios 222v4, cios 223v4, ect ect and it ended with upgrade ios 249 and set -frag = -128 error = setwbfs = -128
so I deleted my boot.dol from my apps/usb loader folder and replaced it with my backup .dols and everything is back to normal, I was obviously using the wrong .dol file but for now it's working again so i'm not to worried.
Yes Buddy, that's what I get when I run my old Forwarder, that's the same screen. but on my main screen it looks like:
SD into USB Logo
after running forwarder
Con Usb Loader Running
Does The New Version look anything like these?..
ttfn
sadsack
so I deleted my boot.dol from my apps/usb loader folder and replaced it with my backup .dols and everything is back to normal, I was obviously using the wrong .dol file but for now it's working again so i'm not to worried.
Yes Buddy, that's what I get when I run my old Forwarder, that's the same screen. but on my main screen it looks like:
SD into USB Logo
after running forwarder
Con Usb Loader Running
Does The New Version look anything like these?..
ttfn
sadsack
QUOTE said:
USB Init - I had problems with lots of the new builds for this, had to keep switching my USB drive off/on at the splash screen, then it would load, this version seems to load ok with each button press and I don't need to keep switching off/on.
Might have jumped too soon, I have now gone back to 61b2 to get rid of debug info, and this loads ok too, now the only setting I have altered is simple=1 to stop my kids deleting things. this setting seems to have also helped my USB drive initialising and loading. Unless you fixed the USB thing in this version?
