Hacking STOP - Exclusivity - Firmware for DSTTi 1.4.1

AUGIO

Active Member
Newcomer
Joined
Oct 14, 2010
Messages
27
Trophies
0
XP
3
Country
Italy
bitonio6 said:
All the DSTTi directly 1.4 compatible = RED PCB, so it is totaly normal

But, i imagine you have exacetly the same hardware then a RED PCB without number on the back

Bitonio , news from your contact in www.ndstt.com ?

my two cards :

A) 1A920587 – 010207DA
B) 5E506610 – 1D0107DA

have the red PCB ( I can see the colour in the rear side , near the connector - I can read also two numbers in correspondence of the 9th and 11th pin - respectively 4 and 2 if you start to count from left ) , but I can't upgrade.

Regards
 

undertoe

Active Member
Newcomer
Joined
Sep 15, 2009
Messages
25
Trophies
0
XP
125
Country
bitonio6 said:
for people, for who the firmware 1.4.1 dont work

give me the number on the back...

for me, i tested the serie "240A504B" et it is recognize like a FAKE!


So are these cards really fakes? No way to update to 1.41 ?
 

bitonio6

Well-Known Member
OP
Member
Joined
Sep 30, 2009
Messages
1,801
Trophies
0
XP
47
Country
Swaziland
undertoe said:
bitonio6 said:
for people, for who the firmware 1.4.1 dont work

give me the number on the back...

for me, i tested the serie "240A504B" et it is recognize like a FAKE!


So are these cards really fakes? No way to update to 1.41 ?

Some work and other dont, you need to try!
 

s_packer

New Member
Newbie
Joined
Nov 15, 2010
Messages
4
Trophies
0
XP
1
Country
United States
bitonio6 said:
Your DSTTi is in 1.4 and your DSi XL is in 1.4.1
So you need a DSi in 1.4 or DS/DSLite to do the upgrade!

Hi I have the same problem. My daughter has 'accidentally'
rolleyes.gif
upgraded her DSi to Version 1.4.1E -then brought the unit to me to say 'look, it's not working anymore' !!

When you say 'you need a DSi in 1.4 or DS/DSLite to do the upgrade!' - I have a DSLite - and when I put the TTDS card into that, with your TTi141UPGRADE.nds & rom_pcb2.dat (I have a red PCB card, no writing on the back) - it works fine. Do these two files replace files that are already on the card? I currently have on there:-

DSi GAMES (folder)
TTMenu (folder)
TTMENU.dat
TTMENU.sys
TTi141UPGRADE.nds
rom_pcb2.dat


However when I put the same card into the DSi - i get the black screen appear telling me to restart - therefore I think I'm mis-understanding what you're suggesting - what exactly do I need to do to get the card working on the DSi ? I'm struggling to fathom the method I need to use to get from where I am now, to a working card in the DSi?

I'm a newbie, as you can see, so please go easily on me!! My daughter does have a habit of losing original cartridges - probably 5 to date - and the TTDS is a god-send..please help!
 

Kwigg

Well-Known Member
Member
Joined
Sep 25, 2010
Messages
112
Trophies
0
Location
Lancashire
Website
Don't have one
XP
37
Country
s_packer said:
bitonio6 said:
Your DSTTi is in 1.4 and your DSi XL is in 1.4.1
So you need a DSi in 1.4 or DS/DSLite to do the upgrade!

Hi I have the same problem. My daughter has 'accidentally'
rolleyes.gif
upgraded her DSi to Version 1.4.1E -then brought the unit to me to say 'look, it's not working anymore' !!

When you say 'you need a DSi in 1.4 or DS/DSLite to do the upgrade!' - I have a DSLite - and when I put the TTDS card into that, with your TTi141UPGRADE.nds & rom_pcb2.dat (I have a red PCB card, no writing on the back) - it works fine. Do these two files replace files that are already on the card? I currently have on there:-

DSi GAMES (folder)
TTMenu (folder)
TTMENU.dat
TTMENU.sys
TTi141UPGRADE.nds
rom_pcb2.dat


However when I put the same card into the DSi - i get the black screen appear telling me to restart - therefore I think I'm mis-understanding what you're suggesting - what exactly do I need to do to get the card working on the DSi ? I'm struggling to fathom the method I need to use to get from where I am now, to a working card in the DSi?

I'm a newbie, as you can see, so please go easily on me!! My daughter does have a habit of losing original cartridges - probably 5 to date - and the TTDS is a god-send..please help!
My best advice is see if it still works in the ds lite and try it again.

Or if you want something very easy to fix, get the supercard DSOnei.
Why? it has high compatibility AND if you update, it uses a USB firmware writer so you only need a pc to update your card. Neat huh?
I suggest getting it her for christmas and you keeping/selling the TTDS.
You can get it off shoptemp
 

s_packer

New Member
Newbie
Joined
Nov 15, 2010
Messages
4
Trophies
0
XP
1
Country
United States
Kwigg said:
s_packer said:
bitonio6 said:
Your DSTTi is in 1.4 and your DSi XL is in 1.4.1
So you need a DSi in 1.4 or DS/DSLite to do the upgrade!

Hi I have the same problem. My daughter has 'accidentally'
rolleyes.gif
upgraded her DSi to Version 1.4.1E -then brought the unit to me to say 'look, it's not working anymore' !!

When you say 'you need a DSi in 1.4 or DS/DSLite to do the upgrade!' - I have a DSLite - and when I put the TTDS card into that, with your TTi141UPGRADE.nds & rom_pcb2.dat (I have a red PCB card, no writing on the back) - it works fine. Do these two files replace files that are already on the card? I currently have on there:-

DSi GAMES (folder)
TTMenu (folder)
TTMENU.dat
TTMENU.sys
TTi141UPGRADE.nds
rom_pcb2.dat


However when I put the same card into the DSi - i get the black screen appear telling me to restart - therefore I think I'm mis-understanding what you're suggesting - what exactly do I need to do to get the card working on the DSi ? I'm struggling to fathom the method I need to use to get from where I am now, to a working card in the DSi?

I'm a newbie, as you can see, so please go easily on me!! My daughter does have a habit of losing original cartridges - probably 5 to date - and the TTDS is a god-send..please help!
My best advice is see if it still works in the ds lite and try it again.

Or if you want something very easy to fix, get the supercard DSOnei.
Why? it has high compatibility AND if you update, it uses a USB firmware writer so you only need a pc to update your card. Neat huh?
I suggest getting it her for christmas and you keeping/selling the TTDS.
You can get it off shoptemp

Hi - if I buy the Supercard DSOnei - will it work 'out of the box' and get me where I need to be? ie working in the Dsi 1.4.1E - or will I have to apply the fixes/patches/upgrades to get there - which is kind of where I am now? cheers
 

bitonio6

Well-Known Member
OP
Member
Joined
Sep 30, 2009
Messages
1,801
Trophies
0
XP
47
Country
Swaziland
s_packer said:
bitonio6 said:
Your DSTTi is in 1.4 and your DSi XL is in 1.4.1
So you need a DSi in 1.4 or DS/DSLite to do the upgrade!

Hi I have the same problem. My daughter has 'accidentally'
rolleyes.gif
upgraded her DSi to Version 1.4.1E -then brought the unit to me to say 'look, it's not working anymore' !!

When you say 'you need a DSi in 1.4 or DS/DSLite to do the upgrade!' - I have a DSLite - and when I put the TTDS card into that, with your TTi141UPGRADE.nds & rom_pcb2.dat (I have a red PCB card, no writing on the back) - it works fine. Do these two files replace files that are already on the card? I currently have on there:-

DSi GAMES (folder)
TTMenu (folder)
TTMENU.dat
TTMENU.sys
TTi141UPGRADE.nds
rom_pcb2.dat


However when I put the same card into the DSi - i get the black screen appear telling me to restart - therefore I think I'm mis-understanding what you're suggesting - what exactly do I need to do to get the card working on the DSi ? I'm struggling to fathom the method I need to use to get from where I am now, to a working card in the DSi?

I'm a newbie, as you can see, so please go easily on me!! My daughter does have a habit of losing original cartridges - probably 5 to date - and the TTDS is a god-send..please help!

You need only, the TTMENU Folder and the TTMENU.DAT from the officiel 1.17 kernel + My pack with the 3 files!!!

And after that, it will work on any DSi and DSi XL
 

s_packer

New Member
Newbie
Joined
Nov 15, 2010
Messages
4
Trophies
0
XP
1
Country
United States
Hi Bitonio - I have taken your files (4 in total - rom_pcb0, rom_pcb1, rom_pcb2, and TTi141UPGRADE.nds) - and then downloaded (what I think is the correct Kernel) TTMenu Kernel v1.17, 2009-01-06 from http://www.ndstt.com/download.html - extracted the files - and copied the TTMENU folder and TTMENU.DAT across to the card too; so I now have on the card:-

rom_pcb0
rom_pcb1
rom_pcb2
TTI141UPGRADE.nds
TTMenu (folder)
TTMENU.DAT

...but still....black screen error message "An error has occurred"...etc

I did read somewhere yesterday that I needed a Nintendo DS to run this Firmware update through before I could use it on the DSi - is that irrelevant to what I'm trying to do here? thanks
 

bitonio6

Well-Known Member
OP
Member
Joined
Sep 30, 2009
Messages
1,801
Trophies
0
XP
47
Country
Swaziland
s_packer said:
Hi Bitonio - I have taken your files (4 in total - rom_pcb0, rom_pcb1, rom_pcb2, and TTi141UPGRADE.nds) - and then downloaded (what I think is the correct Kernel) TTMenu Kernel v1.17, 2009-01-06 from http://www.ndstt.com/download.html - extracted the files - and copied the TTMENU folder and TTMENU.DAT across to the card too; so I now have on the card:-

rom_pcb0
rom_pcb1
rom_pcb2
TTI141UPGRADE.nds
TTMenu (folder)
TTMENU.DAT

...but still....black screen error message "An error has occurred"...etc

I did read somewhere yesterday that I needed a Nintendo DS to run this Firmware update through before I could use it on the DSi - is that irrelevant to what I'm trying to do here? thanks

1/ You have an original DSTTi ?
2/ if you put all these files on a microSD = it's okay,
but if you believe your dstti will work directly with these files on a DSi 1.4.1 = you make a mistake!!!

When you have all these files on your microSD,
put the microSD inside the DSTTi you have and put the DSTTi inside à DS/DSLite/Dsi 1.3Max
 

s_packer

New Member
Newbie
Joined
Nov 15, 2010
Messages
4
Trophies
0
XP
1
Country
United States
bitonio6 said:
s_packer said:
Hi Bitonio - I have taken your files (4 in total - rom_pcb0, rom_pcb1, rom_pcb2, and TTi141UPGRADE.nds) - and then downloaded (what I think is the correct Kernel) TTMenu Kernel v1.17, 2009-01-06 from http://www.ndstt.com/download.html - extracted the files - and copied the TTMENU folder and TTMENU.DAT across to the card too; so I now have on the card:-

rom_pcb0
rom_pcb1
rom_pcb2
TTI141UPGRADE.nds
TTMenu (folder)
TTMENU.DAT

...but still....black screen error message "An error has occurred"...etc

I did read somewhere yesterday that I needed a Nintendo DS to run this Firmware update through before I could use it on the DSi - is that irrelevant to what I'm trying to do here? thanks

1/ You have an original DSTTi ?
2/ if you put all these files on a microSD = it's okay,
but if you believe your dstti will work directly with these files on a DSi 1.4.1 = you make a mistake!!!

When you have all these files on your microSD,
put the microSD inside the DSTTi you have and put the DSTTi inside à DS/DSLite/Dsi 1.3Max

Hi Bitonio

It worked!! You have gained instant 'legend' status in my household!! Many thanks for the advice, much appreciated - karma winging it's way to you!!


grog.gif
 

undertoe

Active Member
Newcomer
Joined
Sep 15, 2009
Messages
25
Trophies
0
XP
125
Country
I have a heap of DSTTi with 240A5048 at the top and all are reported fake.
frown.gif


a sample

240A5048
088036DA

240A5048
088247DA

240A5048
088461Da

If these cards are not fake (I got them from the same supplier that all my orginal DSTT cards came from in the past) why doesn't DSTT team add support for this PCB? Are they still active or long since disbanded?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Maximumbeans @ Maximumbeans: butte