Hacking Acekard 2.1 no icon, double white screen

ParryPerson · Aug 13, 2010

I put it in, and I get no icon, and blank description. If I try to load it, I get double white screens.
I'm running AKAIO 1.7 and have put the THICKEST POSSIBLE paper on the back, and get the same problem, cleaned the contacts, same problem.

I used to be able to push the top of the AK2 back and it would work, but now, that isn't even possible.

Paper didn't work, am I just screwed?

GolenSun550 · Aug 13, 2010

It might be contact issue .
http://gbatemp.net/index.php?showtopic=218103

ParryPerson · Aug 13, 2010

If it is, the paper trick does not work at all. I make it so thick you can barely even pull it out, and I get the same problem.

I use my girls AK2i and it works fine.

Shinigami357 · Aug 13, 2010

wasn't there a bad batch of ak2.1's that only work with a particular version of the AKAIO firmware?

ParryPerson · Aug 13, 2010

Shinigami357 said:
wasn't there a bad batch of ak2.1's that only work with a particular version of the AKAIO firmware?

It was fixed. I randomly get it to play, but not for long. It worked fine for a while.

I'm selling this piece of shit and getting a AK2i. My girls works fine in mine.

tk_saturn · Aug 13, 2010

Have you tried my other Paper trick? place piece of paper underneath the PCB, not at the back.

ParryPerson · Aug 13, 2010

tk_saturn said:
Have you tried my other Paper trick? place piece of paper underneath the PCB, not at the back.

Yes, and still no icon or descript, and double white screen.

I've made it so thick I had trouble getting it out sometimes, no matter how much pressure was applied. I'm guessing it's just a really crummy cart. It worked a lot better when I first got it, then after a while, I had to press on the cart, pushing the contacts a little closer together to get it to load, now, it just refuses to play at all. Sometimes I can get the AK2 logo, but when I go to load it, double white.

I should have never ordered the 2.1.

tk_saturn · Aug 13, 2010

Check the contacts on the DS, also check a retail cart works.

You should have clips on the AK2.1 which should allow you to remove the PCB. Try removing the PCB and give it a clean with alcohol etc.

ParryPerson · Aug 14, 2010

tk_saturn said:
Check the contacts on the DS, also check a retail cart works.

You should have clips on the AK2.1 which should allow you to remove the PCB. Try removing the PCB and give it a clean with alcohol etc.

Retail carts work perfect, contacts and inside all cleaned twice, still the same result.

No worries, I already ordered a replacement.

Hacking Acekard 2.1 no icon, double white screen

Member

Well-Known Member

Member

Current "give a fuck" level: Honey Badger

Member

Well-Known Member

Member

Well-Known Member

Member

Similar threads

Popular threads in this forum