windy2000 said:QUOTE said:Here's a way to install HBC natively on the SNEEK NAND:
1. Delete HBC completely from your Sneek Nand (or never have it installed)
2. Install this wad to your sneek nand (using showmiiwads): HBC Installer - HBCI.wad
3. It will load, in this order: usb:/boot.elf, usb:/apps/hackmii_installer_v0.6/boot.elf, sd:/boot.elf, sd:/apps/hackmii_installer_v0.6/boot.elf
4. Now HBC should install to your Sneek nand through the normal installer.
Follow the awesome guide, I setup uneek successfully, and update it to 4.2u. Thank you guys....
In virgin nand, I install "HBC Installer - HBCI.wad" with showmiiwads, and put hackmii_installer_v0.6's boot.elf to the both root of sd and usb, but when I run the channle it's just cause the sim-nand restart and nothing happened....
I try to hack the sim-nand with bannerbomb, but it frozen in scam screen (I've waited for a half hour, no "Press 1 to continue" appeared). With the Multi-Mod Manager I delete all of the stub IOS, but it always hangs when update IOS or TBR, it seems that the sim-nand is refuse to be writen...
I am puzzle, someone help me, thank you !
The-Lion said:That's great to hear. But the first time it took over 10 minutes after the press A screen and the menu still wasn't loaded. So I turned the Wii off. After a reboot the Wii freezes when you press the A button.
drmarvin said:windy2000 said:QUOTE said:Here's a way to install HBC natively on the SNEEK NAND:
1. Delete HBC completely from your Sneek Nand (or never have it installed)
2. Install this wad to your sneek nand (using showmiiwads): HBC Installer - HBCI.wad
3. It will load, in this order: usb:/boot.elf, usb:/apps/hackmii_installer_v0.6/boot.elf, sd:/boot.elf, sd:/apps/hackmii_installer_v0.6/boot.elf
4. Now HBC should install to your Sneek nand through the normal installer.
Follow the awesome guide, I setup uneek successfully, and update it to 4.2u. Thank you guys....
In virgin nand, I install "HBC Installer - HBCI.wad" with showmiiwads, and put hackmii_installer_v0.6's boot.elf to the both root of sd and usb, but when I run the channle it's just cause the sim-nand restart and nothing happened....
I try to hack the sim-nand with bannerbomb, but it frozen in scam screen (I've waited for a half hour, no "Press 1 to continue" appeared). With the Multi-Mod Manager I delete all of the stub IOS, but it always hangs when update IOS or TBR, it seems that the sim-nand is refuse to be writen...
I am puzzle, someone help me, thank you !
I have had the same issue with installing HBC. I installed the Installer with ShowMiiWads, and it's there, and the file is on the USB (I'll try the SD now), but it just exits to the SM again.
Any ideas?
OverjoY said:drmarvin said:windy2000 said:QUOTE said:Here's a way to install HBC natively on the SNEEK NAND:
1. Delete HBC completely from your Sneek Nand (or never have it installed)
2. Install this wad to your sneek nand (using showmiiwads): HBC Installer - HBCI.wad
3. It will load, in this order: usb:/boot.elf, usb:/apps/hackmii_installer_v0.6/boot.elf, sd:/boot.elf, sd:/apps/hackmii_installer_v0.6/boot.elf
4. Now HBC should install to your Sneek nand through the normal installer.
Follow the awesome guide, I setup uneek successfully, and update it to 4.2u. Thank you guys....
In virgin nand, I install "HBC Installer - HBCI.wad" with showmiiwads, and put hackmii_installer_v0.6's boot.elf to the both root of sd and usb, but when I run the channle it's just cause the sim-nand restart and nothing happened....
I try to hack the sim-nand with bannerbomb, but it frozen in scam screen (I've waited for a half hour, no "Press 1 to continue" appeared). With the Multi-Mod Manager I delete all of the stub IOS, but it always hangs when update IOS or TBR, it seems that the sim-nand is refuse to be writen...
I am puzzle, someone help me, thank you !
I have had the same issue with installing HBC. I installed the Installer with ShowMiiWads, and it's there, and the file is on the USB (I'll try the SD now), but it just exits to the SM again.
Any ideas?
Install IOS61 from NUS with ShowMiiNand
How do you get multi-bin files from an .iso ?gameking66 said:How do you extract part.bin files? (I know they're only supported r78 and under).
Means you either don't have boot2.bin or it's built incorrectly.Lyker said:Tried using this guide. But the screen is black and the drivebay flash: short, long, long.
What does that meen?
cthg said:Make sure the sneek partition is the first partition on the disk... in other words: delete all partitions then format the sneek fat32 partition first then make all other partitions.primetime83 said:diddy81 said:primetime83 said:Anyone get SNEEK+DI working with rev 80?
I created a virgin US NAND and updated to 4.2 (Thanks to this guide!) and got SNEEK to work on rev 80. But once I use boot2_di.bin (renamed to boot2.bin) and di.bin, i just get a black screen (no health warning).
I swapped it with the modded version by conanac and this works. Anyone have any ideas?
i had this problem
i fixed it by making my sneek stuff on usb my primary partition worked first time after that
I made my FAT32 partition as the active primary partition and my WBFS as primary partition (don't know how to change it to something else) and still doesn't work. Does it not like the WBFS partition?
I used to get that error also but it's only because python needs set in the PATH system variables. It never kept me from building a valid SNEEK of any kind. I believe it only pertains to the armboot.bin only. Once I put python I still get an server import error so I said piss on it I'll just go grab the armboot from the google code page.primetime83 said:Ok so I tried your suggestion still no luck. I noticed when I run build_boot2.cmd. I get 1 error message near the end
make[1]: Leaving directory `/e/SNEEK/mini-tree-mod/elfloader'
MAKEBIN armboot.bin
make: python: Command not found
make: *** [armboot.bin] Error 127
make: Leaving directory `/e/SNEEK/mini-tree-mod'
Will this matter? I thought we use the armboot.bin rev 47 from the google page