Hacking Custom IOSX rev18 Installer released

Anonymodude · Feb 28, 2010

sindrik said:
Anonymodude said:

sorry , i was just really annoyed when that guy called me a n00b, thats all

Click to expand...

You're still a n00b if you believe using CAPS most of the time and over-using emoticons help you look more 'cool and experienced'. Anyway, using this over rev17, works great. Thanks wanin for the release, hopefully this will keep improving.

i didnt say it made me look more cool and experienced

i just wanted to show that other dude that i know a few things about homebrew just like him and i wanted him to know that i was serious about it too!! EDIT: i overused smileys because i wanted him to know how i was feeling when i said the stuff i did, but it doesnt matter now...

i tested cios rev18 and it works great and so does NeoGamma R8 RC3 in conjunction!! thanks waninkoko!

rumsey · Feb 28, 2010

a heads up, USB loader GX and wiiflow both work with r18.
AFAIK none of the loaders work with SNEEK.

KiiWii · Feb 28, 2010

+1.

Wiiflow works flawlessly with r18

jpref · Feb 28, 2010

rumsey said:
a heads up, USB loader GX and wiiflow both work with r18.
AFAIK none of the loaders work with SNEEK.

Installed as what CIOS (38, 57, 60 , 70 ) ? . I think this should be posted with each working/not working to help everyone out.

borissaid · Feb 28, 2010

ios 57 base worked in wiiflow for me.

Ryufushichou · Feb 28, 2010

i installed with IOS38 as base, and now Wadmanager, Neogamma, Softchip have all died on me T.T Any Ideas?

OtakuGamerZ · Feb 28, 2010

rumsey said:
Okay I need someone who is USING SNEEK to do some testing for me.
1) Have you got this installed?
2) What IOS did you use to install? (not the base ios...)
3) Was it trucha patched
4) If yes to question 1, can you try running the installer again and use IOS249 for the installation
5) Did it hang for you too?

I'm on SNEEK with a 4.2U nand
1) Yes
2) 36 v3351, The same IOS I use to install WADs in SNEEK.
3) No, (I think) my HBC is running off of 36 and it isn't upside down. If it was trucha'd it woulds upside down right?
4) Trying...
5) Yup, It said "Loading..." never finished and wiimote disconnected

pepxl · Feb 28, 2010

QUOTE said:

let the pandemic begin

cobleman · Feb 28, 2010

Vincent Valentine said:
i installed with IOS38 as base, and now Wadmanager, Neogamma, Softchip have all died on me T.T Any Ideas?

Did you use a SDHC i did to and it didnt work then i used standard SD and it worked

Ryufushichou · Feb 28, 2010

cobleman said:
Vincent Valentine said:

i installed with IOS38 as base, and now Wadmanager, Neogamma, Softchip have all died on me T.T Any Ideas?

Click to expand...

Did you use a SDHC i did to and it didnt work then i used standard SD and it worked

Ok now you have lost me, what do you mean to install the cIOS? or to run them, cause i had wads installed for the channels and no, i used a normal SD to install.

rumsey · Feb 28, 2010

jpref said:
rumsey said:

a heads up, USB loader GX and wiiflow both work with r18.
AFAIK none of the loaders work with SNEEK.

Installed as what CIOS (38, 57, 60 , 70 ) ? . I think this should be posted with each working/not working to help everyone out.

Okay, I meant base57 should work with GX and wiiflow.
I have tried base37, 38, AND 57 in SNEEK and none will boot games. (although GX will show you your game list so you know the IOS is working.)

OtakuGamerZ said:

QUOTE(rumsey @ Feb 27 2010, 04:48 PM)

Click to expand...

Okay I need someone who is USING SNEEK to do some testing for me.
1) Have you got this installed?
2) What IOS did you use to install? (not the base ios...)
3) Was it trucha patched
4) If yes to question 1, can you try running the installer again and use IOS249 for the installation
5) Did it hang for you too?

Click to expand...

I'm on SNEEK with a 4.2U nand
1) Yes
2) 36 v3351, The same IOS I use to install WADs in SNEEK.
3) No, (I think) my HBC is running off of 36 and it isn't upside down. If it was trucha'd it woulds upside down right?
4) Trying...
5) Yup, It said "Loading..." never finished and wiimote disconnected

This confirms my suspicions. I imagine there will be several people who used this "install method" thinking it was installed properly when it really wasn't. In order to get this to work right I had to use any title deleter to delete ios249 and 250. Then I ran the installer again using ios36 with base57, after that installation I was able to run the installer again and select 249 (if I wanted) without it hanging, and this is how I knew it was finally installed correctly.
A note - all this was done in sneek.

edit: also pertaining to number 3, trucha wouldn't flip your HBC and I've since found it doesn't make a difference if you are trucha'd or not since the ES spoofing of SNEEK will let this install work no matter what. I suggest you copy what I did above to ensure your ios installed properly.

dlf · Feb 28, 2010

Would anyone know why when I try to load configurable I get stuck on the intro screen with with lights on (or not one) my Wiimote? I tried with 37 & 38. . .

cobleman · Feb 28, 2010

Vincent Valentine said:
cobleman said:

Vincent Valentine said:

i installed with IOS38 as base, and now Wadmanager, Neogamma, Softchip have all died on me T.T Any Ideas?

Click to expand...

Did you use a SDHC i did to and it didnt work then i used standard SD and it worked

Click to expand...

Ok now you have lost me, what do you mean to install the cIOS? or to run them, cause i had wads installed for the channels and no, i used a normal SD to install.

When i was useing wad manager after installing new cios249 i lost SDHC compatability and wad manager was coming up with error -1

rmbell · Feb 28, 2010

dlf said:
Would anyone know why when I try to load configurable I get stuck on the intro screen with with lights on (or not one) my Wiimote? I tried with 37 & 38. . .

it needs to be updated i believe.

TheShadowRunner · Feb 28, 2010

same, wad manager throwing error -1 now.. i installed rev18 with all default settings.
Going back to rev17 for now I guess..

dlf · Feb 28, 2010

Configurable, or Rev 18? Guess I could try other loaders as well.

icebrg5 · Feb 28, 2010

So is it the cios thats causing problems with wad manager or is it because wad manager needs updated now?

poppa0808 · Feb 28, 2010

giantpune said:
for whoever cares, i installed this as 57 base. then dumped the whole nand and run it in sneek. i can start the cIOS in sneek, but it freezes shortly and the wiimote doesnt sync. i'd like somebody to confirm, but it seems that at least this combination doesnt run in my version of sneek.

I encountered a similar problem. Upgraded from 17 to 18 using 57 as my new base. Then the wiimotes stopped syncing. I rebooted twice or three times still no luck. Then magically they worked again after I left it off for a few minutes. Went back to cios38v17 by restoring from nand backup -- I always backup just before a big change.

WiiUBricker · Feb 28, 2010

icpmattj said:
So is it the cios thats causing problems with wad manager or is it because wad manager needs updated now?

You can install wads with Hermes cIOS too, no IOS249/250 necessary.

pepxl · Feb 28, 2010

guys try YAWMM it has a fix for Rev18 apparently

http://code.google.com/p/yawmm/source/list

Hacking Custom IOSX rev18 Installer released

Active Member

Well-Known Member

Editorial Team

Well-Known Member

Well-Known Member

I'm Not British, I'm Just Gay!

Well-Known Member

GFX W!Z4RD

Well-Known Member

I'm Not British, I'm Just Gay!

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

I'm like you, I have no name.

Well-Known Member

Well-Known Member

Member

News Police

GFX W!Z4RD

Similar threads

Popular threads in this forum